SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

What Does Your Workbench/Work Area Look Like?

27364 views
81 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2011
Posted by stymye on Friday, October 14, 2011 1:02 AM

my hobby area is the size of an 18" x 12" cutting mat.

Kits stored on top of a dresser and  supplies in a plastic 4 drawer stand.

paint booth is outside ..lol

it works but I have to put everything away all the time ,,, that part sux 

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Friday, October 14, 2011 11:52 AM

LOL, thanks, Devil Dawg and Electric Blues!  That's a chocolate stout from Brooklyn Brewing Company.  That was Christmas 2009, I think, friends gave me the case as a present.

"What's on the bench?"  Devil Dawg, that is an excellent, but dangerous question Big Smile  I have going:

the Monogram Zero and the SBD, to finish as an A-24, for Hammer's Monogram Mafia group build

the Monogram and ICM P-51B's, which were originally for my club's December meeting.....in 2010

HobbyBoss' 1/700 Arizona, which I am finishing as her sister and lead ship of the class, the Pennsylvania, as she appeared circa 1935.  That's for a fellowship build at AgapeModels (it's our FellowSHIP build)

Hasegawa's 1/700 Essex, stuck at the point of adding the hangar deck

Tom Daniel's Red Baron hot rod by Monogram, for another fellowship build at AgapeModels

A Monogram P-47D bubbletop

An old Aurora Boeing F4B-4

An old Lindberg Curtiss F11C Goshawk

An old Pyro Hawker Fury

A pair of P-36s in 1/72 by Monogram

and a bunch of 54mm Seven Years War  and Imperial German figures by various manufacturers.  I finish them in a glossy finish, but I look for figures with as much detail as possible.  I like detail but I also like the look of a toy.  No red dots on the cheeks, though.  I set them up at Christmas, like this:

That;s a mix of commerically-finished figures (the grenadiers marching past) and ones that I've painted (most of the figures in reviewing party)

So you can see, I don't just get Advanced Modeler Syndrome, I'm a short-attention-span modeler Wink

 

The bigger the government, the smaller the citizen.

 

 

  • Member since
    March 2005
  • From: Lancaster, South Carolina
Posted by Devil Dawg on Friday, October 14, 2011 1:57 PM

Wow, Baron! That is a fine-lookin' little army you have there. It would seem to me that figures would be less time-consuming to complete than, say, a 1/48th scale aircraft model, mainly because there is no cockpit to assemble, no gear bays, no bomb bays, etc. You just kinda assemble it, take care of the seams and flash, then brush paint, and maybe shoot it with an over-all gloss or dull coat. Am I correct, or am I over-simplifying it? Not to say that figures are less of a job that any other form of modeling. The point I'm getting at is that maybe I should I convert to figures. Maybe then I would complete a model in less than 3 years............

Regardless, your figures are just outstanding! Not sure if my eyes could handle something that small and intricate. Keep up the good work!

Oh, before I forget - I've never heard of chocolate stout. How does it taste? I'd be willing to try something like that. Does it go well with chocolate cake? 

Devil Dawg

On The Bench: Tamiya 1/32nd Mitsubishi A6M5 Model 52 Zeke For Japanese Group Build

Build one at a time? Hah! That'll be the day!!

  • Member since
    January 2006
  • From: California
Posted by SprueOne on Sunday, October 16, 2011 8:26 PM

stymye

. . .

paint booth is outside ..lol

it works but I have to put everything away all the time ,,, that part sux 

 

paint booth is outside, me too, haha

 

right now my bench is occupied 

Tags: pets

Anyone with a good car don't need to be justified - Hazel Motes

 

Iron Rails 2015 by Wayne Cassell Weekend Madness sprueone

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Monday, October 17, 2011 12:17 PM

Hey, thanks, Dawg!  And I understand your question.  You're correct about figures, but with qualifications.  There's less material to process, let's say, than building, oh, say, Monogram's B-29.  But you can still go nuts--as I do-collecting research materials, tracking down figures, etc.  And you can really go nuts--as I do--and start casting your own.  I am teaching myself to sculpt, too.

Now let's talk about how you choose to finish your figure, and what you use to paint it.  In my style, I can finish a figure over a couple of evenings, keeping the stock figure, and just using fast-drying enamels and acrylics.  If I use oils, which I do for some things, that draws out the completion time, and I could assemble a 1/48 single engine aircraft, in the same period.  But if you paint in matte style, or "connoisseur style", as we sometimes call it, you could take as long or much longer, as you might take putting together a piece of Dragon armor.  So, it all depends.  A lot of the figures in that photo are still in the same spot on the bench Big Smile  It's just like any other subject that I build, I'll start, get fired up, then hit a block and switch to something else for a while and come back to the first kit later.

I do use an Optivisor, have for several years.  I can't focus at the close distances required to paint fine details, like I used to.

As to the chocolate stout, it's hard to say.  I think they add cocoa to the mash, so it's not a sweet chocolate taste, but more like you'd get if you tasted cocoa powder.  It enhances the smoky flavor you have with a stout.  I've had some coffee stouts, too, that added roasted coffee beans, for the same kind of effect.  I'd say it goes with chocolate cake, as well as good roasts, soups, chili.  I like stouts in the winter, especially.

If you like stouts and porters, I do recommend trying a Bourbon barrel stout.  That is a stout that has been aged in used Bourbon barrels.  It picks up the flavor of the Bourbon, and when it's done well, it's an excellent variety.  Old Dominion Brewery in Virginia was the first one I ever had; they bought used barrels from the Jack Daniel's distillery.  You got the roasted malt flavors from the stout, with the oaky bourbon flavor, really excellent!

Wow!   That was a lot to mull over.  Pour yourself a beer and think about it Wink

The bigger the government, the smaller the citizen.

 

 

  • Member since
    August 2003
  • From: Camp Leatherneck, Afghanistan
Posted by bilbirk on Tuesday, October 18, 2011 2:51 AM

Mine doesn't get much use right now since I'm working overseas but one day I will be here

That's also the reason it looks halfway decent!

  • Member since
    July 2011
  • From: Vermont
Posted by JTBuckley on Wednesday, October 19, 2011 11:02 PM

This is my workbench.... You can't tell from the picture but it's in the living room of my apartment so all of my critics can comment. By critics I mean all of my friends, and roommate, who come over and expect my work to look the models they see in the FSM mags on my coffee table. Keeps me humble!

 

 

Sorry for poor pic quality...From my cell phone.

Building:  Trumpeter 1:350 Pyotr Velikiy

  • Member since
    July 2010
  • From: Surrey B.C. Canada
Posted by Subhuman1 on Saturday, October 22, 2011 2:25 PM

Just added this unit, to my area, 48x18" heavy duty shelving unit, with the shelves spaced out to provide an extra work surface, threw my paint rack that I cobbled together over the summer in there, along with a 48" fluorescent fixture, and good to go!

 

 



Uploaded with ImageShack.us

  • Member since
    January 2011
Posted by William B. Barney on Sunday, October 23, 2011 1:33 AM

I really enjoying and very interested to see their own Workbench and where they was working on it.  Okay, I like to sharing with you of my workbench that where I working with many models.  Of course, my place are in basement with good size of room. First thing I am huge fans of the Titanic histories as you see there a lot of Titanic pictures and etc hangs on the walls. :)

   Right now,  I am working on the 1/144 scales Titanic wreck. And other not finishes 2 of 6ft the Titanic and Titanic's sister HMHS Britannic as Hospital ship will builds after finish with the Titanic wreck. One that I was posted on here with finished of 1/350 scales of Britannic wreck. And not finish of Battleship Bismarck wreck. and other many not finish model around there!    Enjoy!! :)

                                       

   Regards, William B. :)

  • Member since
    June 2009
  • From: Metepec, Mexico
Posted by Electric Blues on Sunday, October 23, 2011 8:28 PM

Subhuman1

 

 

http://img31.imageshack.us/img31/3341/newbench.jpg

Uploaded with ImageShack.us

 

I love that paint rack! I will definitely try to build something like that. It seems like a great space saver. Thanks for posting!!!

  • Member since
    July 2010
  • From: Surrey B.C. Canada
Posted by Subhuman1 on Monday, October 24, 2011 6:59 AM

Might be a little hard to tell from the pictures, but if you notice, the bottom five shelves on that rack are all stepped, so there is actually two tiers to each shelf, making a total of ten shelves that will hold bottles as big Testors MM paints, or Tamiya 10ml small round bottles.

The very top shop shelf (you can just see it underneath the light fixture, is a full width shelf used for bigger bottles, craft paints etc.

  • Member since
    July 2010
  • From: Tornado Alley
Posted by Echo139er on Monday, October 24, 2011 8:16 AM

I too love that paint rack of yours Subhuman.

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Monday, October 24, 2011 11:47 AM

OK, I'm joining in, too, Subhuman, I like your paint rack!

I am toying with the idea of adding a hutch structure to the back of my bench, to support shelving/storage, and to include a paint rack.  Right now, I store my paints in a wooden painter's toolbox (from D. Blick's) and a couple of Danish butter cookie tins.  It's a pain to have to have to go through 3 separate storage areas, when I want a bottle or tube of paint (I know where everything is, but there's only enough room for to have one of the storage containers open at any time).

I'm also thinking of adding some angle stock and plywood shelving under the bench, on either side of the knee hole, to store more of my stash kits.  I really want to clean up my guest room on the first floor Wink

The bigger the government, the smaller the citizen.

 

 

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Monday, October 24, 2011 5:21 PM

Wish I was a cabinate-maker... I got this idea of a rear rack to hold paint, up to the size of 3 oz. rattle cans, that's more or less a tank-track contraption that will operate same-same, just in the vertical vs horizontal position... 

That way I can double the number of shelves without doubling the size of the  rear rack.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Monday, October 24, 2011 5:37 PM

Prior to moving at the begining of June this year, since late 1995 this was my set up. A painting area in the garage

and a building area in my hobby room

After the move in June, I was exiled for all hobby stuff into the garage...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    November 2008
  • From: Jefferson City, MO
Posted by iraqiwildman on Monday, October 24, 2011 9:08 PM

Corner of my basement's "Fortress of Solitude"

Airbrush area with my high-dollar spray booth.

I always like these post. Give me lots of ideas how to improve my own bench.

Tim Wilding

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Tuesday, October 25, 2011 12:59 AM

Had to re-think my last idea.. Forgot about having to clamp everything into place since it'd get turned upside-down on the back side.. Instead, I go with a sliding vertical track on each end of the paint/parts shelving...

To the left of my compressor/airbrush station, a table for the vacuform, the right, at 90 Degrees, PC and keyboard...

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Tuesday, October 25, 2011 11:49 AM

Hans von Hammer

Wish I was a cabinate-maker... I got this idea of a rear rack to hold paint, up to the size of 3 oz. rattle cans, that's more or less a tank-track contraption that will operate same-same, just in the vertical vs horizontal position... 

That way I can double the number of shelves without doubling the size of the  rear rack.

C'mon, Hammer, build it!  Think of it as scratchbuilding, in 1:1, with wood instead of styrene Wink

The bigger the government, the smaller the citizen.

 

 

  • Member since
    March 2003
  • From: Fort Worth, TX
Posted by RESlusher on Tuesday, October 25, 2011 11:56 AM

You guys have such cool set ups!!  Bow Down

My wife makes me put all my toys away when I'm done playing!!  Crying  I do my building in my big, comfy chair in the living room with a TV tray as my work bench. 

Occasionally she lets me brush paint at the dining room table; but only after I put down my place mat of sheet plastic down!  We don't wanna mess up the dining room table do we?

When it comes to air brushing I'm banished to the garage.

Did I mention that my TV tray workbench also has my laptop on it??

 

Richard S.

On the bench:  AFV Club M730A1 Chaparral

On deck:  Tamiya Marder 1A2

In the hole:  Who knows what's next!

 

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Tuesday, October 25, 2011 10:18 PM

I do my building in my big, comfy chair in the living room with a TV tray as my work bench. 

Did the same (except I used the couch) up until just a couple three years ago... 

C'mon, Hammer, build it!  Think of it as scratchbuilding, in 1:1, with wood instead of styrene

LOL... I could do it, I reckon... It's just that I don't wanna spend the money on an entire new set of tools...  Might be just a little too much to do with the Dremels and X-Actos I use scratch-building Monogram cockpits...

  • Member since
    August 2006
  • From: Arkansas
Posted by K-dawg on Wednesday, October 26, 2011 9:59 AM

Started putting my shop/man cave together last night at the new house. Will get picks up soon. Some good shop ideas here.

Kenneth Childres, Central Arkansas Scale Modelers

  • Member since
    August 2011
  • From: Perth, WA
Posted by NeedBeer on Friday, October 28, 2011 12:42 AM

Our dining room - easy access to beer, whisky, couch & sport on TV:

Note to myself - I need Paint shelf unit, laptop station & spraybooth. Got to find somewhere to put those bikes!

 

WiP

1/24 Hawker Hurricane Mk I

1/48 F-22 Raptor; F-22 Idolmaster,  DH Vampire, Saab Gripen 

1/72 C-130 Hercules; Vulcan 

1/350 Bismarck

 

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Friday, October 28, 2011 12:02 PM

Hans von Hammer

C'mon, Hammer, build it!  Think of it as scratchbuilding, in 1:1, with wood instead of styrene

LOL... I could do it, I reckon... It's just that I don't wanna spend the money on an entire new set of tools...  Might be just a little too much to do with the Dremels and X-Actos I use scratch-building Monogram cockpits...

You know what, Hammer--you actually could build a rack with those tools, using luan plywood.  It would need some interior bracing, perhaps, like vertical partitions between the horizontal pieces, but then again, maybe not, since most paint bottles are small enough that they wouldn't weigh enough to make the shelves sag.

I can see taking a piece for the back, laying out the lines where the shelves would go, and then using a cutting bit chucked into a Dremel to rout out dadoes to receive the shelves.  You can cut the stock with a cutting wheel, or with the razor saw.  And if you'd want vertical supports between the shelves, I can see cutting those and keying the shelves and vertical pieces with slots, so they fit into one another, like an insert in a case of beer bottles, say.  A little white glue to assemble everything, and you could do it.

I use luan for buildings in 54mm, and I use my Dremel to do a lot of the cutting.

Yes, it could be done.  Hmm....

The bigger the government, the smaller the citizen.

 

 

  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Friday, October 28, 2011 4:29 PM

Oh, I know I could do it.. That's not the issue...  Lemme re-phrase...  I don't wanna do it...Cool

  • Member since
    June 2006
Posted by KennyB on Saturday, October 29, 2011 8:16 PM

Well here it is, the operating room. I call it that because hardly anything gets built out of box, there's always some surgery to do

 

 

 

                                                                                                                                Ken

  • Member since
    August 2011
  • From: Hayward, CA
Posted by GreenThumb on Saturday, October 29, 2011 11:13 PM

Wow Ken! That is a sweet setup my friend. Yes

Mike

 

 

  • Member since
    March 2011
  • From: St Louis, Mo
Posted by MSgtMJ62 on Sunday, October 30, 2011 9:02 AM

I agree! Nice set up Ken

 

  • Member since
    February 2011
  • From: Ontario, Canada
Posted by gunner_chris on Sunday, November 6, 2011 11:30 PM

I finally got some time to assemble a paint rack, adding the illusion of organization.

 

  • Member since
    January 2006
  • From: NW Washington
Posted by dirkpitt77 on Tuesday, November 8, 2011 9:12 AM

    Decided to come back to this thread and leave a little teaser:  My "retreat" is getting a new coat of paint and laminate hardwood flooring!  Can't wait to get new pics and show it off here!  LOL   I stole the look from a couple of posts in this thread, so hope those guys don't mind.   ;)

 

 

   Chris

    "Some say the alien didn't die in the crash.  It survived and drank whiskey and played poker with the locals 'til the Texas Rangers caught wind of it and shot it dead."

  • Member since
    December 2010
  • From: Memphis TN
Posted by Heavens Eagle on Wednesday, November 9, 2011 10:49 PM

Well guys, being single I don't have to answer to anyone.  SmileYeah  Thus my back rooms (yes ROOMS) are both hobby/project/whatever rooms.

Room 1 has kit storage.  Found a 2 x 4 foot set of steel frame wood insert shelves at Home Depot for a good price.  Got everything off the floor. Then books and reference.  Watchmaker bench that I redid.  (Use this for the tiny stuff) Then the benches where I do the work.  The one against the wall ended up being where I tend to set tools.  Then the roll around table where I work on the kit.  Portable DVD player for watching movies etc. and more books etc.

Room 2 has the heavy duty stuff.  Puter, workbench with band saw (at the moment) Micro Mill (the handyest tool I ever bought)  Tool boxes (with TOOLS) and a drill press.

Currently building a new paint booth to extract the fumes and catch the dust. Then off to do some more kit building.  Should have most of the booth done this weekend.  Will have to wait for the fans and another part till they come in next week.  The fans are 12 vdc 120mm computer fans which are brushless.  Will have it set up to run 1 or both.  both runing should exhaust  about 100 CFM out the nearby window which I have an insert for.  No open window when it's raining or -20 outside!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.