SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

How to thin Vallejo/Model Color paints to create a wash

8310 views
2 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Friday, March 8, 2019 4:34 PM

Yeah, water, as German Armor said.  I use water to make washes with Vallejo colors, also with Andrea, and with craft store acrylics.

I don't use retarders, myself, I haven't found it necessary.  But your mileage may vary, as they say.

For my gloss toy soldiers, I do use water, acrylic colors, and Future, to make thin glazes that are similar to washes.  The purpose is the same-to put down a layer of very thin color, which settles in relief areas and provides a contrast to surrounding colors.

Best regards,

Brad

The bigger the government, the smaller the citizen.

 

 

  • Member since
    February 2016
  • From: Ice coated north 40 saskatchewan
Posted by German Armour on Friday, March 8, 2019 11:19 AM

Hi, in reguards to your question, I have the same book :) you can thin down the vallejo paints with water/flow retarder mix till it's thin. It goes on real nice.

https://www.reddit.com/r/minipainting/comments/6cmzj8/what_do_you_use_to_thin_down_vallejo_paints_for/

http://cs.finescale.com/fsm/tools_techniques_and_reference_materials/f/23/t/174972.aspx

http://www.coolminiornot.com/forums/showthread.php?16499

http://cs.finescale.com/fsm/tools_techniques_and_reference_materials/f/18/t/160754.aspx

https://www.britmodeller.com/forums/index.php?/topic/234990930-spraying-vallejo-loads-of-problems-help-appreciated/

http://ipms-seattle.org/modeltalk/2015/10/20/airbrushing-vallejo-acrylics/

http://cs.trains.com/mrr/f/11/t/258752.aspxhttps://bg.battletech.com/forums/index.php?topic=5507.0

http://www.maschinenkrueger.com/joomla/index.php?option=com_content&view=article&id=23:vallejo-model-paints&catid=18:tools-and-supplies&Itemid=22

http://cs.finescale.com/fsm/tools_techniques_and_reference_materials/f/13/t/155355.aspx

https://www.reddit.com/r/Warmachine/comments/6ycbtj/making_your_own_wash_vallejo/

http://www.sunwardhobbies.ca/paints/vallejo-model-wash-tips.pdf

https://www.britmodeller.com/forums/index.php?/topic/234939204-doing-a-wash-the-correct-way/

https://community.warcradle.com/topic/16605-turning-paint-into-a-wash/

https://www.themodellingnews.com/2013/06/review-using-vallejo-washes-to-add-more.html

https://www.dakkadakka.com/dakkaforum/posts/list/490087.page

https://www.scalemodellingnow.com/hntools-vallejo-acrylic-washes

 Never give up, never quit, never stop modelling.Idea

 

  • Member since
    May 2016
How to thin Vallejo/Model Color paints to create a wash
Posted by Hobbie on Friday, March 8, 2019 6:16 AM

Question for the Vallejo/Model Color user ; what do you use to thin those colors and make a wash?

I know about the ready-to-use Vallejo washes but they are not what I need ; I recently purchased Calvin Tan's Osprey book "modelling waffen ss figures", and his techniques require using washes during the process with different tones or mixes. So, the ready-to-use are not an option, and neither are the classic oils.

I'm only used to oil washes, with lighter fluid ; how should I thin the Vallejos without destroying the base coats when applying? Just water? Still lighter fluid?

Arguing with an engineer is like wrestling with a pig in the mud : after a while, you realize the pig likes it.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.