SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Need a dedicated A/B compressor ... Paasche D3000R ?

811 views
3 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2006
  • From: Boston
Need a dedicated A/B compressor ... Paasche D3000R ?
Posted by Wilbur Wright on Tuesday, May 17, 2016 8:09 PM

Hi Guys,

 I've been looking at the Paasche D3000R (20-30psi with regulator/filter and tank and auto shut off) and also their D500SR (20-25psi  regulator and filter no tank)-I guess this model only runs when the trigger is pressed??

Questions: Is 1/8 horse power enough?  Are those psi's enough for one brush for a half hour of spray work? Do I need the tank?  If no tank will paint "stuttering" or pulsing really be a problem?

Are all "USA made" compressors now really made in China?

I'd prefer to buy a name brand from a reputable place like Chicago Airbrush Co.  Badger has exceptional customer service. Is this also true for Paashe?

In general I believe in investing in good tools.

Thanks for the input.  I hope Don Wheeler sees this post.

  • Member since
    March 2013
Posted by patrick206 on Wednesday, May 18, 2016 12:50 AM

Hey Wilbur -

My current compressor is a California Air Tools 1610A, twin cylinder piston type, good size tank, regulator, etc. Just needed to install water trap. Super quiet and efficient, wish I had bought it long ago. $180 at Home Depot, delivered to your home. I have seen them as low as $150 at other stores. Best I've ever owned, long spray sessions last without running for 10-15 minutes, fast refill of about one minute.

May be overkill for you, at my hobby shop I just saw a Paasche, can't recall the model. Small and very quiet, no tank, but an easy remedy, puts out up to 50psi. It would not be heard in another room. I was impressed positively. Heat is the enemy of compressors, I don't know how long it would allow spray times between compressor running.

My 1610A runs so cool the cylinders don't get much more than room temp, very comfortable to the touch. The small airbrush brands are going to be around 75 to 100 bucks I think, the Paasche I mentioned had a price of $115, by the time you buy a tank and connecting hardware, I imagine you'd be about the same as the 1610A and it is clearly a much better performer.

You might take a look and see what you think, several of us here at FSM bought them.

Good luck with your search.

Patrick 

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Wednesday, May 18, 2016 8:57 AM

If you have a general purpose compressor, but it is too noisy to use in shop, an air tank may be a good option.  You can fill the tank in a garage, or outside.  Put gauges and regulator on it.  If the regulator you buy for it has an output gauge, that is actually enough- use the regulator and gauge on the GP compressor for filling.  Fill it to a pretty good pressure- 100 psi or so (but not at or near tank limit).  Should work for several sessions of airbrushing. 

Tanks are much cheaper than quiet airbrush compressors, and even quieter.

Don Stauffer in Minnesota

  • Member since
    February 2006
  • From: Boston
Posted by Wilbur Wright on Wednesday, May 18, 2016 5:45 PM

Patrick that unit is too much like what I have except for the lower dbl levels.

Don, That is really a pretty good idea, however I think I want to try a smaller one. I'm in Boston where it gets freezing and I may be running in and out of the cold garage etc.

Thanks for the input though.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.