Lamps & Lighting

I'm actually in the process of redesigning my hobby bench.

Part of the plan is to use a collection of lights to try and generate the correct amount of natural light as if the window was open.

Because 90% of my modeling is done after everyone is asleep, it is an essential that the lighting is spot on.

Plus the fact my current workspace doesn't have enough nooks and crannys in which to store/lose stuff

For most of my model building work I use a 100W incandescent. For color matching and/or painting miniatures I use two fold-up Ott-lights.

Dave

Sean,

I have dual 4 foot flour over the bench and circular lamp like you have on the bench. In the light above the bench I put in a cool white and a hot to get both the reds and blues from the lamp. Using just one or the other can sometimes cause problems as to how they make your paint look.

Regards,
Richard

You all are lucky , I use a MAG light ! J/K , I use an swing type lamp like Mike's with a magnifier built into it and I put a reveal 75 watt bulb in it , I also use a overhead flouresent lamp and a regular lamp , But for real I also use a mini MAG light with the mono fillament adapter to look in hand to see areas .

Walt

QUOTE: Originally posted by Jim Barton When I moved to Phoenix, my former roommate gave me a swing-arm lamp similar to the one pictured above. I'm currently using a 60-watt incandescent bulb in it, but someday, I'd like to try those "Reveal" bulbs; I've heard they're great!

Finally did it! Bought some of those "Reveal" light bulbs I've been wanting to get, and after several modeling sessions using the bulbs, I must say I like them! Aside from the whiter light, I think using the "Reveal" bulb reduces eyestrain a tad. One caveat: "Reveal" bulbs are definitely dimmer than regular light bulbs of the same wattage; you may want to switch to the next higher-wattage bulb. (This might pose a problem if you're already using the maximum recommended wattage for a given fixture.) That aside, I do recommend the "Reveal" bulb.

Brian,

Thanks for that information.

Mike

The wattage of a bulb will affect how long it burns, as will the composition of the filament and the nature of the gasses used inside the bulb. The "reveal" bulbs don't do anything special that should drastically change how long they burn so far as I am able to tell. The do incorperate the use of neodymium in their elements according to the website, but all the Reveal bulbs I ever used seemed to add their bluish hue to the light by the very obvious blue cast of the glass!

Anyway, I've used Reveal bulbs around my home for the past five years and never had issues with them burning out yet...in fact apart from those that were damaged in a move or two, or perhaps buying a new size to fit the new bathroom fixtures etc. I've never needed to replace one yet - I just take them with me if I move.

I would think that for an incandecent, these would make a great choice to model with.

Bri~

I picked up a 4-pack of the 100 watt G.E. "Reveal" bulbs today and I like them.
It is hard getting used to the light not being "yellow" now though.

Mike

My hobby room has three 4 foot fluorescent fixtures but my modeling desk is equipped with 3 swing arm lamps with 100W incandescents. (really cuts down on shadows and the local dime store sells them for 9 bucks). Also have a magnifying lamp with a 75W bulb in it that I switch with one of the swing arms when I want to do close up work. Like the set up very much but have to keep a small (6") oscillating fan running if I'm going to work more than an hour. (Heat ya know).

QUOTE: Originally posted by Jim Barton Well, they are GE light bulbs, and as a general rule, GE light bulbs don't last to begin with. In my old apartment, I was forever changing the light bulbs in the bedroom fixture, and these were plain old 60 watt bulbs. Shoot, David Letterman for years has made cracks about GE light bulbs in his "Top Ten" lists.

Thanks Jim.
I wasn't aware of that fact.
I am still going to try some as the yellow light spectrum of regular incandescent bulbs can make colors look off when they are not.

Mike

I just use a swing-arm lamp with a 100w bulb. It's been fine for me. Provides more than enough light!

QUOTE: Originally posted by MikeV Jim, I did a search with Google and found a link to a post that someone was complaining about the 100 watt Reveal bulbs not lasting very long. I wonder how long they do last? Mike

Well, they are GE light bulbs, and as a general rule, GE light bulbs don't last to begin with. In my old apartment, I was forever changing the light bulbs in the bedroom fixture, and these were plain old 60 watt bulbs. Shoot, David Letterman for years has made cracks about GE light bulbs in his "Top Ten" lists.

in addition to 100 watt standard garage lighting for the room, I use a head lamp that I picked up for about $10 at my local department store. It is incandescent, and runs on 2 AA batteries. The only short-coming is the fact that it FLIES through the batteries. This being said, I love the hands free ability to maneuver it in order to see in the weird little nooks and crannies that we all have had to deal with!

Jim,

I did a search with Google and found a link to a post that someone was complaining about the 100 watt Reveal bulbs not lasting very long. I wonder how long they do last?

Mike

When I'm modeling at the kitchen table I have one 60w incandescent overhead and 5 windows covering 3 sides. When I'm working in the garage on my RR layout I have a 2-tube 48" fluorescent overhead and in the shop I have two 2-tube 48" fluorescents over the workbench. My 5x swing arm magnifier has dual fluorescents - one on each side of the lens.

The 5x mag. and bright light helps this old guy see better.

QUOTE: Originally posted by Jim Barton When I moved to Phoenix, my former roommate gave me a swing-arm lamp similar to the one pictured above. I'm currently using a 60-watt incandescent bulb in it, but someday, I'd like to try those "Reveal" bulbs; I've heard they're great!

Jim,

Since you mentioned it I want to try them too.
They sound great here:
http://www.gelighting.com/na/reveal/media_faqs.html

Mike

I have two swing-arm lamps on my workbench, each with a "Reveal" bulb in them, and they're great.

When I moved to Phoenix, my former roommate gave me a swing-arm lamp similar to the one pictured above. I'm currently using a 60-watt incandescent bulb in it, but someday, I'd like to try those "Reveal" bulbs; I've heard they're great!

I also use a swing arm lamp. Mine is old and the weighted base has broken, so I have mounted it on a 2x4 with a couple of "C"clamps to the table.

As long as it keeps working, I will keep using it.

Also, since my workspace is small, I also use my paintbooth's lights. They are the Halogen type that mount under kitchen cabinets. As I have said elsewhere, they are great for drying.

--------------------------
Sorry, didn't read the entire question. I guess since I am not looking for accuracy, I do not have lights that would fit the question.

Incandescent lamps are in the yellow spectrum
Fluorescent have a tenndency to be in the green spectrum, while the daylight and full spectrum bulbs are in the red/pink spectrum.

I use 12V mr16 quartz halgeon lights to light my bench. They are the closest to "white" as you are going to get.

There are other things that affect the general light spectrum that your eye picks up - light reflected off glossy surfaces ie: a stained oak table top will reflect browish yellow light.

I use a swing arm lamp with a 100 watt incandescent bulb like this:



Mike

The full spectrum florescents aren't all that and a bag-o-chips...at least not the one's I've seen. They are a bit better at toning down the harsh blue light from standard tubes though. I still prefer incandecents, but now find that I like the "Reveal" type bulbs. These are incandecents that have a light bluish coloring to the glass and they afford a "whiter" light than standards.

Kinda the reverse of the tube light idea.

Anyway, there is no replacement for good ol' sunlight, but you may also want to cinsider the type of lighting in which the model is most likely going to be displayed. You can then alter colors accordingly if needed.

B~