SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Iwata HP-CS and Alclad II

1216 views
11 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Posted by Anonymous on Tuesday, May 17, 2005 10:34 PM
I actually picked up my HP-C Plus for $160 Big Smile [:D] retail is in the $300 range Boohoo [BH]
they are spendy, but if you shop around you can find a good deal, email me and I can give you a good web site to check as well as a few ebay dealers to look at.
  • Member since
    July 2004
  • From: SETX. USA
Posted by tho9900 on Tuesday, May 17, 2005 8:59 PM
E -

I love the Anthem as well, and still will use it for some thing, and possibly the 175 Crescendo. But I need something to get more deatil for me and a gravity feed was on my wish list as well... so after weighing pros and cons I decided on the HP-CS... I've heard enough to convince me. The Alclad was the icing on the cake, I can do it nicely with the 155 and 175 but would prefer to stick to one main brush and use the others for big jobs as the needle/nozzle is bigger..

I havent got it yet but will be sure to tell you my opinion of it when I do!!!


---edit----

oh yeah to all of you who replied I appreciate it! I have felt like I was on deaths door this week with a sinus infection so wasnt posting much, just reading. (it actually hurt to type)
---Tom--- O' brave new world, That has such people in it!
  • Member since
    November 2005
Posted by Anonymous on Tuesday, May 17, 2005 7:39 PM
Thanks Ravenwing! Tom, I know you were partial to the Crescendo and Anthem with the Anthem being your favorite. Why the switch? Is it for NMF only or for all around painting. The reason I ask is that I was thinking about getting an Iwata for Xmas, but only because I think it would be nice to have one due to the hype.

E
  • Member since
    November 2005
Posted by Anonymous on Tuesday, May 17, 2005 7:29 PM
the Revolution and the Eclipse are great Airbrushes, I actually use the HP-SAR for primer and base coats, I like the Iwatas better than anything on the market, but I have been spoiled by them, the Badger 155 Anthem is a great airbrush, a friend of mine has one and he loves it!


QUOTE: Originally posted by H3nav

Speaking of Iwata, anyone have experience with the Eclipse and Revolution bottom feeds? Most of the post on this forum talk about the Iwata gravity feeds.How to the bottle feeder models compare to the Anthem or is it just a personal preference thing? Thanks in advance.

E
  • Member since
    February 2003
  • From: Green Bay, WI USA
Posted by echolmberg on Tuesday, May 17, 2005 12:56 PM
Hey! Azteks work just fine with Alclad! Here's the Mustang I finished using Alclad run through my wonderful Aztek! Slick operation. Smooth finish. Easy clean up. Couldn't be happier. And I also have an Iwata and enjoy that just as much as my Aztek.

  • Member since
    November 2005
Posted by Anonymous on Tuesday, May 17, 2005 8:22 AM
Speaking of Iwata, anyone have experience with the Eclipse and Revolution bottom feeds? Most of the post on this forum talk about the Iwata gravity feeds.How to the bottle feeder models compare to the Anthem or is it just a personal preference thing? Thanks in advance.

E
  • Member since
    November 2005
Posted by Anonymous on Tuesday, May 17, 2005 1:35 AM
if its paint, the Iwata will spray it Big Smile [:D] I have the HP-C Plus.
  • Member since
    February 2003
  • From: Melbourne, Australia
Posted by darson on Tuesday, May 10, 2005 8:35 AM
Hi there Tom old buddy. Of course you can spray ALCLAD lacquer with the HP-CS, I just followed the FAQ on ALCLAD and didn't have any problems at all and yes I was very satisfied with the results.

I use mainly enamels through my HP-CS but have used acrylics (Tamiya & Gunze) without any issues.

Cheers
Darren
  • Member since
    May 2004
  • From: Dallas
Posted by KINGTHAD on Tuesday, May 10, 2005 8:32 AM
Tom, I use both Alclad and acrylic (Vallejo) in my Iwata and I could not be more pleased. Just dont let Kremps see ya with it or she will take it away.

Thad
  • Member since
    July 2004
  • From: SETX. USA
Posted by tho9900 on Monday, May 9, 2005 7:18 PM
Cool thanks! yeah I remember his Mustang now that you mention it.. ok that does make it easier!

Appreciate the help!
---Tom--- O' brave new world, That has such people in it!
  • Member since
    November 2005
Posted by Anonymous on Monday, May 9, 2005 7:16 PM
Saltydog, the Iwata guy who used to be here use Alclad2 very successfully through his CS. I wouldnt worry about Alclad2 in any ab but an aztek so enjoy
  • Member since
    July 2004
  • From: SETX. USA
Iwata HP-CS and Alclad II
Posted by tho9900 on Monday, May 9, 2005 5:55 PM
Quick question for the Iwata HP-CS owners out there... have you sprayed Alclad with your brush and how satisfied were you with it.

Oh yeah, anyone try acrylics, epecially Vallejo through an HP-CS?

I am thinking of getting one and am torn between the HP-CS and CR because of the acrylic thing. But I think the Alclad would be the clincher!
---Tom--- O' brave new world, That has such people in it!
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.