SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Wildcat Done

2977 views
32 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2003
  • From: Everett, WA
Wildcat Done
Posted by gwaihir on Tuesday, January 27, 2004 1:53 PM
Well I am pretty new to the modeling scene. I have put a lot of work into this one and was hoping for some feedback. I am anxious to learn, so nothing will hurt my feelings - it will only help me. One question I do have is: other than sanding them flat, does anyone have advice on making the tires look like there are bearing some weight without having to buy aftermarket?

Thanks for any help/comments.



Click the banner to see my builds.
  • Member since
    January 2003
Posted by Jeff Herne on Tuesday, January 27, 2004 2:01 PM
Depending on the tire...I've sometimes taken the tire and, using a piece of brass rod for the gear strut, pressed it against the bottom of a pan full of boiling water. Sometimes it works, sometimes it doesn't.

You can flat-spot the tire, then add some filler putty to the sidewalls to replicate the bulge. Let it harden, then shape it with wet-or-dry paper.

Jeff Herne

PS: Very nice F4F, those panel lines look great. The presentation is very nicely done with the carrier deck as well...wow...it's taken me a long time to get where you are just starting out...
  • Member since
    December 2003
  • From: Waxhaw, NC
Posted by danok2 on Tuesday, January 27, 2004 2:01 PM
Whoa! Outstanding (IMHO)! I only hope my first serious efforts are that good!
"Ahh, the Luftwaffe. The Washington Generals of the History Channel."-Homer Simpson
  • Member since
    May 2003
  • From: The flat lands of the Southeast
Posted by styrene on Tuesday, January 27, 2004 2:15 PM
Nice looking 'cat! Wish my first efforts looked that good...

Gip Winecoff

1882: "God is dead"--F. Nietzsche

1900: "Nietzsche is dead"--God

  • Member since
    December 2002
  • From: A secret workshop somewhere in England
Posted by TANGO 1 on Tuesday, January 27, 2004 2:15 PM
Your wildcat looks great! Suberb paint-job and very nicely presented. When I modify my tyres I just file a flat spot and see how the aircraft "sits". If I need to add a bit of a bulge I just add a little filler to the side-walls.

Well done and thanks for sharing,


Darren.
Regards, Darren. C.A.G. FAA/USNFAW GB
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 27, 2004 2:36 PM
Hey, I'd like to see the pix... did I miss something or is there a problem with my computer?Confused [%-)]
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 27, 2004 4:11 PM
Very fine Wildcat, well done indeed.
  • Member since
    February 2003
  • From: Sandusky Ohio, USA
Posted by Swanny on Tuesday, January 27, 2004 4:14 PM
An excellent job. You are already building like a pro.
  • Member since
    September 2011
Posted by fightnjoe on Tuesday, January 27, 2004 5:06 PM
nicely done

Veterans,

Thank You For Your Sacrifices,

Never To Be Forgotten

Where you can find me:

Workbench on FaceBook  Google Plus  YouTube

  • Member since
    September 2003
  • From: USA
Posted by plheure on Tuesday, January 27, 2004 5:20 PM
Very nicely done, newtothegame. I have things I can learn from you.
  • Member since
    February 2003
  • From: Niagara Falls NY
Posted by Butz on Tuesday, January 27, 2004 5:31 PM
Hey,
WOW, for being new to modeling you sure did an awesome job on the CatWink [;)].
I have a few of my first builds that I did when I started out bout 22yrs ago and they did not look as good as your does. I give ya twoThumbs Up [tup]Thumbs Up [tup] my friend.
In particular I like the way you applied the weathering to her. How ever you did it, it does it justice. I just noticed the different shade of colour on the ailerons. NICE.
I take it that thats the 48th Tamiya kit right?. As for your question about the tires, this is me now, I would basically leave them alone. If I were to sand the bottom of the tires I would do it ever so lightly.
In all the referencing that I have done, I have not really seen any tires that had a "weight look" to them. Well maybe a slight buldge but not "almost going flat" look.
But hey its all up to the modeler(you) and its how you want to represent your build.
Again great build and I'm lookin forward to your future posts/builds.
If you have any questions please feel free to ask away here or if ya want feel free to e-amil me at Falcon42177@yahoo.com or Falcon174th@aol.com
Flaps up, Mike

  If you would listen to everybody about the inaccuracies, most of the kits on your shelf would not have been built Too Close For Guns, Switching To Finger

  • Member since
    March 2003
  • From: Newport News VA
Posted by Buddho on Tuesday, January 27, 2004 5:42 PM
Great looking Wildcat, Newtothegame...

Your painting and presentation skills are very good, and can only get better!

Regards, Dan

  • Member since
    December 2002
  • From: Winsted CT
Posted by jimz66 on Tuesday, January 27, 2004 6:05 PM
Nice looking Wildcat. First rate.
Phantoms rule the skies!!!
  • Member since
    April 2014
Posted by r13b20 on Tuesday, January 27, 2004 6:16 PM
Excellent! Looks very real! I just wish I were that good!
  • Member since
    January 2003
  • From: Central MI
Posted by therriman on Tuesday, January 27, 2004 6:20 PM
Very nice. One of my favorite planes.Big Smile [:D] Great job on the weathering and the panel lines.
Tim H. "If your alone and you meet a Zero, run like hell. Your outnumbered" Capt Joe Foss, Guadalcanal 1942 Real Trucks have 18 wheels. Anything less is just a Toy! I am in shape. Hey, Round is a shape! Reality is a concept not yet proven.
  • Member since
    July 2003
  • From: Lower Alabama
Posted by saltydog on Tuesday, January 27, 2004 6:25 PM
that wildcat looks wonderful. keep sharing.
Chris The Origins of Murphy's Law: "In the begginning there was nothing, and it exploded."!!! _________ chris
  • Member since
    January 2003
  • From: NE Georgia
Posted by Keyworth on Tuesday, January 27, 2004 6:45 PM
First class job on the Wildcat. You should be proud of that one.
"There's no problem that can't be solved with a suitable application of high explosives"
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 27, 2004 7:09 PM
Very nice looking Wildcat !

I saw an article in FSM once, where the modeler pressed the tire onto a clothes iron, set at the lowest heat. I've never tried it, but his looked great. I would experiment first on spares, though. Its the only method of which I've heard, other than sanding.

Good luck ! Looking forward to the next build.
  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Tuesday, January 27, 2004 8:24 PM
I echo the other's comments, that is some very nice work. Thumbs Up [tup]Thumbs Up [tup]Thumbs Up [tup]

Mike

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    December 2002
  • From: Pominville, NY
Posted by BlackWolf3945 on Tuesday, January 27, 2004 8:41 PM
Now THAT is a nice lookin' build. Keep 'em coming, guy. Despite what you say, looks to me that you have little to learn!


Fade to Black...
  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Tuesday, January 27, 2004 8:51 PM
Very nice, for someone who is new you are building like someone who has been doing it for years great job.. JOHN
For the amount of trouble it takes for bulging the tires. Buy aftermarket they are only $2 or $3 a pair and they look great

 

  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 27, 2004 8:59 PM
newtothegame, I could see them this time. Don't know what happend before. That is a great looking model! The weathering turned out great! I especially like the smoke stains above and below the guns!
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 27, 2004 9:13 PM
Wow. Just... Wow. That is one awsome looking cat! Good job. Since I've gotten back into modeling recently I have yet to have a build look that decent. Again, good job.
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 27, 2004 9:33 PM
WOW, hope I can build anything half as good as that!!!!
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 27, 2004 9:47 PM
Nicely done wildcat. I am a new modeler and they dont look as good as that
  • Member since
    October 2003
  • From: Everett, WA
Posted by gwaihir on Tuesday, January 27, 2004 10:03 PM
Wow. Thank you everyone for the replies so far. I am, admitedly, very proud of this one. It has taken tons of time and had a few problems, but for the most part (atleast to my knowledge) gone really well.

As for the few skills I have developed up this point...they have all been stolen :) from sites like this, armorama.com, aircraftresourcecenter, etc. Without all the helpful advice/topics on these sites it would be years and years until I could get something that I would even be close to being proud of. The people I really respect are those who had to gain all of their modeling skills without the internet! I can't even imagine it...

Anyway. Thanks. I'll probably try the sanding tomorrow night.

Again any thing you see lacking let me know.
Click the banner to see my builds.
  • Member since
    July 2003
  • From: Lower Alabama
Posted by saltydog on Tuesday, January 27, 2004 10:09 PM
the only thing i can see that is lacking is more pics of your work. cough em' up man. you do very good work my friend, keep it up. later.
Chris The Origins of Murphy's Law: "In the begginning there was nothing, and it exploded."!!! _________ chris
  • Member since
    December 2002
  • From: United Kingdom / Belgium
Posted by djmodels1999 on Wednesday, January 28, 2004 1:31 AM
Wow! That's real nice!
  • Member since
    November 2005
Posted by Anonymous on Wednesday, January 28, 2004 1:37 AM
New-to-the-game? I think you're pulling our legs! That looks very nice, great job!
  • Member since
    July 2003
  • From: Kent, England
Posted by nmayhew on Wednesday, January 28, 2004 1:42 AM
newtothegame, you gotta be kidding, right?![:0]Tongue [:P]Smile [:)]
that bird looks awesome!!Bow [bow]
regarding wheels, i think it varied from plane to plane and according to theatre (that's "theater" if you're stateside i believe?Tongue [:P])...just take a look at planes based on desert airfields etc, they look almost flat!
as to where to what brand to use, i think true details make some great weighted resin wheels; i use them a lot.
thanks for sharing the pics. hope to see some more soon.Smile [:)]
regards,
nick
Kind regards, Nicholas
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.