Hardest Kit you made?

It sure growls!

It flys!

https://youtu.be/hB6mTt14NGY

For me the ICM TB-3 Zveno ...multiple butt jointed sub assemblies made alignment quite a challenge.2nd was the Contrail vac form HP-42 .It was worth the effort! 

RickS

My mother was having none of it.  The hard rule was, no new model until the previous one is finished. 

You will get a kick out of this:

https://theleansubmariner.com/2019/01/06/inconceivable-it-was-just-a-plastic-toy-anyone-could-buy-for-2-98/

Bill

Just came across this thread, and it brought back memories! When I was about 9 or 10, I found a submarine model - don't remember the brand, or specific sub other than it was a US nuclear sub.  it was a cutaway, with half the hull molded in clear.  I was so enthralled with all the little compartments and details, I simply HAD to have it. Mom and/or dad relented, and got it for me.  Well, at that age, the shine wore off rather quickly when I realized the time-consuming tedium of painting each and every one of those compartments, and the little things therein.  I started and stopped several times, wanting to move on to another less grueling model to build.  My mother was having none of it.  The hard rule was, no new model until the previous one is finished.  After what must have seemed to me to be years, I finally finished it, and thankfully moved on.  I do remember thinking, once it was all done, that it sure didn't look as impressive as I had hoped.  But that's the life of a young modeller I suppose.

I think the DML Me-262 was the hardest for me.  It was my first foray into PE (stainless steel PE is HARD to cut!) and the first time I built a model with exposed engines.  The DML kit is actually from Trimaster, and while it was pretty accurate, the fit was not the best, especially the lower wing joint at the fuselage and the forward engine fairing pieces.

The plumbing and wiring for the two Jumo 004B turbojets took me a month to research and implement.  But I did learn where everything goes and how it works.  For example, I learned that the exhaust nozzle "zwiebel" (onion) moved back and forth to control the aperture size, and that it was shaft driven by the accessory pack up front.  The engines were attached to the wing using just three bolts.

It was the most complicated model I had built up to that time, and though it was trying, I did learn from it.  I blame that kit for my PE seat belt addicition.

jeffpez

Heller's 1/100 Soleil Royal. I've had a love/hate relationship with it since 2012 and it still isn't fully rigged. In a moment of weakness I also started their Victory. It too languishes undone.

 

I agreed, The Heller Soleil Royal  took me 6 1/2 months working on it almost every day, and 3 different set of instruction, one in English, one in French, and one in Japanese. The English and Japanese direction were provided by the good folks of this forum.

Now I am working on a supposedly "beginners" wood model and I am pulling what is left of my  hair out.

Joe

So far the Rye Field Models Tiger 1 (Gruppe Fehrmann version).

Between the "workable" tracks and the PE tool holders this one kicked my big behind! It is still not really "done"!

the Baron

 

 

BrandonK

 

Teenage Modeler

For me, probably my P-47 from Tamiya. I have not built it yet, and won't plan to, 

This is one of the nicest kits out there. It practically builds itself. A true gem in the modeling world...

 

 

 

Second that, BrandonK!

Teenage Modeler, have no fear about that kit, and about Tamiya kits in general.  They are engineered very well.  So you'll get good practice with a Tamiya kit, because you don't have to fight the kit, but you can exercise your skills and build confidence.  Then you'll be ready when you pick up a truly difficult kit.

 

I second the Baron's sentiment about Tamiya's kits!  I recently completed their Spitfire Mk I for a facebook group build (the Plastic posse Podcast) and it assembled beautifully!

That P-47 is on my list of "must haves"!

I'd say the hardest kit to date, for me, has to be the Roden 1/72 Gotha Bomber!  the instructions were horrible, and the parts so teeny!  lol

Model Monkey

Any vacuform kit.  They have always defeated me.

Most challenging kit from a painting perspective for me has been the Polar Lights 1/350 scale refit USS Enterprise NCC-1701.  Achieving the subtle "Aztec" pattern is not for the faint of heart.  Aftermarket mask sets are a must.

Concur with praise for Tamiya's P-47.  It's a gem.  Every more recent 1/48 scale Tamiya kit I have owned is really well engineered making for easy, painless assembly.

 

That's why I plan on building my Enterprise in a gray green "experimental" lizard camouflage. Hey, it's Star Trek; anything can happen with enough plot armor! 

Any vacuform kit.  They have always defeated me.

Most challenging kit from a painting perspective for me has been the Polar Lights 1/350 scale refit USS Enterprise NCC-1701.  Achieving the subtle "Aztec" pattern is not for the faint of heart.  Aftermarket mask sets are a must.

Concur with praise for Tamiya's P-47.  It's a gem.  Every more recent 1/48 scale Tamiya kit I have owned is really well engineered making for easy, painless assembly.

Hardest because my skills weren't up to the kit:  Mirage Hobby PZL P.11c.  Lots of fiddly PE and also plastic bits; 

Hardest because it was also tedious:  Trumpeter LAV-III.  Lots of bits and the PE sowage baskets. Eduard Bf-110G with radar array.  Things like separate throttle levers and aligning and attaching the radar array.

Hardest because the kit was a bear:  Alanger Yak-9.  Lots of interior parts that need to fit together with NO locating pins, grooves, or anything of the sort to indicate how.  

Well, Let's See;

      I believe it was 1956, yeah that was the year. Birthday. Gramps gave me two car kits. Sub 1/25( 1/32?) 56 Chrysler and 56 Mercury-Revell.You know if you've paid attention. They had multiple piece Bodies. Yeah, they had interiors and engines But no window material.

       My first of their cars was a 1/25 FORD Country Squire Station Wagon. Same situation, but that one fit together great.( Only one I can remember that did on their American cars) That one I made windows for, out of wide cellophane tape glued together sticky side to sticky side carefully working out all the Bubbles. Made passable windows.

      Those I believe were the worst! I kept a Machete on the hook at the end of the bench!

Fonderies Minitures....

Short-run limitedproduction kits, plastic made of mopuldy cheese! 1 Win, 1 draw, one loose....

Glamdring

The old Revell Black Widow.  The horror.  The horror.

Other one was 1/35 AFV Club's Wiesel 1 TOW.  Who would have guessed such a small subject could give such big headaches.

We ought to do a group build of known poor kits and call it "Bad Dogs".

The Matchbox 1/72 Handley Page Heyford  (an inter-war biplane heavy bomber).  I bought this as something to occupy me whilst staying with relatives for a few months, when I was a teenager.  I got the fuselage & wings assembled individually, but bringing them together at the same time as fitting the struts proved beyond me, as I didn't have the three pairs of hands that seemed necessary.  It went in the bin & I've never been moved to try that one again.  

For me, the biggest PITA kit I've ever had is the Collect-Aire F-108 in 1/48 scale. 
My first and almost LAST resin kit.

(Confession; I bought the Anigrand F-108 in 1/72 but I'm not enthralled with it. Probably gonna end up scratch building the wings.)

wpwar11

What's needed for Lindberg models

 

ROFLMAO!!!!!

Haha! That always happens to me (Not always, but occasionally). 

Huh! good to know Baron! I will surely have fun with my P-47.

Teenage Modeler

 

 

wpwar11

 

 

 

What's the Magnum doing?

 

Its presence in my workshop discourages people from sitting in my chair, touching my tools, spilling paint, scratching my freshly painted projects, handling the completed models, or making wisecracks about me being too old to play with toys. Faster than explaining the rules, more effective than printing up a sign.

And it scares the hell out of the gremlins that live under my bench. That's always a plus.

Now I was in 4th grade, probably 9 years old, and one my aunt's gave the Monogram Wright Flyer to build.  Wow, was I impressed.   But skills were not there but boy was I impressed with models!  I still have not built one, or ever bought one.  The next one that comes to mind is the 1967 AMT kit of the old Starship USS Enterprise.  Yeah, I built it, in 1967 but boy the warp nacelles just were horrible to fit.  It looked like the USS Constellation  after it met the Doomsday machine.  I may have been in the 8th grade then.  (Just like the TV show, ha. No budget).  I have not recently had any issues, just walk away and cool down and it will work out.  Of course, I do mostly armor and planes.  By the way, I've done two of the Tauro A7V's, one won 1st place in a contest.  

Typical python, laying in wait...,.

wpwar11

What's needed for Lindberg models

 

What's the Magnum doing?

BrandonK

 

Teenage Modeler

For me, probably my P-47 from Tamiya. I have not built it yet, and won't plan to, 

This is one of the nicest kits out there. It practically builds itself. A true gem in the modeling world...

Second that, BrandonK!

Teenage Modeler, have no fear about that kit, and about Tamiya kits in general.  They are engineered very well.  So you'll get good practice with a Tamiya kit, because you don't have to fight the kit, but you can exercise your skills and build confidence.  Then you'll be ready when you pick up a truly difficult kit.

Tojo72

 

 

fotofrank

Tamiya P-38. So many fiddly parts. For me the kit is like restoring Glacier Girl: No end in sight. It's been sitting on my shelf of doom for about a year maybe half finished.

 

 

 

 

Really !!!! We've heard so many good reviews that it is one of the best engineered kit ever,just falls together, on and on,I'm shocked.

But thanks, I will have to think on this one.

 

Tojo, that's just me. Don't let my comment dissuade you from getting the kit and having a good time building it. Sometimes I get lazy and I want to do a build that goes together more quickly than the P-38 kit.