Strong, Pliable Metal Wire?

What about the green wires used in making floral decorations. I know HL has them because its what I used for my Nuclear Powered Space Station.

Nathan,

On the Web, got to Pilots Hq.  When you get there look up Safety Wire and you should be able to find :

Malin MS20995C Stainless stee Wire/.015 dia - $8.95 +shipping will get you a 1 lb can (1655 feet)

One more option to consider,if you want to use guitar string is to invest in a set of wire bending pliers .I bought a set from micro mark years ago and use them much more often than I thought I would.

You want lead wire.

umm-usa.com/.../index.php

You won't get stainless wire locally. I've always ordered my safety wire from an online aviation supplier.

I've looked at some metal wires at Hobby Lobby. They are either too soft or way too thick.

@qmiester

I've done some research on safety wires and they look like exactly what I'm looking for! Hard to beat stainless steel when it comes to strength. I don't know where to get them locally but I see lots of them on eBay and Amazon.

Nathan,

I've got a can of .015 safety wire out at the shop but can't remember exactly remember where I got it.  And being stainless steel, it's pretty strong for it's size.

As long as a metal wire is stronger than a nylon thread, it should work. I guess I'll visit HL & RS, buy a few different wires, try them and stick to the one that works for me. Thanks for many suggestions.

Well, how strong do you need a .01" wire to be? Is this for general scratch building or do you need to make a support pin out of the wire? There is always mechanic's stainless safety wire. Smallest size is .020". I can't see that stuff being much stronger though, just harder to cut.

Magnet wires are made of copper.  They are thin, which I like, and should be very pliable. But are they strong like brass and iron wires?  

This site has a nice chart for converting between diameter and wire gauge;

en.wikipedia.org/.../American_wire_gauge

I echo magnet wire. Its available at radio shack. 0.015" is the thinnest I've found so far.

Hi,

I'm not sure of the exact diameter, but in fly tying I use Ultra wire, comes in brassie, small, medium and large. An array of colors also.

Mike

Great. I'll visit HL. Cutting metal wires is no problem for me.  I play guitar and bass. So I have a super powerful wire cutter to cut massive bass guitar strings made of steel.

Model railroad hand rail wire.

It comes in 3' lengths and is very strong, once you make a bend it will stay. Its hard on side cutters and to save tools best cut with a high speed cut-off disc.

I bought a few lengths and found it very useful for modeling applications, even the smallest bits were valued for small details.

Magnet wire used to be available in a wide range of small sizes.  The decline of hobbyist electronics has made fine copper magnet wire hard to find these days, though.  Used to be Radio Shack and various mail order places had lots of fine sizes, down to about 34 or 36 gauge.  Now, when I throw out any old piece of electronics I go through and look for coils, chokes and transformers with fine wire.  This has been my source of magnet wire in fine sizes for about ten years now.

I do find Michaels craft stores to have an increasing selection of fine wire in their "beading" section.  Not even sure what material these wires are except the obvious brass stuff.

Yep, my mistake. Was thinking .008

I play guitar and have strings of the .010 gauge.  

You can buy soft iron wire at many craft stores. I find it is a fair compromise between pliability and strength. I keep both iron and copper wire on hand.  So called copper "magnet" wire is handy, because it is varnished, which acts as a primer if I have to paint it.

You could try annealing guitar wire,but you won't find it in .01.  .08 is about the thinnest I know of