SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

On its way.... HB 1/18 Me 262

1836 views
20 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2004
On its way.... HB 1/18 Me 262
Posted by snapdragonxxx on Saturday, October 17, 2020 10:50 AM

Yes, Finally it will be with me in a couple of days.

 

 

Yup! The 1/18 Me 262.

 

I have not made any building plans as yet apart from the decision to do a Luft '46 2 tone Afrika Korps splinter pattern aircraft just as something different.

Really this is very much a basic build and it will be the paint job and physical size that needs to impress. I will be going with custom paint masks, but need to measure the decals in the kit first before going to Maketar to order. I have also aproached HGW to see if they will upscale their 1/32 ME 262 water transfer set for me and I think that I will just go with 1/24 Luftwaffe seatbelts from them. Might be a bit undersized, but better than nothing.

Last night I had a bit of madness with some spoons, paints and my airbrush.

Here's my paint results, thinking about what is available from the Luftwaffe paint list and also the Afrika Korps RAL paints.

My first choice is on the left. RLM 79 Sand RLM 81 Brown Violet RLM 78 Blue. The other paints are the Afrika Korps Vehicle paint.

 

 

RLM 78/79 are the Luftwaffe desert paints so those are the base ones and RLM 81 Brown-Violet used on late war Luftwaffe European Theatre. This is I personally think the right one for the two tone splinter scheme for the upper surface as it will give a definite shade divide.

However, using the Afrika Korps would be a bit more subtle with the splinter pattern, so I am throwing it open to reasoned arguments and discussion so readers, pile in with what you think. Nobody will be Chastised, laughed at or anything else. It is always good to get other peoples take.

I am also open to imprevements and seatbelts are a sticking point with this. Ideas or alternative products are welcome as well as other forms of detailing. Usually Eduard and HGW are my go to places, but there's nothing for this scale out there. So, Come on, guys and gals, lets have some flashes of inspiration!

 

 

James

  • Member since
    June 2017
  • From: Winter Park, FL
Posted by fotofrank on Saturday, October 17, 2020 11:19 AM

For some reason Pretty Boy from Red Tails comes to mind, although with your camouflage pattern and colors rather than a lozenge type camoflage pattern but still with the yellow nose. Just a thought.

OK. In the stash: Way too much to build in one lifetime...

  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Posted by goldhammer on Saturday, October 17, 2020 12:51 PM

For big scale belts, maybe check at a fabric/sewing store. Buckles might have to be scratched

I work at an auto body shop and got a part in that was wrapped in an embossed bag that looks like a woven belt. Saved it for future use.  Can send you some if you want to see or try it. Just pm address.

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Saturday, October 17, 2020 1:32 PM

This will be fun to watch.  Going to need a special shelf!

Thanks,

John

  • Member since
    November 2004
Posted by snapdragonxxx on Saturday, October 17, 2020 5:12 PM

Need to finish the 1/32 B-17 first I think!!!!

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Saturday, October 17, 2020 6:22 PM
Too big for me,probably too costly and no room.

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Saturday, October 17, 2020 7:36 PM

keavdog
Going to need a special shelf!

Probably more like a custom hangar, if only to keep the dust off Smile

Hmm, my calculator is rendering 23.16666" long by 27.555" wide  So, you probably need a 30x30" base at a minimum, probably 42x42 if revetments.  And that's a big honking chunck of camo netting, too.

  • Member since
    November 2004
Posted by snapdragonxxx on Sunday, October 18, 2020 4:41 AM

For those wondering....

Length: 590mm   Wingspan: 680mm

For Americans...

Length 23.2283  Wingspan 26.7717

Cool

  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in central North Carolina.
Posted by disastermaster on Sunday, October 18, 2020 8:38 AM

Tojo72

probably too costly and no room.

 

 
With tax and shipping, just short of $200.00.
Not to mention hangar rent.

 https://i.imgur.com/LjRRaV1.png

 

 

 
  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Sunday, October 18, 2020 9:36 AM

Didn't 21st Century Toys have an Me-262 in their 1/18th catalog?

The bigger the government, the smaller the citizen.

 

 

  • Member since
    November 2004
Posted by snapdragonxxx on Sunday, October 18, 2020 1:55 PM

This is the reboxed Merit one.

Just wondering if a OOB build with a good paint job will do, or should I take it further.

Would need pic references for gun bay and wheelbay. or I might use Eduards Trumpeter update sets instructions as reference.

I will put up kit sprues ASAP and any input and ideas would be helpful!

  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in central North Carolina.
Posted by disastermaster on Monday, October 19, 2020 10:49 AM

snapdragonxxx

This is the reboxed Merit one.

Just wondering if a OOB build with a good paint job will do, or should I take it further.

Would need pic references for gun bay and wheelbay. or I might use Eduards Trumpeter update sets instructions as reference.

I will put up kit sprues ASAP and any input and ideas would be helpful!

 

 
Here's a bit'o help......

 https://i.imgur.com/LjRRaV1.png

 

 

 
  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Tuesday, October 20, 2020 10:20 AM

Hi James:

 Gotta pipe in here. One of my favorite builds was the All clear 1/48 version. Now as for inspiration look in craft stores and oddball boutiques for detail stuff. You'd be surprised at what you find.

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Tuesday, October 20, 2020 10:21 AM

Ah, sorry for any confusion-I didn't mean to suggest that this kit originated with 21st Century Toys, just that the scale made me think of their line of finished display models.  I never expected anyone to produce a true assembly kit of the 262 in such a large scale.

The bigger the government, the smaller the citizen.

 

 

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Tuesday, October 20, 2020 12:20 PM

Man......that is one big aircraft model!!! Wow!!! 

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    August 2020
  • From: Everett, WA USA
Posted by Gunny Dan on Thursday, October 22, 2020 3:29 PM

James,

If you need any reference photos of the actual insides and such I can provide for you. My Dad's company where I retired to here in Seattle, we built (5) full size Me-262's, and I have terabytes of photos of those builds.

Let me know if we can help with this gigantic kit you are undertaking.

r/Gy Dan

GySgt Daniel Hammer

USMC (RET)

1/48th scale WWII-present modeler

 

  • Member since
    November 2004
Posted by snapdragonxxx on Thursday, October 22, 2020 4:33 PM

Thanks for the most kind offer Dan.

I am now building and will be doing an OOB build and it will be the paint job that I hope to bring this to life.

when you look closely at the parts and the casting it is pretty much designed to be a toy, not an accurate model as it pretty much snaps and screws together.

As prevously said, I will be doing a desert paint job for a Luft '46 aircraft and have just ordered some custom paint masks.

Would love to be able to have a flight in a 2 seater 262!

  • Member since
    December 2018
Posted by Tosh on Thursday, October 22, 2020 6:38 PM

I'm looking forward and am excited for you my good friend.  I really enjoyed building the see through or visible 262 from Trumpeter 1/32 and the old Monogram/Revell 1/48.  

As you mentioned, painting either splinter camo or the night fighter version is always an exciting part of the build!

Your friend's, Toshi & Ezra

Reside in Streetsboro, Ohio

 

  • Member since
    December 2018
Posted by Tosh on Thursday, October 22, 2020 6:53 PM

snapdragonxxx

For those wondering....

Length: 590mm   Wingspan: 680mm

For Americans...

Length 23.2283  Wingspan 26.7717

Cool

 

Wait, just please wait a minute so that my brain and nerves will calm down just a tad bit!!!!! 

I just realized that your going to build a 1/18 scale repeating a 1/18 scale (262)?  You've gone rabid and mad all at once!  Lol!  

This will definately be a project and a half, or more likely two projects at once!  I don't think this kit would or could be even fitted in my very modest condo space or lack of there are.  Good luck my friend, you've given me an out of body experience!  Lol!  And will be following along sir!

Your friend's, Toshi & Ezra

Reside in Streetsboro, Ohio

 

cnq
  • Member since
    March 2013
Posted by cnq on Thursday, October 22, 2020 7:29 PM

I am looking forward to your build.

I have not built one in this scale but I have the 1/18 prebuilt  Me262A &B in my collection Big Smile

  • Member since
    November 2004
Posted by snapdragonxxx on Friday, October 23, 2020 5:53 AM

The build is already going on and due to the lack of detail is pretty far ahead.

This will be a OOB mostly external paint job look as it is very much a toy type job!

 

http://cs.finescale.com/fsm/modeling_subjects/f/2/t/186621.aspx

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.