Thinning Model Master clear coats

Do you have MM Clear Top Coat 2736? If so its clear enamel.

[quote user="mississippivol"]Probably not, but regular lacquer thinner should. Test for compatibility, though.

[/quote  By regular laquer thinner, I assume it's what I can get at a hardware store?

plasticjunkie

Do you have MM Clear Top Coat 2736? If so its clear enamel.

 

[quote user="Mars"]

[quote user="mississippivol"]Probably not, but regular lacquer thinner should. Test for compatibility, though.

[/quote  By regular laquer thinner, I assume it's what I can get at a hardware store?

[/quote]

Yes, sir.

Then use LT from Home Depot. That's what I use.

Thanks for the info

I also use MM clear flat....thinned about 50/50 with store brand lacquer thinner.

Istead of stending the money on their gloss...I bought a quart of Minwax clear gloss lacquer (again, thinned 50/50). The whole quart cost about the same as 2 MM bottles...I've done around 200 builds and have just passed the 1/2 way mark on that quart! 

I just got done dullcoating a plane with the Testors dullcoat lacquer in bottle. I used lacquer thinner at 1:1, the same ratio I use with Testors enamel and enamel thinner.  Worked fine.