what do u guys think of this AB?

If ya want a good brush bro look at the Thayor & Chandler Omni 4000G Gravity feed DA brush. Its really really good, affordable and a Badger so parts are easy to come by. It shoots all the line widths you could ever want for modelling, no matter what you model. Easy to clean and tough, take down in 2 minutes, completely.
Thats my suggestion to you.
www.bearair.com www.dixieart.com
You'll find it here and maybe talk to mike for another option that will save you more.
-Jeff

the 175 has a fat handle compared to the 150

hehehe I like my PAASCHE VLS Double Action, its a pretty common brush and is practically Kiddie Proof.... But thats just my own opinion..

thanks alot man...
actually tho, im thinkin of not getting that one and getting either a badger 150 or 175 cresendo from the states for a little more....
the extra cash wont kill me....and its prob a whole heap better
btw... which would be better? the 150 or 175? im thinkin the 175 coz its a higher number ;)

It's a Sumake, I know nothing about it.. I was looking through their website though and they have a lot of knock off's of a lot of different things, they have a Silentaire Scorpion 1 Air compressor, knock off also...

If you need the contact information for this company in case you need parts later on...

Sumake Industrial Co Ltd
3F-2, No. 202
Nan-King East Road, Section 5
Sung Shan District
Taipei
Taiwan 105
Tel: (886 2) 87876002
Fax: (886 2) 27653706
Email Address(es):

sales@sumake.com.tw
Homepage: http://www.globalsources.com/sumake.co
Other Homepage Address: http://www.sumake.com

Or.....

Key Contact:
Mr Su, Mike
Managing Director
sales@sumake.com.tw

Mr


1st Branch Office Address
Sumake USA Inc
3002 Dow Avenue
Suite 524 Tustin
California
United States 92780
Tel: (1 714) 8383678 / (1 714) 8383598
Fax: (1 714) 8380918
Key Contact:
Mr Lin, Sammy
Program Manager
sammy_l@sumakeusa.com

It may not be bad for a first airbrush, you'll just have to try it and see. If it works out, that's great, if not, you didn't lose a lot. I'm not familiar with the brand, but I doubt that Badger parts would fit it. I suspect that when you need parts you are going to have to get them from the manufacturer. Don't worry about that until it happens though since that time might be a good while down the road.

yea i know....
but i thoiugh it couldnt be to bad for my first AB... it only cost me 60aud.....
so if i need parts i should try badger parts?

thanks

bubba, you ask that question before you purchase the brush!!! now, you tell us what YOU think about that brush as soon as you get it set up. later.

you should be ok for a little while, until you need parts. then that might be a problem.

b

It's a Badger 150 knock off, if you ever need parts you are going to be out of luck. If your lucky the Badger parts may fit but probally not. Good luck with it I hope it works okay for you.
John

..wish i could help ya
i DO know that there should be a flock of posters who will give you the best head's up about ABs, including yours.....
best of luck to ya......