Enter keywords or a search phrase below:
For those of you in the upper midwest who have a Menards store nearby, they have a sale on Irwin Micro Clamps(bar clamps) this week (I know, not much time left).
Micro clamps refer not to the basic size, but the adjustment. They use a trigger mechanism for adjustment, and the trigger causes a very minute- only a few mils- closure, so you can really adjust the pressure very carefully. I had bought a similar bunch from Harbor Freight a few months ago, but these seem be considerably better quality. These have a 4.5 inch max opening.
They are ordinarily eight bucks for a set of two clamps but the sale offers a five buck rebate on the set (be aware the rebate is only redeemable at Menards, but if you shop regularly at Menards this is not a problem).
Don Stauffer in Minnesota
Thanks for the tip Don...I am always on the lookout for good tool deals. If I need them or not. I picked up the HF ones at a grand opening for $2.00 a piece. They work much better than the old spring types I have.
13151015
Hercmech Thanks for the tip Don...I am always on the lookout for good tool deals. If I need them or not. I picked up the HF ones at a grand opening for $2.00 a piece. They work much better than the old spring types I have.
These Irwin ones are very similar, but even better. They have a bigger release lever, easier to use, and the clamp pads stay on better than the HF ones.
Our community is FREE to join. To participate you must either login or register for an account.