SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Home-made spray booth and pressure source

507 views
2 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Home-made spray booth and pressure source
Posted by Anonymous on Friday, December 24, 2004 12:08 PM
I am usually in the ship area of the forum but came in here to check out tips on painting. I found that many of you are hoping to someday buy a spray booth, so I decided to share what I did a few years ago to solve that problem.

I had an old Radio Shack computer desk that measured 40" wide x 18" deep. I built a frame on it made of cheap 1x2 wood and built it up 24" tall from table top to top of frame. I covered the frame with 1/8th inch pressboard. I cut a hole in back, removed the back grill from a box fan and used those holes to mount it over the hole. On the inside back, I placed an a/c filter large enough to slightly overlap the hole. When the fan is turned on, it draws air into the box, thru the filter, and out the back. The materials, including the fan and filter, cost less than $30. I didn't buy a compressor. Instead, I bought an 11 gallon air tank, mounted a valve on it with 2 pressure gauges. This setup cost me less than $40. I had my system for less $70 and avoided having to spend hundreds. The first gauge is mounted before the valve and tells you how much air remains in the tank. The second gauge mounts after the valve. With your airbrush open, simply turn on the air valve slowly until the second gauge shows the pressure you desire. Close the airbrush, attach your paint well, and paint away. I did over 20 models before I had to refill the tank., which was done easily with the air hoses at a truck stop, and only used 2 a/c filters, which are cheap, and never had a drop of paint make it thru to the fan blades.

I don't have the spray booth anymore but am going to build another one real soon. Wal-mart has a nice student desk for just $22. I'm going to buy that for my table and put casters on it in the event that I want to put it against an open window, which is not necessary. One thing though, if you build one, use the fan on high speed if placed in an open window and on medium speed if not. If you use it on high speed without being in front of an open window, use 2 a/c filters instead of one to eliminate the odors in the room. You will not believe how great this works and it can be built easily in less than a day.

Hope this helps all of you who want to move up to air brushing and who, like me, can't afford to spend $200 to $400 for a decent size booth.
  • Member since
    March 2003
  • From: Broken Arrow, Oklahoma
Posted by maddafinga on Friday, December 24, 2004 1:39 PM
Great tips man! Thanks.
Madda Trifles make perfection, but perfection is no trifle. -- Leonardo Da Vinci Tact is for those who lack the wit for sarcasm.--maddafinga
  • Member since
    February 2004
  • From: NW Connecticut
Posted by abutt2 on Friday, December 24, 2004 1:52 PM
I made my box out of a huge cardboard box something came in. Cut a large square area out of the top and taped translucent plastic over the hole to let ambient light in. I intend to cut a vent hole in the back but so far haven't needed it. I work small 1/35 tank stuff. have two small lazy susans covered with newsprint for the models. I can't believe what some of these guys are charging for spray booths. I DO use an Iwata compressor though, and love it.

BudSmile [:)]
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.