SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Tumble dried models

2220 views
26 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2005
  • From: Piscataway, NJ!
Tumble dried models
Posted by wing_nut on Friday, October 6, 2006 12:41 PM

Just got a new dryer that has a sweater rack.  It clips inside so a sweater can lay flat to dry without being tumbled.  Set on the delicate cycle, barely gets warm, and it is a quick dry booth with filtered air.  Works great… just don’t let the wifey see you do it.  That is a 1/144 Fw with a 3 inch wing span but there is room in there of a fairly big plane, tank… whatever.

Marc  

  • Member since
    November 2005
Posted by Anonymous on Friday, October 6, 2006 2:10 PM
throw some dirty socks in there for that subtle worn and weathered look.
  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Friday, October 6, 2006 3:08 PM

 goat monkey wrote:
throw some dirty socks in there for that subtle worn and weathered look.

 

Weathering is supposed to make it look bad... not smell badSmile,Wink, & Grin [swg]

Marc  

  • Member since
    March 2006
  • From: Boyertown, PA, USA
Posted by Dubau on Friday, October 6, 2006 5:27 PM
Laugh [(-D]
" You've experienced a set back, and without set backs and learning how to fix them you'll never make the leap from kit builder to modeler "
  • Member since
    September 2006
  • From: Newfoundland, Canada
Posted by ZzZGuy on Friday, October 6, 2006 10:11 PM
Gawh.... I'd be too terrified to put a model on that rack for fear of it falling off somehow and burning down the house in a unforseen way.

But niftey idea.

Mongol General: Conan, What is best in life?
Conan: To crush your enemies, see them driven befor you, and hear the lamentations of the woman!

  • Member since
    January 2004
  • From: Peru, IN
Posted by leadsled on Friday, October 13, 2006 11:36 PM

 ZzZGuy wrote:
Gawh.... I'd be too terrified to put a model on that rack for fear of it falling off somehow and burning down the house in a unforseen way.

But niftey idea.

Sign - Ditto [#ditto] That's my kind of luck Big Smile [:D]

  • Member since
    August 2005
  • From: Greencastle, IN
Posted by eizzle on Thursday, October 26, 2006 7:10 PM
How in the heck would you explain that one to the fire department and then your wife???

Colin

 Homer Simpson for president!!!

jwb
  • Member since
    February 2006
  • From: Parkton, NC
Posted by jwb on Thursday, November 9, 2006 9:23 PM

Isn't funny how when you're a modeler, the world falls into 3 categories:

  • Model
  • Tool for modeling
  • Potential tool for modeling that the use just hasn't been discovered yet

I love the dryer idea!

Wonder if the dishwasher could be used to wash a kit before building? And the crockpot..... gotta be a use there.....

Smile [:)]

Jon Bius

AgapeModels.com- Modeling with a Higher purpose

"For I know the plans I have for you," declares the Lord, "plans to prosper you and not to harm you, plans to give you hope and a future." ~ Jeremiah 29:11

  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Monday, November 13, 2006 11:55 PM

Get a cardboard box, line it with aluminum foil and install a 100 watt bulb in the top.

Makes a great drying oven especially with a towel draped over the front. Thumbs Up [tup]

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    March 2006
  • From: Right Side of a Left State
Posted by Shellback on Tuesday, November 14, 2006 12:06 AM

Microwave anybody ?Dinner [dinner]

Plastic ala mode -l

  • Member since
    February 2003
  • From: Panama City, Florida, Hurricane Alley
Posted by berny13 on Tuesday, November 14, 2006 9:19 AM
 jwb wrote:

Isn't funny how when you're a modeler, the world falls into 3 categories:

  • Model
  • Tool for modeling
  • Potential tool for modeling that the use just hasn't been discovered yet

I love the dryer idea!

Wonder if the dishwasher could be used to wash a kit before building? And the crockpot..... gotta be a use there.....

Smile [:)]

You mean like this?  Big Smile [:D]

Berny

 Phormer Phantom Phixer

On the bench

TF-102A Delta Dagger, 32nd FIS, 54-1370, 1/48 scale. Monogram Pro Modeler with C&H conversion.  

Revell F-4E Phantom II 33rd TFW, 58th TFS, 69-260, 1/32 scale. 

Tamiya F-4D Phantom II, 13th TFS, 66-8711, 1/32 scale.  F-4 Phantom Group Build. 

 

  • Member since
    March 2006
  • From: Drummondville, Quebec, Canada
Posted by Yann Solo on Tuesday, November 14, 2006 10:11 AM
 wing_nut wrote:
Just got a new dryer that has a sweater rack.  It clips inside so a sweater can lay flat to dry without being tumbled.  Set on the delicate cycle, barely gets warm, and it is a quick dry booth with filtered air.  Works great… just don’t let the wifey see you do it.  That is a 1/144 Fw with a 3 inch wing span but there is room in there of a fairly big plane, tank… whatever.

Actually, that aircraft was 1/72 before tossing it in there!Wink [;)]

No matter where you go ....... there you are.
  • Member since
    December 2002
  • From: Reno, NV
Posted by espins1 on Tuesday, November 14, 2006 10:46 AM
 Yann Solo wrote:
 wing_nut wrote:
Just got a new dryer that has a sweater rack.  It clips inside so a sweater can lay flat to dry without being tumbled.  Set on the delicate cycle, barely gets warm, and it is a quick dry booth with filtered air.  Works great… just don’t let the wifey see you do it.  That is a 1/144 Fw with a 3 inch wing span but there is room in there of a fairly big plane, tank… whatever.

Actually, that aircraft was 1/72 before tossing it in there!Wink [;)]

ROTFL!!!  Big Smile [:D]Big Smile [:D]Big Smile [:D]Big Smile [:D]

Scott Espin - IPMS Reno High Rollers  Geeked My Reviews 

  • Member since
    March 2005
  • From: West Virginia, USA
Posted by mfsob on Tuesday, November 14, 2006 10:51 AM

You guys are deeply, deeply disturbed ...

Which is no doubt why I feel so at home here.

  • Member since
    March 2006
  • From: Drummondville, Quebec, Canada
Posted by Yann Solo on Tuesday, November 14, 2006 10:55 AM
You just found the solution to my shelf space problem.  I will just shrink them.Big Smile [:D]
No matter where you go ....... there you are.
  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Tuesday, November 14, 2006 1:47 PM

Berny... if you are gonna throw it in the dishwasher... why did you weather it in the 1st place?Wink [;)]

 Nice to see I am not the only one the washes "disposable" food stoage stuff.

 

 mfsob wrote:

You guys are deeply, deeply disturbed ...

Which is no doubt why I feel so at home here.

You are correct...We are disturbed... I was going to get professional help....NOT!Big Smile [:D]

Marc  

  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Tuesday, November 14, 2006 4:53 PM
 mfsob wrote:

You guys are deeply, deeply disturbed ...

Which is no doubt why I feel so at home here.

A statement of truth! Laugh [(-D]

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    March 2006
  • From: Drummondville, Quebec, Canada
Posted by Yann Solo on Wednesday, November 15, 2006 7:09 AM
 mfsob wrote:

You guys are deeply, deeply disturbed ...

Which is no doubt why I feel so at home here.

Hey YOU'RE the one who puts his models into a tumble dryer!!!!!!Laugh [(-D]

No matter where you go ....... there you are.
  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Wednesday, November 15, 2006 12:27 PM
 Yann Solo wrote:
 mfsob wrote:

You guys are deeply, deeply disturbed ...

Which is no doubt why I feel so at home here.

Hey YOU'RE the one who puts his models into a tumble dryer!!!!!!Laugh [(-D]

\

 

No... that was me.Big Smile [:D]

Marc  

  • Member since
    March 2006
  • From: Drummondville, Quebec, Canada
Posted by Yann Solo on Wednesday, November 15, 2006 12:39 PM

Oh!  Sorry!

So he might be healthy then!

No matter where you go ....... there you are.
  • Member since
    February 2003
  • From: Panama City, Florida, Hurricane Alley
Posted by berny13 on Thursday, November 16, 2006 9:59 AM
 wing_nut wrote:

Berny... if you are gonna throw it in the dishwasher... why did you weather it in the 1st place?Wink [;)]

 Nice to see I am not the only one the washes "disposable" food stoage stuff.

Disposable?   Shock [:O]    I didn't know that!!    Sign - Oops [#oops]   Now I will have to throw them away.   Sad [:(]

Berny

 Phormer Phantom Phixer

On the bench

TF-102A Delta Dagger, 32nd FIS, 54-1370, 1/48 scale. Monogram Pro Modeler with C&H conversion.  

Revell F-4E Phantom II 33rd TFW, 58th TFS, 69-260, 1/32 scale. 

Tamiya F-4D Phantom II, 13th TFS, 66-8711, 1/32 scale.  F-4 Phantom Group Build. 

 

  • Member since
    November 2003
  • From: Oklahoma
Posted by chopperfan on Wednesday, November 22, 2006 11:10 AM
 berny13 wrote:
 wing_nut wrote:

Berny... if you are gonna throw it in the dishwasher... why did you weather it in the 1st place?Wink [;)]

 Nice to see I am not the only one the washes "disposable" food stoage stuff.

Disposable?   Shock [:O]    I didn't know that!!    Sign - Oops [#oops]   Now I will have to throw them away.   Sad [:(]

If those are disposable, then I won't have any bowls left!!!!

Randie [C):-)]Agape Models Without them? The men on the ground would have to work a lot harder. You can help. Please keep 'em flying! http://www.airtanker.com/
  • Member since
    March 2006
  • From: Right Side of a Left State
Posted by Shellback on Friday, December 1, 2006 3:40 PM

Wow , this is a clean and dry thread !

It should get the Good House  Keeping Award .Approve [^]

  • Member since
    January 2005
  • From: returning to the FSM forum after a hiatus
Posted by jinithith2 on Saturday, December 9, 2006 5:42 PM

what if your wifey hijacks the little rack and makes it so that it falls off during the cycle?

LOLOL

*kkkttccchhh*

  • Member since
    March 2006
  • From: Right Side of a Left State
Posted by Shellback on Saturday, December 9, 2006 7:00 PM
Static and cling free also ............Tongue [:P]
  • Member since
    December 2005
  • From: Alabama USA
Posted by davew6003 on Sunday, December 10, 2006 10:20 AM
did you use a dryer sheet? 
  • Member since
    March 2006
  • From: Right Side of a Left State
Posted by Shellback on Monday, December 11, 2006 8:59 PM
Would that help .........Confused [%-)]
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.