Christmas in July!

MikeV

Member since
April 2003
From: Hayward, CA

Posted by MikeV on Saturday, July 24, 2004 5:11 PM

QUOTE: Originally posted by shrikes

Thanks, fellas!
Now the question: I just want to ask if a good regulator and moisture trap will solve these problems?

No. The only way to stop the pulsation of a diaphragm compressor is to install some sort of air tank to even out the airflow. You could convert a small fire extinguisher bottle for this use or get a small airtank of some sort.

Mike

“Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon

Reply

J-Hulk

Member since
February 2003
From: Tochigi, Japan

Posted by J-Hulk on Saturday, July 24, 2004 1:37 PM

Happy shooting!

~Brian

Reply

shrikes

Member since
November 2003
From: Manila, Philippines

Posted by shrikes on Saturday, July 24, 2004 1:08 PM

Thanks, fellas! Big Smile [:D]

I went and tried out my airbrush today at my IPMS Group Build using their hose and compressor, and it works beautifully! I can't belive i didn't invest in one sooner! Tongue [:P]

What i need to worry about next is a compressor. The most common compressors here are the small diagphragm compressors, and i'm told that the air pulses along with the diagphragm, and there's no way to control the pressure without a regulator... Now the question: I just want to ask if a good regulator and moisture trap will solve these problems?

Blackadder: This plan's as cunning as a fox that used to be Professor of cunning at Oxford University but has now moved on and is working with the U.N at the high commission of cunning planning

Reply

rjkplasticmod

Member since
February 2003
From: A Spartan in the Wolverine State

Posted by rjkplasticmod on Friday, July 23, 2004 9:25 AM

Cogratulations on your first AB. I don't know much about this model but it looks like a good one. Enjoy learning to use it & adding a new dimension to your modeling skills.

Regards, Rick

RICK

At My Age, I've Seen It All, Done It All, But I Don't Remember It All...

Reply

saltydog

Member since
July 2003
From: Lower Alabama

Posted by saltydog on Friday, July 23, 2004 9:18 AM

i'm proud for you shrikes!!! now, we can't wait to see those stellar paint jobs that your gonna be able to achieve with that airbrush friend, so get busy!! later.

Chris

The Origins of Murphy's Law: "In the begginning there was nothing, and it exploded."!!! _________ chris

Reply

MusicCity

Member since
January 2004
From: USA

Posted by MusicCity on Friday, July 23, 2004 7:18 AM

You'll enjoy it. I don't have a 175 but I have 3 other Badger brushes and have been completely happy with them.

One word of advice ... Find another piece of plastic tubing the same size as the one in your bottle, but a little bit longer. Heat it up with a hair dryer or heat gun and bend it slightly so that it aims right at the bottom corner of the bottle. Trim it so that the bottom of the tube is just barely off the bottom of the bottle. The way it is not you will have to have a good bit of paint in the bottle for the tube to pick it up. With a longer tube aimed at the corner of the bottle you can slurp virtually every drop of paint out of the bottle.

Enjoy it!

Scott Craig -- Nashville, TN -- My Website -- My Models Page

Reply

MikeV

Member since
April 2003
From: Hayward, CA

Posted by MikeV on Friday, July 23, 2004 7:16 AM

Congratulations Shrike. Wink [;)]

You should be able to paint most anything you want with that Crescendo my friend. I have never used that particular model but I am familiar with them from others who use them.
I would use the metal color cup myself as it uses much less paint and is easier to clean. The jars are for jobs needing more paint such as T-shirt airbrushing, which that airbrush was designed for.

Mike

“Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon

Reply

shrikes

Member since
November 2003
From: Manila, Philippines

Christmas in July!

Posted by shrikes on Friday, July 23, 2004 5:05 AM

My parents finally decided that they've had enough of my nagging, and to shut me up and got me one of these:

I'm so Happy.... Smile,Wink, & Grin [swg]

Hehehe....

I got a good price on this too (concidering i didn't have to pay for shipping): Php4540.00. That's roughly $82 USD. Trouble is, there is no hose... so i need to find this next - and a compressor (but I'll do this when i have money of my own! Either that or nag them to get me one! Laugh [(-D]

but that could take years...) For now, I'm going to be using a compressor and hose that was "donated" to my IPMS by one of the members...

MikeV: Anything i sould know about this particular airbrush, O-Wise-one? Hey, I did warn you a couple of months back! Tongue [:P]

Blackadder: This plan's as cunning as a fox that used to be Professor of cunning at Oxford University but has now moved on and is working with the U.N at the high commission of cunning planning

Reply

THE MAGAZINE

CONTACT US

RECENT ARTICLES

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT VIDEOS

POPULAR TOPICS

RECENT THREADS

CATEGORIES

NEW PRODUCTS

OUR STORE

CURRENT ISSUE

SEARCH FINESCALE.COM