SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Oil paints for weathering

4815 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2011
Oil paints for weathering
Posted by modeler_zack on Tuesday, October 25, 2011 8:02 AM

Hi all,

Im looking at stopping at Michael's today to pick up a set of oil based paint used weathering while my 50% coupon is still valid. 

What colors should I look for? This is my current project http://svsm.org/gallery/37mm_pak-35-36

  • Member since
    March 2003
  • From: Fort Worth, TX
Posted by RESlusher on Tuesday, October 25, 2011 8:52 AM

I don't know if I'd go for a "set" of oils.  There will probably end up being a lot of it that you won't use.

I'd go with Burnt Umber, Raw Umber, Burnt Siena and/or Raw Siena.  Stay away from Black.  It's too stark!  Stick with the colors that look like dirt.  Maybe something along the lines of a "sandy" kinda color too.

Just my 2 cents though...Save your 50% coupon for the big a$$ed B-29 we all have in our stash!  Cool

 

Richard S.

On the bench:  AFV Club M730A1 Chaparral

On deck:  Tamiya Marder 1A2

In the hole:  Who knows what's next!

 

  • Member since
    August 2006
  • From: Arkansas
Posted by K-dawg on Tuesday, October 25, 2011 9:35 AM

Buff Titanium is another great color for dust.

Kenneth Childres, Central Arkansas Scale Modelers

  • Member since
    March 2003
  • From: Virginia
Posted by Wingman_kz on Tuesday, October 25, 2011 9:06 PM

Kinda hate to say it but two weeks ago they had a coupon for 40% off your entire purchase of oils, acrylics, etc. I used it to pick up some Winsor Newton oils. Of course you can do that one tube at a time, it was just nice to be able to do it all at once. I'd been using a set of cheap oils from WalMart and they weren't really worth the effort.

Tony

            

  • Member since
    October 2011
Posted by modeler_zack on Wednesday, October 26, 2011 7:21 PM

Really wingman, you had to tell me that? :P

Its no problem. Ill just play their game and build the paints up one at a time, after all, I pass the store almost daily. I dont need the paint at the moment, so its no problem doing the one buy a day. 

Thanks for the recommended colors. I looked at what walleyworld had to offer in oil, and the quality looked sketchy at best. I'll stick with winser and neuton. 

  • Member since
    March 2003
  • From: Virginia
Posted by Wingman_kz on Wednesday, October 26, 2011 10:05 PM

Sorry about that. Those coupons may have been out before but it's the first time I had seen it. The WalMart paints would turn to a chalky white with a slight tint of whatever color I was using. They would also almost immediately fall out of suspension. Maybe it's just this set but I wasn't going to buy anymore to find out.

Tony

            

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Friday, October 28, 2011 1:52 PM

You can get a starter set of oils that contain 10 colors in 12 ml tubes for about 6 bucks with the 40% off coupon at Hobby Lobby...  I'd imagine that Michael's has something similar... Hobby Lobby has the 40% coupon come up about every two-three  weeks, even more often as the holidays approach. 

Just make sure that the set contains Yellow Ochre, Burnt Umber, White, and Black, at a minumum... 12 ml tubes will last years, so the 21ml and up sizes aren't needed for weathering... When you decide to do figures, the flesh colors can be mixed, including the pink shades for the lips, from that same set, since you'll also have crimson and red and you won't need to drop yet MORE money for another type of paint..

You'll need the white for the pink shades, and black will always be needed, regardless.. You may not find much use for the blue and ultramarine yet, but eventually, it'll happen (especially if you start shading Luftwaffe Feld Blau)... The yellow will alwas be needed if you do any shades of blonde hair,  as will the black, Burnt Umber, etc..

I've had the same set for about three years and have used every color in it, plus mixed a dozen more... They're an excellent value, and once you get past the initial "But it's for ARTISTS!" -reaction, it'll all make sense and you can stop recoiling in horror, lol..

Keep in mind that you'll need a clear flat too, since they dry semi-gloss... 

 

 

 

  • Member since
    March 2010
  • From: Democratic Peoples Republic of Illinois
Posted by Hercmech on Friday, October 28, 2011 2:15 PM

i just can't get the hang of oils. I use them but they never come out the way I see them done on here. I either put them on too thick or they just don't look right


13151015

  • Member since
    November 2008
  • From: Jefferson City, MO
Posted by iraqiwildman on Friday, October 28, 2011 2:32 PM

Here are some youtube videos about using oils

http://www.youtube.com/watch?v=y4zi37dMMSY&feature=related

http://www.youtube.com/watch?v=kOLcQVBa87E&feature=related

Last night, I tried the color variation like in the first video and really liked the results.

Tim Wilding

  • Member since
    March 2010
  • From: Democratic Peoples Republic of Illinois
Posted by Hercmech on Friday, October 28, 2011 2:51 PM

iraqiwildman

Here are some youtube videos about using oils

http://www.youtube.com/watch?v=y4zi37dMMSY&feature=related

http://www.youtube.com/watch?v=kOLcQVBa87E&feature=related

Last night, I tried the color variation like in the first video and really liked the results.

Thanks Brother!


13151015

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.