pressure regulators?

Anonymous

Member since
November 2005

Posted by Anonymous on Monday, October 4, 2004 7:25 PM

one that's not intended for airbrushing but is quiet and provides approx 25-30 psi

Reply
Edit

Anonymous

Member since
November 2005

Posted by Anonymous on Monday, October 4, 2004 12:05 AM

what kind of compressor do you have? Just asking cuz I have a Paasche one I bought a few weeks ago and it has a bleed valve on the hose connector. I think the comp puts out about 30-40 psi, which seems sort of strong for airbrushing, at least to me, but by adjusting the amount of bleed, you can pretty much get any result you like.

Reply
Edit

MusicCity

Member since
January 2004
From: USA

Posted by MusicCity on Sunday, October 3, 2004 9:58 PM

It's not really lost. Static pressure (the pressure when no air is flowing) is usually slightly higher than when air is flowing. It's just the way regulators work. It really means nothing since the only pressure you are concerned with is the pressure when the airbrush is actually in use (trigger down, paint flowing, air flowing). It's just that the gauge will read slightly higher when there is no air flowing.

Scott Craig -- Nashville, TN -- My Website -- My Models Page

Reply

Anonymous

Member since
November 2005

Posted by Anonymous on Sunday, October 3, 2004 9:34 PM

music city: so what ur saying is that some psi is lost when the air goes from the compressor to the hose?

Reply
Edit

MusicCity

Member since
January 2004
From: USA

Posted by MusicCity on Sunday, October 3, 2004 8:58 PM

Not that I'm aware of. You might see a slight shot of air that is a little above the normal flow pressure, but it usually isn't much higher. To get 15 psi when air is flowing I have to set my regulator to about 18 or so.

Scott Craig -- Nashville, TN -- My Website -- My Models Page

Reply

Anonymous

Member since
November 2005

Posted by Anonymous on Sunday, October 3, 2004 8:49 PM

Thanks.

I thought there was a kind of regulator that simply reduced the pressure AFTER your first blast of paint..

Reply
Edit

MusicCity

Member since
January 2004
From: USA

Posted by MusicCity on Sunday, October 3, 2004 8:36 PM

The first one should work fine.

The second link has a 1/2" NPT inlet. It would not work without an adapter.

The third link has an oiler on it for air tools that require an oil supply. You probably don't want oil blowing out your airbrush.

The fourth one looks like it has plastic threads. I'd stick with aluminum or brass threads.

Scott Craig -- Nashville, TN -- My Website -- My Models Page

Reply

Anonymous

Member since
November 2005

pressure regulators?

Posted by Anonymous on Sunday, October 3, 2004 8:07 PM

Hi again, just wondering if these pressure regulators are suitable for my compressor and my badger 155.

http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=90590

http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=1118

http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=42035

http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=44938

the reason i looked at harbor freight is because i don't feel it's worth it to spend $30+ for something that I can get for cheaper. if anyone has any more recommendations, remember to post them. Clown [:o)]

Reply
Edit

THE MAGAZINE

CONTACT US

RECENT ARTICLES

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT VIDEOS

POPULAR TOPICS

RECENT THREADS

CATEGORIES

NEW PRODUCTS

OUR STORE

CURRENT ISSUE

SEARCH FINESCALE.COM