SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/48 Revell TBF Avenger

13063 views
30 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2012
1/48 Revell TBF Avenger
Posted by DJinFlorida on Friday, January 11, 2013 9:12 PM

I am starting the last model in my stash, the Revell 1/48 TBF Avenger. 

So far, all I have done is the canopies, and a little wind incident created the need for a little clean up on them.

I'm not sure how much time I will have to work on it, so it may take a while to get it finished.  I'll do my best to post more pics as I get them.

Thanks for stopping by for a look!

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    July 2012
Posted by DJinFlorida on Monday, January 21, 2013 9:34 PM

I don't have much to show this weekend, but I did finish the pilot.

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    November 2003
  • From: State of Mississippi. State motto: Virtute et armis (By valor and arms)
Posted by mississippivol on Monday, January 21, 2013 9:36 PM

Good job tackling the hardest part first. Are you building the three-tone version or the overall dark blue?

Glenn

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Monday, January 21, 2013 10:27 PM

Won't be the last kit in the stash for very long if you're like me...

 

 

  • Member since
    March 2004
  • From: Spartanburg, SC
Posted by subfixer on Tuesday, January 22, 2013 8:33 AM

It looks like you missed painting the horizontal bar between the two small ovals on the the left side of the turret. Painting that thing is tough, isn't it?

I'm from the government and I'm here to help.

  • Member since
    December 2011
  • From: AZ
Posted by Luft Modeler on Tuesday, January 22, 2013 11:01 AM

Great job on the canopy, noticed on the last picture there the part between the two ovals should be painted too.

  • Member since
    December 2011
  • From: AZ
Posted by Luft Modeler on Tuesday, January 22, 2013 11:07 AM

Here is mine showing that part:

  • Member since
    February 2007
  • From: Brunswick, Ohio
Posted by Buckeye on Tuesday, January 22, 2013 11:40 AM

Off to a great start.

Mike

  • Member since
    January 2006
  • From: Sarasota, FL
Posted by RedCorvette on Tuesday, January 22, 2013 11:50 AM

One of my all-time favorite kits.  :)

Mark

FSM Charter Subscriber

  • Member since
    July 2012
Posted by DJinFlorida on Tuesday, January 22, 2013 1:48 PM

Thanks for all of the replies!  Yes, it does appear that I missed the bar between the ovals.  

I tried a new technique where I masked the whole part and cut out what needed to be painted.  It did seem easier than cutting a whole bunch of small pieces of tape and making them fit.  Especially one with this many panels.  However, it was hard to see all of the frame, and I missed one.  At least it will be a nice easy straight piece.

@Glenn: I am doing the tri-color scheme, the one that was flown by President Bush.

@pzl66: That's one nice looking Avenger.

@Nathan: Unfortunately, our budget has taken another hit.  I've got a side business starting, but until it is up and running, my modeling budget is stuck on $0.  And what really hurts is that my wife expressed interest in building one.  

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    March 2009
  • From: Yorkville, IL
Posted by wolfhammer1 on Tuesday, January 22, 2013 9:38 PM

Sorry to hear about your wife.  I think most modelors would give a chunk of anatomy to get their significant other interested in the hobby.  Have you checked Craig's list or its local equivalent?  You might be able to find something there very reasonable.  Good luck, and I hope your wife is patient enough to wait until you can get something else going.

  • Member since
    July 2012
Posted by DJinFlorida on Friday, January 25, 2013 11:05 PM

Fixed the turret canopy.

I should be able to get some work done on it tomorrow and I will post some more pics.

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    July 2012
Posted by DJinFlorida on Friday, February 1, 2013 6:46 PM

The fuselage is put together.  It needs some cleaning up, but nothing a little putty can't handle.

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    August 2009
  • From: Borlando Fla home of the rat
Posted by TREYZX10R on Saturday, February 2, 2013 2:53 PM

Looking great DJ!

  • Member since
    July 2012
Posted by DJinFlorida on Monday, July 22, 2013 3:16 PM

Wow, it's been almost 6 months since I got any work done on this one.  I did get the tail gunner painted yesterday.  

I'm not sure how much more I'll be able to get done this week, but I am hoping to get the top and bototm of the plane painted at some point.  I may even get to the wings this weekend.

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    November 2010
  • From: Florida-West Central
Posted by Eagle90 on Monday, July 22, 2013 6:55 PM

DJ, great work.  The canopy work is awesome!  And the figures turned out great!  How is the side business coming?

Eagle90

 

  • Member since
    July 2012
Posted by DJinFlorida on Monday, July 22, 2013 7:56 PM

It's coming along slowly.  I've been getting a bit of side work lately, which is great, but it cuts into my bench time.

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    July 2012
Posted by DJinFlorida on Monday, July 22, 2013 8:01 PM

Sorry Eagle, I didn't read that right.  The side business is going great right now.  That's why I haven't had much bench time.  And apparently not enough time to read posts correctly.  Embarrassed

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    November 2010
  • From: Florida-West Central
Posted by Eagle90 on Monday, July 22, 2013 8:05 PM

I understand DJ.  No worries.  Where in Fla are you?  I was born and raised just outside of Tampa (Brandon).  Live in Vermont now!

Eagle90

 

  • Member since
    July 2012
Posted by DJinFlorida on Monday, July 22, 2013 8:11 PM

Right now I'm a little south of Jacksonville on the St. John's River.  Tampa to Vermont is quite a change.  How are you dealing with the winters?

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    November 2010
  • From: Florida-West Central
Posted by Eagle90 on Monday, July 22, 2013 8:23 PM

DJinFlorida

Right now I'm a little south of Jacksonville on the St. John's River.  Tampa to Vermont is quite a change.  How are you dealing with the winters?

My dad was born and raised in Fernandina Beach! My mom still lives in Brandon, and my sister is in Apollo Beach.  We go down about twice a year (or at least try to!).

Actually, I like the cold better than the hot!  I look back and have no idea how I ever drove to school during high school in a '73 beetle with no air conditioning!  Now, anything above 70 and I start to feel it!

With the side business going well, have you been able to get your stash going again?

Eagle90

 

  • Member since
    July 2012
Posted by DJinFlorida on Monday, July 22, 2013 8:33 PM

I'm just the opposite.  I grew up in Wisconsin.  I much prefer the heat to the cold.  We are currently driving a car without AC.  

So far, most of my business income goes into business expenses, but that should change pretty soon.  Then we have some expenses (like the car's AC) that need to get taken care of.  Then I'll be able to add to the stash.  

We did have a kind soul send a few models to us when he found out that I was not able to add to my stash.  Now I'm just trying to find the time to teach my wife how to build models.  My wife daughter and I each have one on the bench, although they haven't started theirs.  I also now have one in the stash.

That should keep me busy for the foreseeable future.

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    November 2010
  • From: Florida-West Central
Posted by Eagle90 on Monday, July 22, 2013 8:43 PM

That's too funny!  I don't like the heat now and you love the heat!  

Having your wife and daughter enjoying the hobby with you is awesome!  That is nice.  Makes it easy during birthdays and holidays!

Good to hear the business is doing well too.  In this economy, it's good to see that.

Eagle90

 

  • Member since
    July 2012
Posted by DJinFlorida on Sunday, August 11, 2013 10:23 PM

Got some more paint done. 

Next up is to finish painting the bottom pieces and assemble them.

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    November 2010
  • From: Florida-West Central
Posted by Eagle90 on Monday, August 12, 2013 8:12 AM

Looking good DJ!  

Eagle90

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, August 12, 2013 8:34 AM

Yeah, looks great DJ! I hate painting those three colour schemes but you've done a great job there. And good to hear the side business is doing well, too many empty store-fronts around here.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    July 2012
Posted by DJinFlorida on Wednesday, January 1, 2014 4:28 PM

It has been a while since I was able to get some work done, but I am ready for some decals.  

I need to pick up some white paint to finish up a few items, and then get the decals on.  It had been a rough year and I did not do such a good job on this one.  I am just going to finish it and move on to the next one.  I'm happy to get some bench time for the first time in a long time.

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    December 2002
Posted by 7474 on Wednesday, January 1, 2014 10:53 PM

Looking good there. I'm in Gainesville

  • Member since
    December 2013
Posted by Polo_Sal on Friday, January 31, 2014 9:12 AM

That does look really good. I attempted to build one of these, but for some reason I had a lot of trouble with the build.  I could not get the wings to glue correctly and the body seemed to be a little out of place. I had to glue the two pieces together 3 times in order for all the seam lines to stay together. As for painting, I don't have an air brush so I had to go with brushes. I have discovered that will take a while and doesn't have the same look all around.

It was my 4th attempt at building, so I just stoped working on it. I might come back to it and finish it. Maybe later as I improve my skills, I can make look at least half way as good as yours.

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Friday, January 31, 2014 9:23 AM

Nicely done. My father is in Lakeland. Just visited a few weeks ago. I may have to transfer down. I'm sick of cold and snow. I'm from Connecticut the tax you to death state.  John

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.