Floquil Polly Scale - Any good?

QUOTE: Originally posted by Kolja94 My only complaint is, yes, with the shade of ONE color I used - Polly Scale's "USSR Underside Blue" doesn't look like the very pale blue-gray I see in most pictures of Soviet planes. Next time, I'll either mix it to the right shade or buy another color!

LOL!!!

According to Erik Pilawskii in his recently published "Soviet Air Force Fighter Colours 1941-1945" that Polly Scale "USSR Underside Blue" is dead on accurate for AII Blue. It's the prints that are not accurate, although weathered, that blue won't look like a flourescent light blue.

I have used Polly Scale and the former Polly S paints for decades. I think they are great. I use their brand of airbrush thinner with them too, which contains ethanol and "propylene glycol methyl ether" (that should be monomethyl or dimethyl ether, if properly named). I have tried using just a plain ethanol / water mix, but I didn't like the results. It seems to cause the pigments to separate, which is probably why they put in the glycol ether. They can be thinned with water, but I think their thinner works better, especially when airbrushing. The entire family of gycol ethers are not exactly great chemicals to be huffing, so use of a respirator and proper ventilation should be SOP.

What do you guys use to thin and/or clean for airbrushing with Floquil Polly Scale Acrylics?

I normally use alcohol with Tamiya acryls, but I need more colors.

I've had excellent results with both, and frankly use both. I did have a LITTLE trouble the first time I used Polly Scale but I attribute that to just not being used to thinning and using that brand of paint - it took a while to find the "just right" proportions. But once I did, it went on smoothly and looked great. I use MM Acryl a little more often because my closest hobby shop stocks them, but when I'm on the road or ordering on line I'll grab either one.

Coverage DOES seem in my experience to be a little better with Polly Scale, and I'm thinking I'm going to try and start using their flat white for ordnance, landing gear struts and wells, etc because it usually takes a few coats of MM Acryl to get the coverage I need.

My only complaint is, yes, with the shade of ONE color I used - Polly Scale's "USSR Underside Blue" doesn't look like the very pale blue-gray I see in most pictures of Soviet planes. Next time, I'll either mix it to the right shade or buy another color!

Reading the bottle tells me that Testors and Floquil/Polly Scale are both owned by RPM, but the variety of product available from Polly Scale seems to me to be greater than Acryl, though Acryl is easier to find. I think the formulas are a bit different, and Polly Scale seems to hand-brush better than Acryl, though they both airbrush very well indeed.

ok, ill be the oddball lol. i would choose model master. more selection and you can choose between acrylic and enamel

I've used them for a number of years without complaint. They coat well, go on smoothly and dry quickly.

i have used the floquil model railroad colors, and they are great, so i would say that they would be very good

These are very high quality paints. They were the basis for the Aeromaster line, and in ease of use they are comparable to Testors Acryl. The color range is good, but not totally exhaustive, and I have heard complaints from a few nitpickers about the precise shades. Of course, all that is quite subjective.