1/48 Chinook anybody?

Try ebay 

When you get to the end, pay attention to the direction of rotation of the forward and aft rotor heads... Many people get this wrong

J.H. Primm

I believe Italeri is supposed to re-issue their 1/48th CH-47D soon. Cybermodeler has been showing it as a re-issue for a couple of months.

 

I inquired with Italeri...they said "early 2018"...which could be Jan...or may...depending on what "early" means to them!

I have moved on and started on the 72nd kit.

I believe Italeri is supposed to re-issue their 1/48th CH-47D soon. Cybermodeler has been showing it as a re-issue for a couple of months.

route62

I know the seller, so if you change your mind let me know and I can get it for you.

 

I'll message the guy that's footin the bill for this project...will letchya know either way.

Thanks!

I know the seller, so if you change your mind let me know and I can get it for you.

route62

If you still are looking i found one at modelpalooza for $100.  I am volenteering so i will be here sun.  We can work out sending payment thru paypal and i can ship it to you

 

 

Thanks...sorry I missed this...was outta town for the weekend. I think that woulda been a bit over budget though!

If you still are looking i found one at modelpalooza for $100.  I am volenteering so i will be here sun.  We can work out sending payment thru paypal and i can ship it to you

here is some more http://www.squadron.com/1-48-Italeri-CH-47D-Chinook-IT2672-p/it2672.htm , http://www.anticsonline.co.uk/1854_1_105392389.html , https://www.rcjaz.com.au/italeri-2672-148-ch47d-chinook-p-90054815.html , http://www.norton.co.uk/plastic-kits-c146/aircraft-c538/1-48-2672-ch-47d-chinook-aircraft-kit-p456 most places seam to be out of stock you cold try waiting thats if you want 1/48 otherwise just go 1/72

i just found this link it could be of some help http://www.jumbliesmodels.com/model-kits-c3/aviation-kits-c4/italeri-ch-47d-chinook-148-scale-plastic-kit-p1198 but it is out of stock

crazypat

try checking https://www.bnamodelworld.com they have some and in 1/48 scale for around $67 AUD they might have what you want

 

They only have the "A" listed...and out of stock. Thanks though.

Going with the 1/72 Trumpy kit...got it in the other day.

fermis

Nevermind....got an email from them that basically said.."sorry kid, you're out of luck".

No joy on the 47C either, or the HC-1(which has the proper blades, for a D).

 

I wish that I had seen this about 7 hours ago... I was there and could have checked up to confirm... let's just say that the daytime staff I ran into today is not their A team for modelers... they are more or the gamers side of the shop...

Nevermind....got an email from them that basically said.."sorry kid, you're out of luck".

No joy on the 47C either, or the HC-1(which has the proper blades, for a D).

I guess I didn't hit my head on landing too many times... 

great to hear you found one... and helped support a local shop!

stikpusher

I could swear that one of my two LHSs had one in stock when I was there last month. But I can't remember which one.

here are the shops with their contact info if you want to call them and check for certain...

http://www.brookhursthobbies.com

 

 

good luck...

 

BA-BOOM....you are the man!

I got the "dust bin" filters through "Shapeways", the other day...3D printed. They look quite nice. Ordered the kit today.

Thanks Stik!

GMorrison

Yeah I had a 1/48 CH-46, in fact I think I gave it to you.

Thing was huge.

There was a forum member back when named Old Hooker.

 

Yes sir....one of these days....one...of...these...days!!!

Dunno that I'd call it huge...maybe petite, for big chopper!

I could swear that one of my two LHSs had one in stock when I was there last month. But I can't remember which one.

here are the shops with their contact info if you want to call them and check for certain...

http://www.brookhursthobbies.com

http://www.militaryhobbiesonline.com/main.sc

good luck...

Yeah I had a 1/48 CH-46, in fact I think I gave it to you.

Thing was huge.

There was a forum member back when named Old Hooker.

So, there is no joy to be had for finding this kit. I did find one that was actually available, on some site in the UK...for a mere $130+ USD...plus shipping. No thanks!

I contacted Italeri, and the kit is being repopped, and due in the US market early next year. 

Going with 1/72

CrashTestDummy

Peruse your local HobbyLobby to check their stock.  IIRC, the one near us had one for a while.  Then, wait for one of their killer '40% off' coupons and pounce!

 

Gene Beaird,
Pearland, Texas

 

I don't have one all that close (35-40 mins away), and given what their selection has been for the last decade or so, I highly, HIGHLY doubt that Hobby Lobby is going to be the place I'll find a kit that can't simply be found anywhere else.

Peruse your local HobbyLobby to check their stock.  IIRC, the one near us had one for a while.  Then, wait for one of their killer '40% off' coupons and pounce!

Gene Beaird,
Pearland, Texas

route62

checked my stash, sorry, no 1/48 chinook.  I do have 1/72 CH113 and a CH-46D. Same family of chopper if you do not have any luck anywhere else.

 

Thanks for checking...appreciated!

I have a 46 that I built for another very good friend of mine that was also a crew chief on the Phrog (he's now "chiefing" the V-22). 

I still can't believe that there is not a 47D to be had. I thought the "dust bin" intake filters would have been harder to track down...those were a piece of cake...and ordered.

I have found 47D kits in 1/700, 1/350, 1/144(all way too small!), 1/72 and 1/35...but have not found the "dust bin" filters in 72nd or 35th....only in 144th and 48th.

I did contact Italeri...but being Sunday, I'll hafta wait.

checked my stash, sorry, no 1/48 chinook.  I do have 1/72 CH113 and a CH-46D. Same family of chopper if you do not have any luck anywhere else.

GMorrison

Yes it means a lot...

fuggeddaboutit...

 

That's really what I meant!!!

What I'm finding is...Italeri is the only game in town...Revell reboxed it as the British HC-somethin or other...but it's basically a C model.

It kinda amazes me that there's not a few options (several companies) readily available. As far as I'm concerned, the Chinook is an icon of helicoptery...not quite up there with the Huey, but not all that far behind!

Yes it means a lot...

fuggeddaboutit...

I know the 1/35 and 1/72 are available all day long. I never thought a 1/48 Chinook would be a hard to find item. Squadron may be the only route to go...I have their "20% off your order" email, for this weekend.

If they actually have it. I found it through google images....but when I was on Squdron, nothing came up through their "search".

Edit...found the Squadron one again...."in stock soon"...which doesn't mean much.