SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

What are the 1:48 kits you think everyone should tackle?

2778 views
43 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2023
What are the 1:48 kits you think everyone should tackle?
Posted by Coach B on Sunday, February 19, 2023 11:50 PM

I'm a 1:48 fan, mostly because I have huge hands and smaller builds are a pain in the rear. My next build will be the Tamiya Corsair I just picked up. But I'm fairly newly back to the hobby after about 30 years. So I'm really trying to gain skills and improve my outcomes.

I've been bouncing around learning and researching techniques, tricks, etc and I'm left wondering, what are the builds that someone like me should have on my near future builds? For whatever reason, what's a kit you'd recommend someone take on fairly early in their modeling career?

im sure many will want to say "take on whatever interests you" or something equally simple. But I'm really looking to build a list of good projects, from any manufacture, that modelers have enjoyed and think others will have a similar experience. 

Thanks in advance for sharing your thoughts and knowledge.

If I ever stop learning, then I'll stop building.

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Monday, February 20, 2023 9:04 AM

Air brush or hand painting

Props or jets

The Tamiya 1/48's are pretty straight forward.The Spitfires,109's,FW-190 are camo,so they present a challenge,while the mustang and P-47 and Zero have simpler schemes.

Eduard,Airfix,and Revell have straight forward kits of the same subjects

Tamiya makes nice but pricey jets also

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 9:40 AM

Tojo, thank you for the thoughts.

I'm a brush painter for now. Im just learning to use acrylics instead of the Testors enamel that I grew up using exclusively in the 80s and 90s. 

i enjoy both props and jets. 

I was thinking a Supermarine Spitfire should be on my list of upcoming builds, specifically to take on a camo challenge. 

 

If I ever stop learning, then I'll stop building.

  • Member since
    December 2022
  • From: Canada
Posted by Tcoat on Monday, February 20, 2023 9:44 AM

You really can't go wrong with any modern kit.

If I had to say one kit it would be the Tamiya Zero M6A5.  It is just a perfect little kit.

https://cs.finescale.com/fsm/modeling_subjects/f/2/t/191578.aspx

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Monday, February 20, 2023 9:45 AM

Coach B

Tojo, thank you for the thoughts.

I'm a brush painter for now. Im just learning to use acrylics instead of the Testors enamel that I grew up using exclusively in the 80s and 90s. 

i enjoy both props and jets. 

I was thinking a Supermarine Spitfire should be on my list of upcoming builds, specifically to take on a camo challenge. 

 

 

Yes,then camo is less of challenge hand painting

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 9:46 AM

Thank you, Tcoat, that's one I hadn't even considered. I'll take a closer look.

If I ever stop learning, then I'll stop building.

  • Member since
    December 2022
  • From: Canada
Posted by Tcoat on Monday, February 20, 2023 10:30 AM

Coach B

Thank you, Tcoat, that's one I hadn't even considered. I'll take a closer look.

 

Not sure why links to this site won't work for me but at the bottom of my first post is the build thread for mine. It's sort of cool in that they are so so small compared to the US aircraft they fought. It is probably one of my favourite aircraft kits now. 

 

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 10:50 AM

Very cool, I just went through your whole post. Love the weathering you did...esp with the silver underlay, instead of the chips I see added afterwards in most cases. That's definitely on my list now.

If I ever stop learning, then I'll stop building.

  • Member since
    July 2016
  • From: Malvern, PA
Posted by WillysMB on Monday, February 20, 2023 10:57 AM

I build mostly 1/72, but I think for 1/72 or 1/48 it's tough to beat any of the new tool Airfix kits for value for money. They have a very nice series of 1/48 Spitfires.

  • Member since
    June 2014
Posted by BrandonK on Monday, February 20, 2023 11:08 AM

I would suggest going to Scalemates.com once you have found a kit you MIGHT want to build and see when it was first produced. You will find kits made back in the 60-70's are very plentiful, cheap and look good, can be a very frustrating mess for someone who is not used to older molds. Newer kits from the 90-current are ususally far better (easier) to work with. Look up reviews on Youtube on certain kits you have interest in and avoid those that have griped about fit etc. Many builders have fallen trap to kits that are inexpensive only to hate the process before they get done. There are many kits that will make you want more and more, and many that will suck the life right out of you. Avoid the latter.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 11:28 AM

Thanks Willy, I haven't attempted anything from Airfix yet. For some reason I initially had a negative perception of the brand at the start, which I now realize was unfounded. Are there any kits that Airfix is specifically known for doing a great job on that should be on my shortlist?

If I ever stop learning, then I'll stop building.

  • Member since
    December 2022
  • From: Canada
Posted by Tcoat on Monday, February 20, 2023 11:30 AM

BrandonK

I would suggest going to Scalemates.com once you have found a kit you MIGHT want to build and see when it was first produced. You will find kits made back in the 60-70's are very plentiful, cheap and look good, can be a very frustrating mess for someone who is not used to older molds. Newer kits from the 90-current are ususally far better (easier) to work with. Look up reviews on Youtube on certain kits you have interest in and avoid those that have griped about fit etc. Many builders have fallen trap to kits that are inexpensive only to hate the process before they get done. There are many kits that will make you want more and more, and many that will suck the life right out of you. Avoid the latter.

BK

 

This is very good advice! I pretty much always check Scalemates for the history of any kit I buy now since I have been trapped before. Even the best model companies will rerelease some old school kit made from molds from the sixties or even fifties in a pretty new box. Some of those old kits are actually really nice but it is best to find some reviews before buying. A while back I got the Round 2 release of the old AMT '66 Corvair without looking up reviews and was completely disappointed when I opened the box and saw a vaguely car shaped lump of plastic that will take a massive amount of work to make look good.  

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 11:33 AM

Thanks, Brandon. I definitely understand the "sucking the life out of you" comment. I wear an XXXL glove....can you imagine how frustrating a 1:72 or smaller build is for someone with hands this big? LOL Thats why I stick to 1:48. I did a smaller F18 and was ready to throw it across the room. 

So what's a newer mold that's been really well received by the community, in your opinion? I'm trying to make some smarter stash purchases wih Good insights, rather than my usual criteria of "oh that looks cool".

If I ever stop learning, then I'll stop building.

  • Member since
    December 2022
  • From: Canada
Posted by Tcoat on Monday, February 20, 2023 11:47 AM

Coach B

Thanks Willy, I haven't attempted anything from Airfix yet. For some reason I initially had a negative perception of the brand at the start, which I now realize was unfounded. Are there any kits that Airfix is specifically known for doing a great job on that should be on my shortlist?

 

Yep, this is where research comes in. Many of the old Airfix molds are pretty nasty but their new stuff is top notch. Airfix prices are generally very much lower than other companies and when the new kits are as good as they are they have great value. They also have some aircraft that nobody else does which is nice. 
I recently did the Silver Wings Walrus. Beautiful kit that could be brush painted nicely. The wing rigging may be a bit much for jumping back into the hobby though.

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Monday, February 20, 2023 11:51 AM

The Tamiya 1/48 P-51D and P-47 razorback or bubletop are fantastic kits.  I highly reccomend both.

Thanks,

John

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Monday, February 20, 2023 11:58 AM

I like to build Monogram kits, the same ones I built as a kid in the Seventies.  The 1/48 scale kits are still pretty good models (sorry, Hyperscalers!), and can be good simple builds, just for enjoyment.  My favorites among those are the P-51B and P-40B kits, the P-39, the P-47 (razorback and bubbletop), the Typhoon, and the TBD.

I also like Monogram's old original US Navy planes, though I concede that they're still closer to toys than scale models.  But again-they can be built for enjoyment. And even with the operating features, when you're finished, you have a good representation of the subject.

I've got some old pre-merger Monogram and Revell kits in the stash, too, that I never built back then, but which I've picked up, out of curiosity.  Both companies made P-51Ds, for example, and both made Spitfires, albeit different marks.  Revell also made a P-40E, scaled down from their 1/32 kit.  That kit was the basis for the ProModeler P-40E kit, by the way.  I never built any of those, but I'm building them now, in my 50s.

I also like Monogram's large 1/48 multiengined aircraft kits-the B-17G, the B-24D and -J, the B-29, and the B-25 kits. Again, today's modeler might turn up his nose at those, but if you're getting back into building, those are good kits to work with.

I'll also recommend Tamiya's P-51B and F2A Buffalo.  Tamiya kits are good, generally, for their engineering and fit, and for the look of the finished model.  You can't really go wrong with those.

Airfix has good 1/48 scale kits, too.  Airfix has been issuing new-tool versions of subjects they produced years ago, and they are also worth picking up.  Not over-engineered, not tricky for someone getting back into the hobby, and build into nice models.

Eduard has good kits, too, for the same reasons.  I like their P-39 series, particularly.

Hope that helps!

The bigger the government, the smaller the citizen.

 

 

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 12:08 PM

Not going to lie, that Walrus looks super interesting and intimidating. Good on you for such an impressive build.

If I ever stop learning, then I'll stop building.

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 12:09 PM

Very cool, I'll check those out! Thank you.

If I ever stop learning, then I'll stop building.

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 12:15 PM

Oh the Monogram approach is fascinating. In the mid-80s I lived in Seoul, S Korea, and that's when I first started building models with my friends. I remember being at the little Korean shops and being very excited to buy a Monogram kits, mostly because we'd get English instructions. I wonder if I can find one of those old sets that I built....if memory serves the one that sticks out was an F-4 Phantom design. Of course this time I won't test the airworth and launch it off the top of an apartment building with my friends. 

If I ever stop learning, then I'll stop building.

  • Member since
    December 2022
  • From: Canada
Posted by Tcoat on Monday, February 20, 2023 1:08 PM

Coach B

Oh the Monogram approach is fascinating. In the mid-80s I lived in Seoul, S Korea, and that's when I first started building models with my friends. I remember being at the little Korean shops and being very excited to buy a Monogram kits, mostly because we'd get English instructions. I wonder if I can find one of those old sets that I built....if memory serves the one that sticks out was an F-4 Phantom design. Of course this time I won't test the airworth and launch it off the top of an apartment building with my friends. 

 Most of those old Monogram and Revll kits are sitll in frequent production so you should be able to get one easy enough. They truely are great kits for being as basic as they are. 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Monday, February 20, 2023 2:48 PM

For good "starter/refresher" build type 1/48 aircraft kits, the Tamiya A6M2 & A6M2N kits are excellent kits for getting your skills back up to par. Simple assembly, good fit, and low parts count so that you can concentrate on the basics. Also very bargain priced for either one. Not to mention easy paint schemes. For a good jet kit, I'd suggest the Academy F-16 A/C kit for the same criteria. 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 2:50 PM

Thanks, Stik. Good thoughts and insights, I appreciate it!

If I ever stop learning, then I'll stop building.

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Monday, February 20, 2023 6:54 PM

I like the idea of a Tamiya kit as so many have suggested above for their consistency.

That said, I can't resist throwing in an idea for someday.

About 10 yrs ago, having not built a model in decades, a recieved an Academy Avenger "Bunker Hill" as a Christmas gift from one of our adult children. Of course I eventually had to build it, which meants buying long-gone supplies, tools, etc.

If you don't know, Academy offers re-releases of some well-recieved kits from Accurate Miniatures, sadly a now-defunct manufacturer.

It is an awesome kit, and at the time of it's re-release was noted in some online articles as the best 1/48th WWII aircraft kit ever made. I suspect one landing on one of those blogs is what prompted my daughter-in-law to choose it. I started building it in 2013 and have building off and on since then. Can't say I'd recommend it as a first kit back (due to a finnicky upper gun-turrent installation), but I'd sure recommend it as one not to miss.

Again, welcome to the forum.

 

  • Member since
    December 2022
  • From: Canada
Posted by Tcoat on Monday, February 20, 2023 7:06 PM

Greg

I like the idea of a Tamiya kit as so many have suggested above for their consistancy.

That said, I can't resist throwing in an idea for someday.

About 10 yrs ago, having not built a model in decades, a recieved an Academy Avenger "Bunker Hill" as a Christmas gift from one of our adult children. Of course I eventually had to build it, which meants buying long-gone supplies, tools, etc.

If you don't know, Academy offers re-releases of some well-recieved kits from Accurate Miniatures, sadly a now-defunct manufacturer.

It is an awesome kit, and at the time of it's re-release was noted in some online articles as the best 1/48th WWII aircraft kit. I suspect one landing on one of those blogs is what prompted my daughter-in-law to choose it. I started building it in 2013 and have building off and on since then. Can't say I'd recommend it as a first kit back (due to a finnicky upper gun-turrent installation), but I'd sure recommend it as one not to miss.

Again, welcome to the forum.

 

 

I had that Accurate Miniatures kit in my hand half a dozen times and each time put it back on the shelf thinking "next purchase". Then they were gone. I had no idea that Academy has released it now. Now I need to go shopping!

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Monday, February 20, 2023 7:29 PM

Tcoat
I had that Accurate Miniatures kit in my hand half a dozen times and each time put it back on the shelf thinking "next purchase". Then they were gone. I had no idea that Academy has released it now. Now I need to go shopping!

At least you were aware of thier existence!!! Smile They came and went during my modeling hiatus. I am so lucky to have recieved the Academy kit. Even luckier, a friend here gave me an ORIGINAL Accurate Miniatures kit new in the box some years back. What a treat it will be to build that one day.

I hope you get one, and let us know what you think. If you do, let me know, I might still have an electronic copy of the original AM instructions I found online somewhere. They come in handy. Can't say for sure, but I'd be happy to take a look for you.

 

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 10:02 PM

That's a very cool thought and idea. I'll definitely research it further, Greg. Hopefully I can find an aspirational challenge like this once I grow my skills a bit. Today I found myself growing my scalemates wishlist....I really appreciate these ideas and thoughts. 

Anyone else reading this thread with thoughts, I'm really hoping for your input too. I'd much rather buy with some valued insights than stumble into a pile of crud experience. 

If I ever stop learning, then I'll stop building.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, February 20, 2023 10:57 PM

Yeah all the kits the guys have suggested are great kits! 

Only ones I'd question are the Tamiya P-47D and P-51D. They're fantastic kits but you pretty much have to do natural metal finish on both and I'm not sure how well you can do that with a brush. A spray can of aluminum paint might work, I've never tried doing natural metal with anything other than an airbrush myself though. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    February 2023
Posted by Coach B on Monday, February 20, 2023 11:18 PM

I've done it once, not thrilled with the outcome. Im going to do a rattle can of spray paint next time. 

If I ever stop learning, then I'll stop building.

  • Member since
    December 2022
  • From: Canada
Posted by Tcoat on Tuesday, February 21, 2023 6:10 AM

Coach B

I've done it once, not thrilled with the outcome. Im going to do a rattle can of spray paint next time. 

 

A bit pricy but I do all bare metal work with Bare Metal Foil because nothing looks like bare metal like bare metal! The results are well worth the little extra cost.

 

The beauty of it is you can mix up 3 or 4 different ones to give variance without masking what is often a delicate finish. 

This is the ancient Monogram P-38 done with 3 different tones of BMF. 

The Voodoo in the back is also all BMF

  • Member since
    February 2023
Posted by Coach B on Tuesday, February 21, 2023 7:46 AM

Holy cow, that's a phenomenal result. Probably a little beyond my skill level currently, but definitely something to aspire for...wow. 

If I ever stop learning, then I'll stop building.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.