Hi
I ran into problems with getting the gloss coat on, using both vallejo model color and vallejo model air, I get a very rough surface. I have tried both laying down very thin coats and doing very wet coats.. the result is the same.
I'm using around 11psi pressure and tried to vary the distance but could not get any difference in the result. Also when I sand the flat paint with 1200grit wet and dry I still get the same effect.
Here is an example
When using future and sanded the surface with 1200grit I got a smooth surface.
Is it just that the acrylic is drying to quickly? Or is there somting else to cure this problem?
Michael