SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Tiniest Paint Brushes

3128 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Tiniest Paint Brushes
Posted by Anonymous on Wednesday, March 3, 2004 8:56 PM
Wondering what everyone uses for the tiniest details in cockpits and dashes....not drybrushing or toothpicks, but the finest brushes you use for knobs and such.
  • Member since
    November 2005
Posted by Anonymous on Wednesday, March 3, 2004 9:13 PM
Most of the brushes I use are non-rated as they are designed for Calligraphy.
As long as the brush has a good point I find that the size/rating does not matter that much.
  • Member since
    May 2003
  • From: The flat lands of the Southeast
Posted by styrene on Thursday, March 4, 2004 6:53 AM
10/0 round sable, or a fine sable liner works well for me.


Gip Winecoff

1882: "God is dead"--F. Nietzsche

1900: "Nietzsche is dead"--God

  • Member since
    July 2003
  • From: Toronto, Ontario, Canada
Posted by zokissima on Thursday, March 4, 2004 2:20 PM
Actually I've been wondering the same thing myself. So far I have a set of grumbacher brushes (very basic, not very small) sables that I use for enamels, and a set of detail brushes that were meant for Warhammer. they're a good quality sable, and meant for small details, and I've found them perfect. These I only use acrylics with.
Can anyone suggest any good brands of brushes and numbers?
  • Member since
    November 2005
Posted by Anonymous on Thursday, March 4, 2004 2:38 PM
The smallest one in my arsenal is an 18/0 Loew-Cornell Spotter.
  • Member since
    February 2003
  • From: A Spartan in the Wolverine State
Posted by rjkplasticmod on Thursday, March 4, 2004 6:38 PM
In my experience the 10/0 is about as small as you need for detail work. The point on the brush is much more important than the size. Ultra small brushes won't hold much paint and for me at least are hard to use with acrylics. The Winsor-Newton brushes are the highest quality that I have found that are suitable for detail painting on models or for figure painting. But a high quality sable brush isn't inexpensive.
RICK At My Age, I've Seen It All, Done It All, But I Don't Remember It All...
  • Member since
    January 2004
  • From: USA
Posted by MusicCity on Friday, March 5, 2004 5:11 AM
My smallest is a 20/0 spotter, but as Rick pointed out it's the tip that is important. Spotter brushes (or spot touchup brushes) come to a very fine point as opposed to being flat or round.

On a side note, since I know nothing at all about art, does anyone know what that "20/0" designation actually means? I have a "0000" brush that is actually smaller than my 20/0 except at the point, so presumably it has something to do with the point size.
Scott Craig -- Nashville, TN -- My Website -- My Models Page
  • Member since
    February 2004
  • From: Canada
Posted by RichardI on Saturday, March 6, 2004 11:24 AM
I've got a 10/0 but since I bought a Winsor and Newton Kolinsky sable 3/0 I haven't used it. The 3/0 is all I need. The quality red sable makes a big difference.
Rich Cool [8D]

On the bench: 1/48 Revell PBY Catalina 0A-10A. Next up: Moebius 1/24 Chariot from Lost in Space.

  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Saturday, March 6, 2004 12:19 PM
The smallest I have is a Pactra Dover pure red sable that is 15/0, but I rarely use it as it is too small. I use a Floquil 3/0 red sable most of the time.

Mike

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.