SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Spray booth plenium design

924 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Posted by Anonymous on Sunday, May 15, 2005 10:46 PM
Just an add-on, even if i had to pay 4 this stuff it would cost around 20 bucks, cuz these fans can be found in junkpiles everywhere, i got mine from my neighbor who remodeled her kitchen, it is from the hood over the stove, powerful too!Smile [:)] The plywood is 2 ft. square, but as stated can be any size. Good lighting too. I use a x-large leaf bag (trash bag) for a curtain when painting. Anyhoo, it really does work great, just tryin to help.Shy [8)]
  • Member since
    November 2005
Posted by Anonymous on Sunday, May 15, 2005 10:27 PM
You will prolly laff at mine but total cost was...0. Fan from kitchen hood (free), hose from dryer exhaust leftover (free), plywood leftover from projects (free), filters are 4 A/C, works great! Collar 4 the fan to the hose is trash can (free) Wish I had shorter 1 but have to fit the 7 1/2 inch fan opening so... some wood glue, ring shank finishing nails, a little cutting out and sanding and caulk, man, it works great 4 me!!
Big Smile [:D] http://inescaleodels.fotopic.net/c541345.html
  • Member since
    February 2005
  • From: Cleveland, OH
Posted by RadMax8 on Saturday, May 14, 2005 3:11 PM
Thanks, freind! helped me out a lot!
  • Member since
    November 2005
Posted by Anonymous on Saturday, May 14, 2005 10:35 AM
check out this site dud, i designed mine from the info on this page...
http://modelpaint.tripod.com/booth2.htm
im using this fan
http://www1.jaycar.com.au/productView.asp?ID=YX2520&CATID=&keywords=fan&SPECIAL=&form=KEYWORD&ProdCodeOnly=&Keyword1=&Keyword2=&pageNumber=&priceMin=&priceMax=&SUBCATID=
and im making it outta 9mm MDF, its gonna b 50cm wide, 40 high and 45 deep.
u can make it any size u want, just use the calculations on that site to work everything out!and make sure u get a propper fan, not something like a range hood or bathroom fan!!
also, so a search on this forum and ull find heaps o info bout spray booths!

  • Member since
    February 2005
  • From: Cleveland, OH
Posted by RadMax8 on Saturday, May 14, 2005 8:06 AM
I just came here to ask about designing a spraybooth myself! What kind of material are you going to use for the hood? what kind of filters? I'd like to make a large one because I will be starting on a model that is over 3ft long when completed and i dont want to spend over half a grand. Any help is appreciated!
  • Member since
    November 2005
Spray booth plenium design
Posted by Anonymous on Saturday, May 14, 2005 7:40 AM
hey all!
im in the final stages of designing my spraybooth, and have a question regarding the plenium (sp?)...
ok, i know that its purpose is to even out the air flow across the booth
what i wanna know is whats the best way to design one...
a recess in the booth, (basically just making the booth a bit deeper) and mounting the fan in the middle? (like the one on here )
or a pyramid style plenium with the fan mounted ontop of the pyramid (sorry i cant seem to find a pic)
also, if i were to go the pyramid route, would it matter if the fan was mounted to the bottom of the booth,? ive included a sketch to help describe wot im getting at, hope u guys can make it out coz its not da best drawing


and as usual, thank you very much for the help!!!
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.