SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Tamiya weathering kits

2682 views
15 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2014
Posted by Offduty on Saturday, January 18, 2014 10:47 AM

I bought the A kit at HL and just ordered B,C and D from Amazon for 31.00. Should have a good quantity of colors to work with now. Good idea on buying eyeliner brushes for application just have to figure out how to tell the wife I need her to pick up some for me:)

  • Member since
    December 2011
Posted by Chrisk-k on Friday, January 17, 2014 10:54 PM

I have AK, MIG and Vallejo pigments, but I prefer Tamiya stuff.

Iwata HP-CS | Iwata HP-CR | Iwata HP-M2 | H&S Evolution | Iwata Smart Jet + Sparmax Tank

  • Member since
    June 2013
Posted by RobGroot4 on Friday, January 17, 2014 6:42 PM

I put future over them with no problem.  My one big complaint is that they can solidify/dry out a bit.  They are almost like a very dry grease paint for the model that you drybrush.  Some colors are soft and transfer well, others are hard and you have to really get into them, so practice with them.  Also, unless you want the colors mixed, get some eyeshadow brushes at your local target/walmart/etc. in the cosmetics aisle.

I read somewhere online that if you make a mistake you can clean them up with water and start over, but haven't tried myself.

Groot

"Firing flares while dumping fuel may ruin your day" SH-60B NATOPS

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, January 16, 2014 11:58 PM

Yes. They are more durable to handling than pigments though.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    January 2014
Posted by Offduty on Thursday, January 16, 2014 9:52 PM

Ok so from what you are saying apply weathering after the final coat of clear so the effect is not covered. I would guess not to handle it much and be carefull not to smear the finish with your fingers since there is no protection over it.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, January 16, 2014 1:49 PM

I always use them as the final stage of weathering, after the final matt coat. I have sprayed matt coats over Mig pigments, and that reduced the effect that they give by a large degree. Something I would highly recommend that you avoid.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    August 2009
  • From: Bluegrass
Posted by robiwon on Thursday, January 16, 2014 12:58 PM

Just like any other weathering powder, seal them afterword's.

  • Member since
    January 2014
Posted by Offduty on Thursday, January 16, 2014 11:31 AM

I just picked up a kit from H L to see how it performs. my location has 3 different kits so I will have to go elsewhere to purchase the others. Does anyone know if you should spray clear over it as a finial step, thanks for the responses!

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, January 16, 2014 11:04 AM

Well, one compac will last you a long time. I have had my sets for something like 4 years now. Granted, I only finish around  12-16 models a year since then, and do not use mych of the stuff on any single given project.... Now if I was building at a pace like Fermis or Duke Maddog here...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    February 2007
Posted by mitsdude on Thursday, January 16, 2014 2:16 AM

These don't seem to be selling at my HL. Either that or they frequently restock.

  • Member since
    May 2012
  • From: Pennsylvania
Posted by pilotjohn on Wednesday, January 15, 2014 7:23 PM

I use the rust and like it a lot.  I also use the gun metal as it makes it easy to put on small MGs after everything is done.  I have not used all the others, but am planning on trying them.

As said, Hobby Lobby has them in stock.

John

  • Member since
    August 2012
Posted by JimNTENN on Wednesday, January 15, 2014 6:38 PM

I have kits A thru D and I really like them. I haven't used all the colors yet but the thing I like about them is they allow you to concentrate a small amount of weathering pigment in one spot without it getting all over the place.

Current project(s): Hobby Boss: 1/72 F9F-2 Panther

                                  Midwest Products: Skiff(wood model)

                                  

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Wednesday, January 15, 2014 12:44 PM

i have used them and like them. i have the rust black pack and the dirt dust pack.  some seem to adhere better than others. be careful with the rusts. a really little bit goes a long way and the "stain" really sets. it is very easy to overdo it or have a dot or 2 come off the brush and land in an area you don't want and stain there. i have started using pastels and mixing my own shades like yellow, medium gray, and a touch of red brown to get the dust shade i want.

a friend demoed non glitter eye shadow (from THE DOLLAR STORE) to get the color burnish look on motorcycle exhausts.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Wednesday, January 15, 2014 11:04 AM

I have a couple of the kits and use them often. They are great! I especially use the "mud" & "sand" tones fro one set, and the "soot" from another. I have not bought and used the metallic set yet.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    February 2007
Posted by mitsdude on Wednesday, January 15, 2014 9:53 AM

These items look much like what one would find in a women's makeup kit! Big Smile

Looks like a compressed powder.

Not a replacement for powders just different.

You can find them at Hobby Lobby if you wanted to just buy one and test it out.

I've seen listings for these Tamiya kits up to "H".

 

  • Member since
    January 2014
Tamiya weathering kits
Posted by Offduty on Wednesday, January 15, 2014 9:31 AM

What's some experiences with the Tamiya weathering kits? I see they have an A to D kit with different shades. Would like to hear from you if you have used this product. Just about ready to purchase these from Amazon, thanks

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.