SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Ultrasonic Cleaners

769 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2004
  • From: Salt Lake City, Utah
Posted by uilleann on Thursday, May 6, 2004 12:07 AM
We used them on everything from eyeglasses to jewelry to surgical impliments (before the went in the autoclave!) They'd work great - until they broke. Usually no warning either. Yeah, you'll find cheap stuff on ebay all the time - it's a dime a dozen to coin a phrase. You *might* get lucky and get a hold of one that lasts for a few weeks or months....and you might get one that stops dead after two 30 second cycles. I've seen both ends of the spectrum.

The thing is, an ultrasonic is good for SO many cleaning tasks. Metal watch bands are a cinch, musical instrument mouthpieces like trumpets etc., paintbrushes, all sorts of stuff. So it'd be a great investment for the household. Make sure the wife/girlfriend/both know about it's jewelry cleaning capabilities too - they might even offer to buy it for you then!
"I may not fly with the eagles.....but weasels don't get sucked into jet engines!"
  • Member since
    January 2004
  • From: USA
Posted by MusicCity on Wednesday, May 5, 2004 10:14 PM
QUOTE: Branson has a small unit for around $300, but I'm not sure at this point that I can justify such an expense (I'd rather spend the money on some new airbrushes!). Still, I have heard that a good unit reconditions old airbrushes to like-new quality, and getting that kind of life out of a tool might be worth the expense.

They probably do a great job. I know for a fact ultrasonic cleaners will break dried drafting ink loose Smile [:)] Problem is that $300 will by several good airbrushes.
Scott Craig -- Nashville, TN -- My Website -- My Models Page
  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Wednesday, May 5, 2004 9:07 PM
Doc,

I am no expert on ultrasonic cleaners so I couldn't comment.
I have never owned one or used one and my airbrushes work just fine. Wink [;)]

Mike

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    March 2003
  • From: USA
Posted by DocTG on Wednesday, May 5, 2004 8:47 PM
Mike,

I ran across the very machine you mentioned was on ebay. Brand new it runs $49, but I suspect uilleann is right about getting what you pay for. Branson has a small unit for around $300, but I'm not sure at this point that I can justify such an expense (I'd rather spend the money on some new airbrushes!). Still, I have heard that a good unit reconditions old airbrushes to like-new quality, and getting that kind of life out of a tool might be worth the expense.

Doc
Doc
  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Wednesday, May 5, 2004 8:37 PM
Look at the ones on Ebay all the time for sale for cleaning jewelry and dentures.
From what I hear they are basically the same thing as the more expensive ones and I have seen them sell for $30-35 on Ebay.
Here's one for $13!
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=31387&item=4109793702&rd=1

Just type "Ultrasonic" in the search and you will find many.

Mike

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    March 2004
  • From: Salt Lake City, Utah
Posted by uilleann on Wednesday, May 5, 2004 8:23 PM
We also use them extensively in ophthalmology. But cheap they aren't. They tend to start around $250 and go up pretty quick if I remember correctly. And - much like compressors - you'll get what you pay for.
"I may not fly with the eagles.....but weasels don't get sucked into jet engines!"
  • Member since
    January 2004
  • From: USA
Posted by MusicCity on Wednesday, May 5, 2004 8:14 PM
Check in drafting supplies areas. They are used in engineering offices to clean technical drawing pens.

They should work OK, but just blowing a bit of thinner through works pretty well.
Scott Craig -- Nashville, TN -- My Website -- My Models Page
  • Member since
    March 2003
  • From: USA
Ultrasonic Cleaners
Posted by DocTG on Wednesday, May 5, 2004 7:57 PM
I'm thinking of shopping around for a good, affordable ultrasonic cleaner for my airbrushes. Any info, leads, or advice on such a purchase would be greatly appreciated.

Doc
Doc
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.