SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

VMS Liquid Mask

4131 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Saturday, June 22, 2019 10:43 PM

Phil_H

How is it when applied over acrylics? 

The ones i have used (Humbrol Maskol and GSI Creos Mr Masking Sol Neo) have a habit of eating through an acrylic base colour if applied too heavily.

 

I don't know since this was my first go of it. That is good to know, and to watch for. I will spray a wing, try the camo, and see what it does to acrylic.

PS. The paint I masked over is acrylic. I did notice some paint loss where I was scraping on one edge. I assumed is was because of my scraping. I will do more testing.

  • Member since
    August 2005
  • From: Sydney, Australia
Posted by Phil_H on Saturday, June 22, 2019 10:34 PM

How is it when applied over acrylics? 

The ones i have used (Humbrol Maskol and GSI Creos Mr Masking Sol Neo) have a habit of eating through an acrylic base colour if applied too heavily.

  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Saturday, June 22, 2019 10:27 PM

Tojo72

Thanks,good to know,perhaps will work for hard edge armor or a/c camo ?

Is it okay for enamels and acrylics ?

 

All good questions. I used Alclad lacquer the harshest of the three paints so, I am sure acrylics are fine, and I would guess enamels should work too. 

I wondered about camo and if it would be a good fit. I don't really know. Will it give nice clean lines? It would have to be tried. I'll do some experimenting and report back.

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Saturday, June 22, 2019 9:32 PM

Thanks,good to know,perhaps will work for hard edge armor or a/c camo ?

Is it okay for enamels and acrylics ?

  • Member since
    July 2014
  • From: Franklin Wi
VMS Liquid Mask
Posted by Bakster on Saturday, June 22, 2019 7:36 PM

Greetings, I just tried a product called VMS Liquid Mask, and I have to tell you that this is a masking product I had wished for for a long time.

What I like:

1. It flows nicely. (It's NOT self-leveling). What I mean is that you apply a drop on the piece, and it holds its shape. Then, you take a paintbrush or whatever and move it around the areas that you want masked. You can get into nooks and crannies, and the liquid creates a thin masking layer. It works great to flow along demarcation edges. It is very easy to apply, and it dries in about a half hour. Also--I did not see any evidence of the mask pulling up paint. In my test I had used Alclad so, "maybe" that could change with other paints? I suppose like with any mask the more paint you apply, the more risk of  fracturing. 

2. The mask comes off the piece in relatively large sections. I did need to pick some areas with a hobby knife, but they came off easily. I think if I had applied a thicker layer it would have come off better. Either way, it worked very well.

In the example below I had masked the base and painted the tank. This worked great for flowing the mask under and around the tank assembly.

I purchased the product off Ebay. The supplier that I went with ships from Poland. It took about two weeks to arrive in my area, Stateside, but the Post Office bungled some things delaying it another week. I suspect that it will be more readily available in the States sometime soon. I noticed Michigan Toy Soldier & Figure is carrying the VMS line of products. This can be purchased through them, though, it does not look like it is in stock.

Is it perfect? No, but, it is dang close, and it is the best liquid masking product I have used. 

Two things I should mention. They say the mask should be removed in WITHIN 24 hours. Secondly, they say to use a brush. Just a heads up that you should use a brush you don't care about because it mucks the brush up bigtime. I will probably switch to using toothpicks, or maybe even a hobby blade.

Below is a video telling more about the product.

https://www.youtube.com/watch?v=P9iAs3_oFJI

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.