Japanese Cruiser Torpedo Locations?

The book "Kaigun" by Evans & Peattie has a long discussion of the developement of the torpedo tube mountings and doctrine on cruisers. The earliest "treaty" cruisers mounted fixed tubes that resulted in the ships being somewhat top heavy. Later ships used a smaller number of "trainable" mounts, ie they could be positioned at any angle so long as the tube was clear of the superstructure. Aiming involved both the angle the tubes were set at and the exact timing of firing them. Most pictures and model kit instructions show the tubes in the "stowed" position. Hope this helps.

Alright thanks, it helps a lot, it's been giving me a bit of  a headache.

They could rotated all around.

You know,I know they could be rotated all around,but if they only have one fixed firing position,i'm not sure.

Okay thanks, I saw that first picture on wikipedia but never would've guessed those were the tubes, thanks for the help.

On a side note would the torpedoes swing out to the sides just slightly and fire forwards or would they swing out all the way and fire to the left or right of the vessel?

And this shot of the Mikuma before she sank also illustrates the location of the tubes:

http://en.wikipedia.org/wiki/File:Sinking_of_japanese_cruiser_Mikuma_6_june_1942.jpg

Internal explosions blew some of her launch tubes out of position, and they can be seen extended and dropping to the sea.

http://en.wikipedia.org/wiki/File:Takao_class_recognition_drawings.jpg

do you see those two openings just below and forward of the two smoke stacks ? those are the tubes in there.I think it's similar on the other two classes.