Quick-Change A/B kits

Hippy-Ed

Member since
December 2004
From: Stockton,Ca

Posted by Hippy-Ed on Friday, May 12, 2006 7:18 PM

tho9900 wrote:
Eddie - cool! yeah now's about the time those milk jugs come in!!! You'll get it.. just worry about all over, even coverage for now... varying the line width and such can come later!

Just ordered the Paasche Regulator for my compressor so, that ought to give me more action & less pressure on the airflow right? Smile,Wink, & Grin [swg]

If you lose your sense of humor, you've lost everything

Reply

Hippy-Ed

Member since
December 2004
From: Stockton,Ca

Posted by Hippy-Ed on Wednesday, April 26, 2006 7:12 PM

tho9900 wrote:
Eddie - cool! yeah now's about the time those milk jugs come in!!! You'll get it.. just worry about all over, even coverage for now... varying the line width and such can come later!

Fergit da milk jugs!! Angry [:(!]

I gots Lots of plastic 5 gallon buckets Mischief [:-,]

I'm getting the hang of it & am preparing for my 1st group build as well Approve [^]

http://www.finescale.com/FSM/CS/forums/614239/ShowPost.aspx

If you lose your sense of humor, you've lost everything

Reply

tho9900

Member since
July 2004
From: SETX. USA

Posted by tho9900 on Wednesday, April 26, 2006 2:52 PM

Eddie - cool! yeah now's about the time those milk jugs come in!!! You'll get it.. just worry about all over, even coverage for now... varying the line width and such can come later!

---Tom--- O' brave new world, That has such people in it!

Reply

Hippy-Ed

Member since
December 2004
From: Stockton,Ca

Posted by Hippy-Ed on Wednesday, April 26, 2006 9:54 AM

I've been having a blast with the Badger Mischief [:-,]

now that I've got hooked up with the air Thumbs Up [tup]

This is a sweeet A/B which shouldn't take too long to get the feel of the trigger Evil [}:)]

just a little time, practice & above all, patience in order to get the paint flow to be even & not come out so quickly Smile,Wink, & Grin [swg]

If you lose your sense of humor, you've lost everything

Reply

Hippy-Ed

Member since
December 2004
From: Stockton,Ca

Posted by Hippy-Ed on Sunday, April 23, 2006 5:05 PM

tho9900 wrote:
Can't wait to hear what ya have to say once you're hooked up with a hose! I hope it works out for ya!

Hey Tom, to be quite honest, I think it'll be a blast Mischief [:-,]

I'm really looking foreward to it that's for sure & ya can count on some pics when I can get them Big Smile [:D]

I tell ya, I can hardly wait Tongue [:P]

If you lose your sense of humor, you've lost everything

Reply

tho9900

Member since
July 2004
From: SETX. USA

Posted by tho9900 on Sunday, April 23, 2006 5:01 PM

Can't wait to hear what ya have to say once you're hooked up with a hose! I hope it works out for ya!

---Tom--- O' brave new world, That has such people in it!

Reply

Hippy-Ed

Member since
December 2004
From: Stockton,Ca

Posted by Hippy-Ed on Sunday, April 23, 2006 12:51 PM

The Badge came in & I am awaiting the arrival of the air line to come in. It sure feels good in my hand Big Smile [:D]

sits much more comfortably & the trigger action is much more accessible Cool [8D]

If you lose your sense of humor, you've lost everything

Reply

Hippy-Ed

Member since
December 2004
From: Stockton,Ca

Posted by Hippy-Ed on Tuesday, April 11, 2006 8:52 AM

jhande wrote:
Hey Ed,

I'm not sure if these are the ones you are talking about -

You might have :
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=47791

You might be looking at:
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=93506

But I would bump it up a notch, for $20 you could get a Vega 600 single action, bottom-feed of much better quality. You can also get different size paint bottles - thin, short, thick, etc...
http://www.badgerairbrush.com/garagesale.htm

You are correct. I have the 1st. one Smile [:)]

it's good for general over-all painting such as car bodies, Gray/White Navy a/c but, It don't fit right in my hand (like a 5 yr. old shooting a 12 gauge). I was looking at the 2nd item but, I may have a Badger 175 to contend with by this time next week Tongue [:P]

thanks to someone here in the forums for looking around for me & hooking me up without breaking my pocketbook Wink [;)]

If you lose your sense of humor, you've lost everything

Reply

jhande

Member since
November 2005
From: White Mountains, NH

Posted by jhande on Tuesday, April 11, 2006 2:44 AM

Hey Ed,

I'm not sure if these are the ones you are talking about -

You might have :
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=47791

You might be looking at:
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=93506

But I would bump it up a notch, for $20 you could get a Vega 600 single action, bottom-feed of much better quality. You can also get different size paint bottles - thin, short, thick, etc...
http://www.badgerairbrush.com/garagesale.htm

My 2 cents [2c]

-- Jim --
"Put the pedal down & shake the ground!"

Reply

Hippy-Ed

Member since
December 2004
From: Stockton,Ca

Posted by Hippy-Ed on Monday, April 10, 2006 1:03 AM

I have the Central Pneumatic: Hobby Airbrush Kit from Harbor Freight. Got it for $5 on sale and I picked up the central Pneumatic compressor as well. Works good. "if" I can find something better at a "reasonable" price (within my limited budget) I am open to the possabilities...
Thanks Tom, I appreciate your looking around.

Keep the razors sharp fellas!
Eddie

If you lose your sense of humor, you've lost everything

Reply

tho9900

Member since
July 2004
From: SETX. USA

Posted by tho9900 on Sunday, April 9, 2006 7:51 PM

Ed - which siphon fed do you have? Because there's a chance yours is better than that one.. It would do pretty good for all over coverage, and with some coaxing and masking do hard edged camo but not much more than that... let me look around a little bit and see what I can find out for you for a "step up" type brush that won't kill your pocketbook...

---Tom--- O' brave new world, That has such people in it!

Reply

Hippy-Ed

Member since
December 2004
From: Stockton,Ca

Posted by Hippy-Ed on Sunday, April 9, 2006 6:56 PM

Tom, I haven't seen the gravity feeds yet (in person) I did look at dixieart.com and another site today and seen a side feeder. Heck, on my "limited" budget, I'm lucky to afford the paint to run thru my bottom feeder! Black Eye [B)]

My only complaint with the bottom feeder is, I don't like the way it sits in my hand.
What's your take on the Quick-change type gun?

If you lose your sense of humor, you've lost everything

Reply

Hippy-Ed

Member since
December 2004
From: Stockton,Ca

Posted by Hippy-Ed on Sunday, April 9, 2006 6:50 PM

MikeV wrote:
Don't buy that Harbor Freight junk Eddie, get a Badger bro.
Remember this: He who buys cheap, buys twice.

I'ma cheap skate bro Evil [}:)]

For now, I'm a noobee to A/B Ashamed [*^_^*]

and on a "limited" budget. but, thanks for the advice tho, I'll keep it in mind Smile [:)]

If you lose your sense of humor, you've lost everything

Reply

tho9900

Member since
July 2004
From: SETX. USA

Posted by tho9900 on Sunday, April 9, 2006 6:29 PM

Ed- since you have a siphon feed, have ya considered a gravity fed? you can really go to the next level with it and it's a cinch to clean! Both Iwata and Badger make some good ones with decent price tags (dixieart.com, about $65 for either)

---Tom--- O' brave new world, That has such people in it!

Reply

MikeV

Member since
April 2003
From: Hayward, CA

Posted by MikeV on Sunday, April 9, 2006 6:11 PM

Don't buy that Harbor Freight junk Eddie, get a Badger bro. Wink [;)]

Remember this: He who buys cheap, buys twice. SoapBox [soapbox]

“Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon

Reply

Hippy-Ed

Member since
December 2004
From: Stockton,Ca

Quick-Change A/B kits

Posted by Hippy-Ed on Sunday, April 9, 2006 5:38 PM

What is your opinion on a Quick-Change A/B over a single action Bottom feeder? I'm looking at the one at Harbor Freight. I already have their bottom feeder which works pretty good.
just wondering how it is incomparision....
TIA,
Eddie

If you lose your sense of humor, you've lost everything

Reply

THE MAGAZINE

CONTACT US

RECENT ARTICLES

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT REVIEWS

POPULAR TOPICS

RECENT VIDEOS

POPULAR TOPICS

RECENT THREADS

CATEGORIES

NEW PRODUCTS

OUR STORE

CURRENT ISSUE

SEARCH FINESCALE.COM