SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Mild solvent for oil paint washes?

906 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2011
Mild solvent for oil paint washes?
Posted by Chrisk-k on Tuesday, February 28, 2012 2:29 PM

I'm new to washes and need some help.

What solvent is mild and less toxic? Mona Lisa? Or, odorless mineral spirits sold at home depot? Or, something else?

The reason why I'm asking is that with a mild solvent (1) I will less likely to damage the base coat, and (2) my health will suffer less :-) 

Iwata HP-CS | Iwata HP-CR | Iwata HP-M2 | H&S Evolution | Iwata Smart Jet + Sparmax Tank

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, February 28, 2012 2:40 PM

Provideing the coat you are applying the wash to isn't enamel, you won't damage it. I use normal White Spirits to thinn my oil paint have have only had a problem when i didn't cover the enamel base correctly.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Tuesday, February 28, 2012 2:55 PM

Mona Lisa is very gentle...used it over enamel without damaging it. It also goes great with Bloody Mary mix...Toast

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, February 28, 2012 3:14 PM

Doogs, whats is this Mona Lisa. I haven't heard of it, not in this context.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Tuesday, February 28, 2012 3:25 PM

Mona Lisa Odorless Thinner...pretty widely available here in the US - I've seen it at Hobby Lobby, Michaels, the local art supply store, etc. I believe it's actually a brand of odorless turpenoid, but it's very not-harsh and I've found it ideal when working with oils.

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, February 28, 2012 4:06 PM

Thanks, i will have to see if i can find it over here. Might help avoid any more accidents.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    December 2011
Posted by Chrisk-k on Tuesday, February 28, 2012 4:20 PM

I use Tamiya acrylic paints as base coats and will use a Vallejo acrylic glossy top coat as a base for decaling and pin washes.  I've read that an acrylic paint, once fully dried, will survive an oil paint thinner.  This is true, isn't it? About 20 years ago I was into oil painting (with turpentine) and I still remember the viscious, toxic odor of turp.

Iwata HP-CS | Iwata HP-CR | Iwata HP-M2 | H&S Evolution | Iwata Smart Jet + Sparmax Tank

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.