SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Revell 1/48 Ju-87B-2 Stuka

6750 views
15 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2009
  • From: Endicott, Va.
Revell 1/48 Ju-87B-2 Stuka
Posted by Bomber Boy on Thursday, February 24, 2011 11:28 AM

 

I didn't take any build-up photos of this craft as it is pretty much straight out of the box. The figure is from Verlinden. The paint scheme is different

from what is shown in the directions, I just Love those Yellow noses, and tails, although the letters are from the kit planes of this groupe did fly the yellow nose as is done on this model. All of the other letters are correct for this plane except the Blue "B", and I just didn't want to buy a new set just for a "B". 

 

All in all it was a pretty easy build no major warping or pin divots. I used MM enamel 70/71/65 but darkened the 71 some as I thought it too bright as per the photos I referenced. I coated with Future before decaling and after, then Flat coated with Testors.

 

Enjoy!!!

James

Thanks For Looking!!

 

James Herndon II __-_-_/"\_-_-__

Endicott ,Va

beandawgartworks.com

  • Member since
    February 2007
  • From: Brunswick, Ohio
Posted by Buckeye on Thursday, February 24, 2011 11:31 AM

Very nice!Yes

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Thursday, February 24, 2011 9:19 PM

Nice build James. Toast She really looks "War Weary". Good job on the figure too.

Jim Captain

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    March 2010
  • From: Democratic Peoples Republic of Illinois
Posted by Hercmech on Thursday, February 24, 2011 10:27 PM

James,

 Looks great! Your weathering is spot on. What technique did you use around the nose cowl? I remember doing this kit when I was a kid and have been tempted several times to pickit up again. seeing how well your kit came out I may have to give into the urge.


13151015

  • Member since
    February 2003
  • From: A Spartan in the Wolverine State
Posted by rjkplasticmod on Friday, February 25, 2011 8:31 AM

Nicely done James .  Thanks for sharing.

Regards,  Rick

RICK At My Age, I've Seen It All, Done It All, But I Don't Remember It All...
  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Friday, February 25, 2011 10:00 AM

Very nice James great weathering Toast, I almost picked that kit up the other day, now I will.Wink  Did the kit come with the pilot in motion?

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

  • Member since
    January 2006
  • From: Sarasota, FL
Posted by RedCorvette on Friday, February 25, 2011 10:07 AM

Looks terrific.  Very nice work!

Mark

FSM Charter Subscriber

  • Member since
    December 2009
  • From: Endicott, Va.
Posted by Bomber Boy on Friday, February 25, 2011 10:39 AM

Hercmech

James,

 Looks great! Your weathering is spot on. What technique did you use around the nose cowl? I remember doing this kit when I was a kid and have been tempted several times to pickit up again. seeing how well your kit came out I may have to give into the urge.

Hey Guys, I usually have a reference Photo with my work but forgot to put one here, That will be rectified now.

Hercmech, I just turned down my pressure and sprayed a gloss black in the areas of the powder blowback and around the cowl where the panels meet and are removed as the prop force would blow oil and crud out. add a little silver here ad there to simulate worn and blown off paint.

Reasoned, The figure is from Verlinden. 

So now the reference photo,

James Herndon II __-_-_/"\_-_-__

Endicott ,Va

beandawgartworks.com

  • Member since
    March 2010
  • From: Democratic Peoples Republic of Illinois
Posted by Hercmech on Saturday, February 26, 2011 11:42 AM

"Just add a bit of silver here and there"

You make it sound so easy. Kinda like an old guy I kenw that when asked how he carved such intricate carvings he said' Easy I just take off the parts that dont look like (fill in the blank)"

 

Looks good though thanks for sharing. You guys are causing my stash to grow.


13151015

  • Member since
    December 2009
  • From: Endicott, Va.
Posted by Bomber Boy on Saturday, February 26, 2011 11:50 AM

Hercmech

"Just add a bit of silver here and there"

You make it sound so easy. Kinda like an old guy I kenw that when asked how he carved such intricate carvings he said' Easy I just take off the parts that dont look like (fill in the blank)"

 

Looks good though thanks for sharing. You guys are causing my stash to grow.

Hercmech, I just use a very dry brush technic and push on the brush pretty hard to fan it out in all directions, I tey to start at what I think is the center of the wear, so it gets the most paint and kinda spiral out from there and it gets less and softer as you go. Just keep in mind that it is a dabbing method not just a place and move. Hopefully this will help more. Also make sure you have the proper color laid before you start this process.

James

James Herndon II __-_-_/"\_-_-__

Endicott ,Va

beandawgartworks.com

  • Member since
    December 2009
  • From: Endicott, Va.
Posted by Bomber Boy on Sunday, February 27, 2011 9:45 AM

fox

Nice build James. Toast She really looks "War Weary". Good job on the figure too.

Jim Captain

Thought I'd give ya'll a closer look at the figure, and there will be more figures when I get the base done, more photos to come.

James

James Herndon II __-_-_/"\_-_-__

Endicott ,Va

beandawgartworks.com

  • Member since
    December 2009
  • From: Endicott, Va.
Posted by Bomber Boy on Sunday, February 27, 2011 9:45 AM

fox

Nice build James. Toast She really looks "War Weary". Good job on the figure too.

Jim Captain

Thought I'd give ya'll a closer look at the figure, and there will be more figures when I get the base done, more photos to come.

James

James Herndon II __-_-_/"\_-_-__

Endicott ,Va

beandawgartworks.com

  • Member since
    March 2009
Posted by coogrfan on Sunday, February 27, 2011 12:22 PM

Superb.

  • Member since
    August 2009
  • From: Borlando Fla home of the rat
Posted by TREYZX10R on Sunday, February 27, 2011 12:39 PM

Great looking build James the weathering is awesome! I just picked this kit up on sale at hobby lobby  now you've got me motivated to start itYes

  • Member since
    April 2015
Posted by spadx111 on Monday, February 28, 2011 12:54 PM

Yes Nice job.Ron

  • Member since
    February 2011
  • From: Bent River, IA
Posted by Reasoned on Tuesday, March 1, 2011 12:46 PM

TREYZX10R

Great looking build James the weathering is awesome! I just picked this kit up on sale at hobby lobby  now you've got me motivated to start itYes

Yeah, my favorite LHS is going out of business and had this on sale for $8.00, so picked this up too.  Looks like it will have to sit in the stash..... for now.

Science is the pursiut of knowledge, faith is the pursuit of wisdom.  Peace be with you.

On the Tarmac: 1/48 Revell P-38

In the Hanger: A bunch of kits

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.