To all that assisted me with information on paint to thinner ratio

QUOTE: Originally posted by MusicCity I spray Tamiya flat, gloss, and Smoke all reduced at 3:1 at around 10-15 psi. The Smoke looks thick but it sprays pretty well. cool thanks! I'll try it on the left over canopy pieces from the Ju88 I just built... I was a bit apprehensive about it and was thinking of hand brushing it.. still might, it is only 2 separate 1/2 inch canopy sections on the very top of the canopy I am tinting, so the future/color dip is out... and I can mask it, but who knows.. might try the handbrush way this time... but curious all the same so will play with it on scrap canopy... ---Tom--- O' brave new world, That has such people in it! Reply Anonymous Member since November 2005 Posted by Anonymous on Thursday, September 2, 2004 8:57 PM Glad its workin bro. The reason I asked you what ab is because dif needles and such. I started back with models with an aztek (testors) and even though you found a good thin ratio, you can even thin more using a aztek and youmight be better off. The Aztek doesnt have the best airflow through it so dont be scared to thin more. Reply Edit MusicCity Member since January 2004 From: USA Posted by MusicCity on Thursday, September 2, 2004 8:45 PM MMM, glad it worked out for you. The first time is always the hardest, especially when it's spraying something that you've already worked pretty hard on. Welcome to the airbrush club, it gets easier from here on QUOTE: yeah, especially those gloss colors... gonna have a try at the clear smoke this weekend on my Dolphin HH65 I am building... it looks REAL thick and I haven't even opened it to stir yet! I spray Tamiya flat, gloss, and Smoke all reduced at 3:1 at around 10-15 psi. The Smoke looks thick but it sprays pretty well. Scott Craig -- Nashville, TN -- My Website -- My Models Page Reply tho9900 Member since July 2004 From: SETX. USA Posted by tho9900 on Thursday, September 2, 2004 7:43 PM yeah, especially those gloss colors... gonna have a try at the clear smoke this weekend on my Dolphin HH65 I am building... it looks REAL thick and I haven't even opened it to stir yet! ---Tom--- O' brave new world, That has such people in it! Reply jdavidb Member since August 2004 From: Kennesaw, GA Posted by jdavidb on Thursday, September 2, 2004 7:38 PM Have you tested the gloss colors through the Crescendo too? They seem to be the thick ones. I guess what I'm trying to say is: don't feel weird if a Tamiya paint makes you feel like you have to keep adding more & more thinner to airbrush it. With Gunze, it seems like every time we airbrush it we use a different amount to thin it. We did flat white Gunze recently, and it had to be airbrushed right from the jar it was so thin. Reply tho9900 Member since July 2004 From: SETX. USA Posted by tho9900 on Thursday, September 2, 2004 7:25 PM actually not that much, like I said in the other thread it varies by type of paint but it doesn't take a lot of thinner in MOST cases to spray it... even through an Aztek! I sprayed some through my Crescendo and it flowed through with ease. Ocassionally the Aztek would sputter a bit if it was a bit too righ on the paint. ---Tom--- O' brave new world, That has such people in it! Reply jdavidb Member since August 2004 From: Kennesaw, GA Posted by jdavidb on Thursday, September 2, 2004 6:52 PM Tamiya acrylic was mentioned in the other thread. I'm not much into acrylic stuff unless it's my nephew doing the airbrushing. I have tested some Tamiya through an airbrush and read lots of people's comments about it in usenet. I'm sure it is supposed to be airbrushed with loads of thinner, such as 5 parts Tamiya thinner to 1 part paint. Reply Anonymous Member since November 2005 To all that assisted me with information on paint to thinner ratio Posted by Anonymous on Thursday, September 2, 2004 5:47 PM Well, I went for it earlier today armed with the mixing information you gave me and... Success!!! I am absolutely over the preverbial moon with joy. Thank you all who helped. The finish the airbrush gave to my Challenger 2 MBT is smooth and even. Thank you all again. PS, I will be back soon to ask about MIG pigments... You guys are the best. I honestly can't thank you enough. Reply Edit JOIN OUR COMMUNITY! Our community is FREE to join. To participate you must either login or register for an account. Login Register SEARCH FORUMS FREE NEWSLETTER SIGN UP By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy. FORUMS PRODUCT REVIEWS READER GALLERY HOW TO VIDEOS SHOP ABOUT US FREE MONTHLY NEWSLETTER SIGN UP By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy. More great sites from Kalmbach Media Terms Of Use | Privacy Policy | Copyright Policy