SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Primer - Shade question.

584 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2007
  • From: Southampton England
Posted by Viper Has The Lead on Friday, November 9, 2007 1:35 PM
Thanks for all the pointers and info.
                                                If anyone else has looked in, the Auto primers to AVOID, are any that say 'high build' as they are really fillers as well as primers. The plain Auto primer for plastic I've got worked fine, nice coverage and a good shade base for the dark camoflage I'm putting on.
All the best,
Mick C.
"All modern aircraft have four dimensions: span, length, height and politics. TSR.2 simply got the first three right." Sir Sydney Camm
  • Member since
    October 2005
  • From: Maryland
Posted by usmc1371 on Wednesday, November 7, 2007 6:52 AM

I love to use Tamiya's Grey Primer.  So far, it's the best I've used.  I covers great, sands wonderfully, has greating bonding and doesn't obscure details.  The downside is that it's lacquer based and only comes in a spray can.  Being lacquer based is what gives the primer it's strong bonding but smells bad.  I usually decant the primer and use it in my airbrush for finer control.

Jesse

  • Member since
    February 2003
  • From: A Spartan in the Wolverine State
Posted by rjkplasticmod on Tuesday, November 6, 2007 1:04 PM

I only use Floquil Grey Primer.  It's a light grey in color & works well with most colors.  However for Yellow or Red top coats, I add a base coat of white.

Regards,  Rick 

RICK At My Age, I've Seen It All, Done It All, But I Don't Remember It All...
  • Member since
    January 2003
  • From: Peoples Socialist Democratic Republic of Illinois
Posted by Triarius on Tuesday, November 6, 2007 12:32 PM
Some automotive primers produce very thick coatings, which will cover fine detail. I once sanded one for several hours before I got through it.

Ross Martinek A little strangeness, now and then, is a good thing… Wink

  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Tuesday, November 6, 2007 12:14 PM

Hi Mick,

A darker primer can slightly affect the color over it but since we use opaque paints I think you will hardly notice the difference at all. I think it is more prominent in automobile colors which are brighter.

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    January 2007
  • From: Southampton England
Primer - Shade question.
Posted by Viper Has The Lead on Tuesday, November 6, 2007 12:00 PM
Good day all,
                  Been using some of Tamiya's Fine surface primer, no problems with the spray can thing, a first for me. As I've read that a good quality auto primer is ok too, I purchased some Halfords Grey primer for plastic, (auto primer if you don't know the brand over in USA). Question is, the Tamiya is a very light grey finish, while the Halfords is considerably darker, what effect does the shade of the primer have on the top colours? Doing mostly RAF war birds, Dark Greens, Dark Greys and Browns are the primary camo colours, but I was just wondering if there were any problems to look out for.
Many thanks,
Mick C.
"All modern aircraft have four dimensions: span, length, height and politics. TSR.2 simply got the first three right." Sir Sydney Camm
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.