For Mike New Badger 350 problem

Anonymous

Member since
November 2005

For Mike New Badger 350 problem

Posted by Anonymous on Wednesday, March 2, 2005 10:31 PM

After five years my old bager went bad, so I dumpt it and Less than a mounth ago I went to Michaels and purchased a new Badger 350, and I went ahead and purchased the additional two Fine & Large Needle Assemblys. On December My wife got for me a new compressor. I also got me 1/4 compressor addaper and eliminated the big ring around hose that game with compressor also got a breaided hose and install a Inline watter trap that is working great also got a Jar paint filer and battery operated mixer. Already prime the plane that I am working on and am almost ready to go with the Future mention so many times on the forums. So today after applying the last color cote on the model, I tried to disconect the host from the airbrush and the Air Hose Fitting kept turning with the host connector. So would like to know if any of you modelers out there has encounter the same problem, Should I send it back to Badger since I have only had the airbrush for about three weeks.

Mike if you could give me insite I sure would be very greatful, since everybody on forum refers these type of question to

Thanks again, it is really great to be able to count an the forum community for help. Sad [:(]

Reply
Edit

MikeV

Member since
April 2003
From: Hayward, CA

Posted by MikeV on Wednesday, March 2, 2005 11:36 PM

I am not familiar with the Badger 350, sorry.
I would contact Badger and see what they tell you.
info@badgerairbrush.com
Phone (800)AIR-BRUSH or (800)247-2787

Mike

“Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon

Reply

Anonymous

Member since
November 2005

Posted by Anonymous on Thursday, March 3, 2005 11:21 PM

Hey edco
I have a badger 350 and mine has the same problem ! Don't worry about it though because it doesn't effect your painting ability and I have had mine for over 3yrs with this problem and it still produces some of my best finishes ever !

Reply
Edit

tho9900

Member since
July 2004
From: SETX. USA

Posted by tho9900 on Friday, March 4, 2005 6:08 AM

ahhh suddenly I remember the 350... that was my first brush many years ago in my past modelling life... you could email Badger and explain the problem and I am sure they will have a solution....

---Tom--- O' brave new world, That has such people in it!

Reply

Anonymous

Member since
November 2005

Posted by Anonymous on Friday, March 4, 2005 1:26 PM

Thank you all for your prompt sugestions, I really appreciate it, already fire out an E-mail to Badger. I am really considering purchasing a Badger 155.

Reply
Edit

Anonymous

Member since
November 2005

Posted by Anonymous on Friday, March 4, 2005 1:57 PM

Thats a good choice! What about badgers 100LG this is an excellent airbrush as well !

Reply
Edit

Anonymous

Member since
November 2005

Posted by Anonymous on Friday, March 4, 2005 11:23 PM

Thank to all of you again, I went ahead and sent two e-mails one info@bagerairbrush.com and another to Mr. Ken Badger, already got a response from both of them. Ken Badger is going to send me a new replacement and when I receive it then I can mail the damaged one so that I dont have to be without on airbrushl That surely made my day.

The info address said that if I would send the the aribrush the would fix the problem for free, by if I did not want to send the airbrush I could order the air host fitting for $2.30 at the following Web Address: www.webairbrushes.com.

So thanks to you all this one has a happy ending.

Thank, and Thanks. & Thanks & ..................... Big Smile [:D]

Reply
Edit

MusicCity

Member since
January 2004
From: USA

Posted by MusicCity on Saturday, March 5, 2005 7:11 AM

Badger's service is second to none in my opinion. They have always been there for me when I needed them.

Scott Craig -- Nashville, TN -- My Website -- My Models Page

Reply

MikeV

Member since
April 2003
From: Hayward, CA

Posted by MikeV on Saturday, March 5, 2005 11:36 AM

QUOTE: Originally posted by edco

Thank to all of you again, I went ahead and sent two e-mails one info@bagerairbrush.com and another to Mr. Ken Badger, already got a response from both of them. Ken Badger is going to send me a new replacement and when I receive it then I can mail the damaged one so that I dont have to be without on airbrushl That surely made my day.

That's great news edco.
By the way, Ken Badger is his email address name, not his real name.
His name is Ken Schlotfeldt. Wink [;)]

Mike

“Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon

Reply

Anonymous

Member since
November 2005

Posted by Anonymous on Saturday, March 5, 2005 1:54 PM

Thanks for the correction on Ken's Name, that is good to know.

Reply
Edit

tho9900

Member since
July 2004
From: SETX. USA

Posted by tho9900 on Saturday, March 5, 2005 3:07 PM

While that 350 is good for most things, keep that 155 in your mind for later if you ever decide to get another brush... it's a really good brush that is durable and easy to work with!

---Tom--- O' brave new world, That has such people in it!

Reply

THE MAGAZINE

CONTACT US

RECENT ARTICLES

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT VIDEOS

POPULAR TOPICS

RECENT THREADS

CATEGORIES

NEW PRODUCTS

OUR STORE

CURRENT ISSUE

SEARCH FINESCALE.COM