Wait, I should have a Type 97 in my stash as well... Just kidding, I won't copy you, Stik (and I don't have a Chi-Ha anyway...)

LOL! You guys are bad!

I'm painting the metal under wing on my Tony with Alclad. How long should you let the alclad dry before masking over it? It seems a bit tacky yet after 3 hours.

Maybe I should change Japanese Group Build III to the Chi-Ha Build!?!

Jibber: You're welcome to enter at any time! If you can't meet the deadline you can always finish it under Part III.

Clemons: I normally start with a shade somewhat darker than I want and do everything. Then I pre-shade from the top down with the colour I want to use.

Nathan:  I think it says a couple of hours on the bottle but I normally leave it to dry overnight. I too have Alclad seem slightly tacky even after days or weeks of drying. If it's a problem you can spray a gloss coat over it, you probably don't want a matte coat, I've never liked the results when doing this.

Gamera, I'll have it done and thanks.

Jibber: Ok, you're on the list!

Almost finished.. decals, last glossy layer and starting to paint wells with silver

tomorrow the homemade clear aotake :) 

Looks good Bsyamato- almost there now!

Nice Raiden! I like the fading on the green. Decals make it looke even more sleek and fast.

Well, I'm getting along with Alcald. I started by priming with Surfacer 1200 in the airbrush. I like how the the rivets courtesy of RB tool and my shaky hand popped out:

Then I sprayed a gloss black base on the undersides:

Then I sprayed Airframe aluminum and masked off some panels. I found I could mask over the Alclad after about 4-5 hours with no probs:

Followed by Aluminum and Duraluminum:

Then I sprayed the whole aiplane Aluminum for some chipping later on:

Then I finished pre-shading. Black lines, anyone??

Then came the green. I started by lightening Gunze C130 with yellow and white and sprayed inside the preshading. I then lightened it further and faded along the wing roots and fuselage side near the exhaust panels:

I then took the paint straight from the bottle and started blending things together. This is how it looks when finished:

I'm pretty satisfied overall. It might have came out too faded looking...?? But i suppose weathering will darken it some.

Of course, the real 177 was a pretty wore out bird herself:

Fantastic work, Nathan! I love the blotchy look of the olive paint!

Very nice Nathan, I think you have pre-shading down.

Yeah Nathan, both the metallic paint on the underside and the pre-shading on the upper look perfect!

Thanks guys. Jibber- its not the pre-shading thats hard, its trying not to obliterate it! Using highly thinned Mr. Color paint really helps with that.

I do very few planes, but that process really could be modified for armor. Thanks Nathan, we learn all the time here.

Sure could. Any angled edges or raised detail, turret sides/fender edges could be painted black, or a color darker than the base color. Then start slowly building up your base color while trying to leave the preshaded areas less heavy.

[/URL[/URL[URL=http://s1346.photobucket.com/user/kingtiger11/media/Type%2097%20Chi-Ha/IMG_0880_zps8d31da15.jpg.html]

This Type 97 Chi-Ha by Tamiya uses all parts on the sprue's which is something rare in today's kits. The wheel assemblies articulate and I'm hoping I can get the tracks to actually work. I had some problems fitting the hull, there were three separate areas that didn't align but with some Tamiya Putty and Mr Surfacer 1000 I think they're much better. I had to be careful not to sand the rivets that are very prominent. Sub assemblies are complete and I'm ready for priming. For the tracks, I primed flat black then mixed rusty tracks and dark tracks both by Vallejo then a dry brush with Tamiya Gun Metal and finally a dusting of a mixture of African and European Earth.  All in all the assembly only took about 8 hours but the real challenge is to get the camo right.      

[/URL[URL=http://s1346.photobucket.com/user/kingtiger11/media/Type%2097%20Chi-Ha/IMG_0882_zps585dc241.jpg.html][/URL[URL=http://s1346.photobucket.com/user/kingtiger11/media/Type%2097%20Chi-Ha/IMG_0883_zps906b189b.jpg.html]

More pics

[/URL[URL=http://s1346.photobucket.com/user/kingtiger11/media/Type%2097%20Chi-Ha/IMG_0882_zps585dc241.jpg.html][/URL[URL=http://s1346.photobucket.com/user/kingtiger11/media/Type%2097%20Chi-Ha/IMG_0883_zps906b189b.jpg.html][URL=http://s1346.photobucket.com/user/kingtiger11/media/Type%2097%20Chi-Ha/IMG_0879_zps9043b5b5.jpg.html][/URL

Additional pics, bad camera...

Sorry I had trouble loading my WIP pics.

Looking good so far Jibber, really love how the pigments on the tracks came out.

BTW: I'm leaving for vacation/holiday this weekend and will be gone for two weeks. I can follow stuff here on my cell phone but I'm horrible with typing on a touch screen. I'm going to see if I can rent a laptop if possible.

Jibber, it sure builds up nice and quick, doesn't it? It's a fun little kit. What markings are you planning for yours?

Nice work, Jibber!

I wish you much fun and a save trip, Cliff!

Well Jibbers work inspired me to get back and there and finish mine up. I am not to happy with the tracks'upper run as photos show them having sag. I did not think that merely super gluing them to the return rollers would give the proper look so I decided to try drilling holes in the hull side and using small lengths of brass rod to achieve teh look. Four holes and pins per side. Drilling went fine, no problems there, as did measuring and cutting the pins. But installing them...Seven went easily enough but one blasted pin would just not co operate and got my temper and blood pressure up... I had to shut down my bench session and walk away...

I don't know Stik, I've been researching individual tanks with little luck, and I still haven't locked into a camo pattern, but I primed it black and gave it a base coat of Olive Green XF58. I've tested a few browns and came up with that Hershey color brown and of course the yellow stripe. This works for almost any unit. Anyway I'm heading out for a few days and I'll get it painted next week.  

From what I have read, there was no standard camo pattern. You can pretty much go to town on the pattern just follow the style of large blotches of the three colors and use a hard edge. Only unit markings identified them to a group. And not all units had markings. Tamiya Olive Green is a good choice for the green color on IJA takns, at least as compared to the Gunze IJA paints that I have.

Hey thanks Clemons!

Jibber & SP: Sounds good, looking forward to the photos with the camo.

I think I'll use Wayne's technique using silly putty. I hate using it on AFV's because of the smaller pieces like handholds etc but on this one I think it'll work. I'll post the pics. Have a safe trip..