SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Painting underside WWII aircraft

780 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Monday, December 16, 2013 10:58 AM

Don't spray can. Use an airbrush if you have one.

 

 

  • Member since
    November 2013
Posted by Spitfire on Monday, December 16, 2013 8:59 AM

Thanks for posting those links.  I figured this has been addressed before but on a quick search I didn't find anything.  And yes, this is in contemplation of painting a Spit

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Monday, December 16, 2013 8:57 AM

As far as technique, I personally believe spraying is easier than a good brush coating.  Painting by hand without leaving brush marks is a real art.  A number of folks can do okay with flats.  Hand brushing a good gloss finish without brush marks is an even harder art.  Few can do it.

Don Stauffer in Minnesota

  • Member since
    April 2006
  • From: ON, Canada
Posted by jgeratic on Monday, December 16, 2013 1:07 AM

Yup, what  Phil said and linked.  You will find every aircraft forum will have had at least one discussion thread on sky undersides during the summer of 1940.

As for white, I know the RAF coastal command authorized it's use for undersides, and quite possibly aircraft on convoy duty in the Atlantic, at least those that were lend leased from the States.   At the start of the war, fighters were give a half white (starboard side) and half black undersides.  This was ended in early June 1940, with the above mentioned sky colour.

regards,

Jack

p.s. - almost forgot the spraying inquery - well many prefer airbrush or spray cans because there is no issue of brush marks.  The thinner layer of paint also helps keep the finer details clear.   The airbrush also lends better to certain weathering and finishing techniques.

  • Member since
    August 2005
  • From: Sydney, Australia
Posted by Phil_H on Sunday, December 15, 2013 11:16 PM

There has been much debate on the topic of RAF underside colours.

Here's a couple of discussions which you may find interesting (or alternatively, may give you more headaches)

http://cs.finescale.com/fsm/modeling_subjects/f/2/t/151730.aspx?sort=ASC&pi240=1

http://cs.finescale.com/fsm/tools_techniques_and_reference_materials/f/28/p/155875/1694397.aspx#1694397

 

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Sunday, December 15, 2013 9:29 PM

Well, assuming you are talking about Spits or Hurricanes, you've stumbled on one of the more common paint color debates.  The forum expert on this is Antoni but it's my experience that the term "sky blue" in MM enamel is RAF Sky "Type S", and it has almost a greenish tint to it and yes, most definitely spray it.

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    November 2013
Painting underside WWII aircraft
Posted by Spitfire on Sunday, December 15, 2013 7:26 PM

I've recently undertaken a few of these and the instructions paint guide often will call for sky blue on the underside, but I've seen quite a few of these done plus many pictures and can't ever say that I've seen a sky blue underside. They all seem a dull/flat white to me.  Is that accurate?

Also, as a technique matter, since the underside is all one color, is it best to get spray paint for that?

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.