SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

CALLING MIKE V HEEEEEEEELP

1100 views
15 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2004
  • From: UK er the 3rd world
Posted by seanrgb4 on Thursday, July 1, 2004 11:18 AM
Cheers guys lots of info for me there
  • Member since
    November 2005
Posted by Anonymous on Wednesday, June 30, 2004 12:26 AM
seeing the workr sean does, i think the best airbrush is an iwata cs, a cr, or an omni 4000
  • Member since
    July 2003
  • From: Lower Alabama
Posted by saltydog on Tuesday, June 29, 2004 9:49 PM
QUOTE: Salty...IWATA!!


jeff, it seems that your cold is getting better friend!
Clown [:o)]Big Smile [:D] i'm happy for you. later.
Chris The Origins of Murphy's Law: "In the begginning there was nothing, and it exploded."!!! _________ chris
  • Member since
    January 2004
  • From: USA
Posted by MusicCity on Tuesday, June 29, 2004 9:44 PM
Tamiya would be a good choice as well since I understand they are made by Iwata.
Scott Craig -- Nashville, TN -- My Website -- My Models Page
  • Member since
    November 2005
Posted by Anonymous on Tuesday, June 29, 2004 9:05 PM
Not that I've joined 1337, but don't buy an Aztek.... I've been pretty happy with my Badger 200NH & my next airbrush will most likely be a Badger. Here is a link for some good prices on Badger & Omni/Vegas.

http://www.youcanshopsecure.com/baairbrprli.html

and if you're into Tamiya airbrushes, here's a good site...

http://www.buy-model.com/itemlist.php?ItemClassId=V&GroupId=119
  • Member since
    January 2004
  • From: USA
Posted by MusicCity on Tuesday, June 29, 2004 7:35 PM
QUOTE: Originally posted by woodbeck3

Wink [;)] Salty...IWATA!!

You didn't finish the sentence ... Iwanta BADGER!
Scott Craig -- Nashville, TN -- My Website -- My Models Page
  • Member since
    November 2005
Posted by Anonymous on Tuesday, June 29, 2004 5:36 PM
Wink [;)] Salty...IWATA!!
  • Member since
    January 2004
  • From: USA
Posted by MusicCity on Tuesday, June 29, 2004 1:54 PM
QUOTE: Originally posted by saltydog

jeff, do you have a cold my friend?Wink [;)] you might want to get that cough checked out!! i noticed you were barking the same awful cough in another thread close by!!Tongue [:P]Big Smile [:D]

Good one, Chris Tongue [:P]
Scott Craig -- Nashville, TN -- My Website -- My Models Page
  • Member since
    November 2005
Posted by Anonymous on Tuesday, June 29, 2004 1:11 PM
Badger 100 LG its the same just a big cup. I've got its a nice one. And cheap.
  • Member since
    July 2003
  • From: Lower Alabama
Posted by saltydog on Monday, June 28, 2004 11:35 PM
jeff, do you have a cold my friend?Wink [;)] you might want to get that cough checked out!! i noticed you were barking the same awful cough in another thread close by!!Tongue [:P]Big Smile [:D]
Chris The Origins of Murphy's Law: "In the begginning there was nothing, and it exploded."!!! _________ chris
  • Member since
    November 2005
Posted by Anonymous on Monday, June 28, 2004 11:23 PM
Badger!
  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Monday, June 28, 2004 9:32 PM
QUOTE: Originally posted by seanrgb

hi mike thinking of getting a airbrush, which would you recomend ?


All of them. Laugh [(-D]
That all depends on what you want and how much you want to spend.
I think MusicCity gave some good advice.

Mike

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    January 2004
  • From: USA
Posted by MusicCity on Monday, June 28, 2004 9:04 PM
I'm not Mike, but I am personally completely happy with my Omnis. I've had a 3000 (siphon feed) for a good while and just recently got a 4000 (gravity feed). An Iwata would also be an excellent choice. Based on what I have seen here I would stay away from Azteks though. While a few people have had good results with them, it appears that most don't.
Scott Craig -- Nashville, TN -- My Website -- My Models Page
  • Member since
    November 2005
Posted by Anonymous on Monday, June 28, 2004 12:04 PM
how much you want to spend, sean?

some good airbrushes:
badger 100
badger 150
badger 155
badger 175
(not the 360, i assume you would use it for your 1/32 phantom, cups too small but you can use jars)

omni 4000

iwata revolution cr
iwata hp-cs
iwata hp-c

peak c5

most are under 100$$$ from either coastairbrush or dixieart or bearair
  • Member since
    November 2003
  • From: Stockton CA USA
Posted by roosterfish on Monday, June 28, 2004 11:23 AM
I'm not sure but I think he would recommend a Badger? He'll be here shortly. Until he gets here you might want to try to look through the pages of Iwata airbrushes. As a start I would look at the HP-CR brochure.

Oh, gotta go...here he comes now.
Winners never quit; quitters never win.
  • Member since
    May 2004
  • From: UK er the 3rd world
CALLING MIKE V HEEEEEEEELP
Posted by seanrgb4 on Monday, June 28, 2004 10:46 AM
hi mike thinking of getting a airbrush, which would you recomend ?
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.