SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Clear Yellow "NOT"

1000 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2003
Posted by Antagonist on Friday, September 12, 2003 7:14 PM
Ardy299; Thanks for the white base cost tip. I guess my sarcasim through some people off. I am trying to use chrome yellow on my AH-60L and the white base coat should do the trick. Just weird I've never seen a color do that when it wasn't a clear color.
Antagonist
  • Member since
    March 2003
  • From: USA
Posted by ardy299 on Thursday, September 11, 2003 3:50 PM
I've had good results with Model Master chrome yellow by using flat white as a base, yellows can be the most difficult of all colors to work with, they don't always cover well and things tend to bleed through them.

Bob
  • Member since
    May 2003
  • From: The flat lands of the Southeast
Posted by styrene on Monday, September 8, 2003 12:24 PM
13538 denotes the FS number for GLOSS yellow. Unless you've put down a good primer (preferrably a light color), clear yellow is exactly what you're going to get. Recommendation: Get a flat yellow, then overcoat it with a clear gloss. If you are determined to go with the gloss, the best thing may be to mist on several light coats rather than try to coat the piece at one time. Also check your thinning ratios to make sure you're not too thin.
Gip Winecoff

1882: "God is dead"--F. Nietzsche

1900: "Nietzsche is dead"--God

  • Member since
    February 2003
  • From: Tochigi, Japan
Posted by J-Hulk on Monday, September 8, 2003 12:01 PM
Strange problem! The first thing that comes to mind is they may not be mixed thoroughly. Are you stirring them enough? I'm sure you are, but you never know! Are they old bottles, and perhaps the paint has separated from the medium or some other strange transformation has taken place in the molecular structure of the paint? Left in the sun, too hot, too cold, that kind of thing? I've never experienced such a problem, so I can't give you any first-hand advice.

Anyone else with any ideas?
~Brian
  • Member since
    June 2003
Clear Yellow "NOT"
Posted by Antagonist on Monday, September 8, 2003 11:28 AM
Fustrated would be an understatement !

Has anyone else had difficulties with model master chrome yellow #13538 or to my suprise Humbrol's Isg. yellow # 154? I am concurrently working on several models (short attention span) and on my Academy's AH-60l DAP Balck hawk, i have applied 4 coats of these paints and it looks like I'm using clear yellow. I have never had this problem before and I am fustrated, I did clean the plastic before painting and have never had to use a primer with humbol's awesome paints. Humbrol usually applies as if I used my air brush, but this problem has me stumped any help would be great.
Antagonist
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.