Another fit problem. Tab A(wing) will not fit into slot B(fuselage). The wing tab is a least 1/32 to thick to fit into fuselage. Not even going to use my mini-file and going with my wood file.

And have decided to just glue flaps into place like the rudder. The way the parts are designed they really don't move, they just sort of wiggle.

I have counted at least a dozen sink marks so I will just be putty/ sanding/repeat all weekend. Supposed to rain all anyway.

BrynnWryttur

Bro, you're acing this kit. It's looking nice I wonder if you put the warped fuselage in hot water if you'd be able to flex it back into shape?

 

...And the cockpit in the fuselage. This is the bad side and it to will require some putty and sanding.

Here are the antennae. They looked bad(flash, detail) and seriously thought beforehand with scratch-building my own. Fate made the decision for me while holding the antenna and reaching for tweezers.

The wings actually fit quite nicely. And they do fold! The flaps move very little and the pins are quite small and apparently brittle, hence the one in the righthand corner.

Floats.

Thanks, Toshi! Coming from you, that means alot.

My floats have a major fit issue so I tried using a dremel to grind them down. It did not solve the problem so I just cut them off with the razor saw. They still do not line up as well as you would like. More putty and sanding. The raise rivets are slowly disappearing and not by design.

It looks to me you’ve got everything incluugding the octopus under control!

Your friend, Toshi

stikpusher

The Ventura is nice! That’s a great diversion from your current challenge. As far as the cockpit goes, I was planning to use a salvaged Val cockpit on my Jake project whenever I get around to it. Anything has got to be better than what comes with the kit...

 

I picked the Ventura up for a great price of $22(shipping included) and I've heard it comes together nicely for it's age. I doubt I try the Octopus decal, I guess it can be daunting.

Here's the "finished" cockpit. Did a quick dryfit and it is not the greatest, as I split the fuselage trying to make it fit. The glass will hide alot of my cockpit flaws because it is thick(like a Lego block) and has some scratches. It was not packaged separately with the rest of the sprues. 

Finished the cockpit. I had to cut out the bottom of their "Tub" and make my own. I used salvaged old parts out of the junkyard. B17 seats, P38 radio, and I think a P51 IP and joy stick. Didn't turn out great but is better than what came with the kit. Please do not ding me for historic accuracy either...not alot of info.

The Ventura is nice! That’s a great diversion from your current challenge. As far as the cockpit goes, I was planning to use a salvaged Val cockpit on my Jake project whenever I get around to it. Anything has got to be better than what comes with the kit...

...But on my porch I found this, so all things considered a good day of modelling!

Last night on the fuselage, I did all of the usual tricks on it to try an straighten it out. They worked a little but still ended up gluing it one section at a time. The seams are not great but for someone who has built mostly Revellogram airplanes just another day at the office. Some pretty big sinkhole needed filled. Tomorrow the wings, hopefully.

Well, RealG, here are the pieces of the "elaborate pilot pit". This kit has the saddest, most pathetic excuse for a cockpit. And those are strong words from me who builds nothing but sad, patheticexcuses of models. I guess I have 3 options.

1. Build as is even though I have never painted figures...And they so small.

2. Scratch build a whole new cockpit.

3. No AM for this model but saw review where a Val Bomber could fit with a little help.

   Any Ideas? Highly open to suggestions.

Yes, a new tool kit of this aircraft by Tamigawa would be great...

I had the Nichimo boxing.  "Pilot pit is very eloborate", or something like that, was on the box side.  The cockpit is just a shallow tray to make space for the the battery pack to run the electric motor for the prop.  Yep, loved those folding wings!  Base-u boru size ribbets too!  Or were they more like ping-u pong-u saizu?

It's a primitive beast of a kit, but I have seen nice builds come from it.

Hasegawa-san, please give us a new kit of this rather important aicraft type.

DasBeav

 

 

stikpusher

Looks about the same as the Nichimo 1/48 kit...

 

 

 

 

Stik, I did some research and it is the same kit. Marusan made the kit from 1963 to 1967. Financial woes led to a U.S. company called UPC to import them for a couple of years. Nichimo apparently bought the molds and released it as a "NewTool" in mid 70s. They lied, Swannys model did a review and the pictures of the sprues are excactly like Marusan! But somehow it went from 1/50 scale to 1/48th....MAGIC!

 

 

Very interesting...

Awesome! I saw where you posted this on Tojo's 'Latest Purchases' thread and was hoping you'd build and post her. A WiP is even better!!! 

I've tried building a few of these ancient Japanese kits and though lacking detail they seem to fit pretty well. Except for those insanly warped fusilage halves. Good luck with that, I have no idea how to correct it. 

stikpusher

Looks about the same as the Nichimo 1/48 kit...

 

jeaton01

Should be a fun build.  Do I see an operating wing fold on the instructions?

 

Yes it dose !

Looks about the same as the Nichimo 1/48 kit...

stikpusher

Paste... warps... questionable decals... what scale is this?

 

Paste... warps... questionable decals... what scale is this?

....And the first minor issue. Warped and slightly twisted.

Should be a fun build.  Do I see an operating wing fold on the instructions?

Is 50 year old glue still good?

At first glance, there is some "flash" and the decals are sketchy.