SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

US CARRIER AVIATION GROUP BUILD 2013

145660 views
1622 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2005
  • From: near Nashville, TN
Posted by TarnShip on Thursday, May 9, 2013 1:35 PM

I could take a photo of the picture for you,,,,,,,and send it to you via PM or something

alternatively, it is on page 24 of the Grumman Biplane Fighters in Action, book # 1160

it would be a cool way to build a Bipe without the Yellow wings and silver dope

Rex

almost gone

  • Member since
    March 2005
  • From: near Nashville, TN
Posted by TarnShip on Thursday, May 9, 2013 1:37 PM

Phoenix as ballast I forgot about,,,,,,I should have known better, though,,,,,,,there are a lot of loads with something used as ballast for some special store carriage

almost gone

  • Member since
    March 2005
  • From: near Nashville, TN
Posted by TarnShip on Thursday, May 9, 2013 1:41 PM

I don't have the Coral Sea set, but I do have the Midway set, and the Wildcat, Dauntless, and Devastator guides at the time of Midway all say "top and bottom of both wings"

I wonder though,,,,,,Mark is pretty good at catching the "this aircraft only" variations,,,,,could that be it for that aircraft only?,,,,,,,,otherwise, I would email him and ask if it is intended or is a glitch

Rex

almost gone

  • Member since
    April 2013
Posted by SchattenSpartan on Thursday, May 9, 2013 1:51 PM

Please send me the picture, Rex.

I don't have this book so it would be a pain to get this picture...

Clemens

  • Member since
    August 2010
  • From: Beaverton, OR
Posted by Ghostrider114 on Thursday, May 9, 2013 4:50 PM

I did some checking, it appears that the switch over happened sometime in late April of '42.

here's a picture from Fighting 3 off the Lexington in April of '42

Note the star on the port wing.

Here's some of planes on the Enterprise in April of '42:

These already have stars on both wings.

A shot of Wildcats on the Hornet in April of '42:

It's hard to tell, but they also appear to have stars on the tops of both wings, so we know it wasn't just the Enterprise

Immediately after the battle, Fighting 6 on the Enterprise, May 12, '42

It's hard to see, but again, they appear to have stars on both wings.  The change to the star without the Meatball hasn't happened yet.

All of this suggests that, at the time of the Battle of the Coral Sea, the fleet was using the star and ball roundels on both wings.  However, I could not find pictures of Lexington or Yorktown aircraft from between the date of that first pic and the battle, so I don't know for sure that they changed when the rest of the fleet changed.

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Thursday, May 9, 2013 4:56 PM

Maybe emailing Mark would be the thing to do, Rex.  I have the Midway set too, but haven't looked at it closely, so I missed the note about both wings.  From this website, I assumed it was the same set up already at Coral Sea:  http://www.history.navy.mil/faqs/faq2-1.htm

But as you say, it could well be some individual variations.  Mark does note that the Lex's air group was slow to change from white designators to black, on his 1/700 LAG sheet, so maybe both VF-2 and -42 used their own quirky interpretations of the regs.

Thanks for your insights.  Insignia and markings are things that fascinate me.

 

 

 

 

 

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Thursday, May 9, 2013 5:03 PM

Thanks, Ghost.  Some of the pics didn't come through, but I think I get the idea from what you wrote. 

If there are no photos, who can say anything with certainty?  I wonder if any pictures went down with both ships.

I appreciate your assist.

 

 

 

 

  • Member since
    March 2005
  • From: near Nashville, TN
Posted by TarnShip on Thursday, May 9, 2013 5:04 PM

gotta love that pic of Ghostrider's up there too

almost gone

  • Member since
    April 2013
Posted by SchattenSpartan on Thursday, May 9, 2013 5:17 PM

Does anyone of you know about a B-25 (B, C or D) with NMF?

Clemens

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Thursday, May 9, 2013 5:25 PM

TarnShip

gotta love that pic of Ghostrider's up there too

 
That's not Harmon Rabb, Jr. at the controls?

 

 

 

 

  • Member since
    August 2010
  • From: Beaverton, OR
Posted by Ghostrider114 on Thursday, May 9, 2013 5:28 PM

  • Member since
    April 2013
Posted by SchattenSpartan on Thursday, May 9, 2013 5:32 PM

Still not working for me :(

I can only view the 1st picture.

  • Member since
    August 2010
  • From: Beaverton, OR
Posted by Ghostrider114 on Thursday, May 9, 2013 5:34 PM

hmm, try copying the url into your address bar

  • Member since
    April 2013
Posted by SchattenSpartan on Thursday, May 9, 2013 5:43 PM

Ah, now they work!

And that are some nice pics! Where are they from?

And the big plane on the 3rd pic: Is that a Mitchell?

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Thursday, May 9, 2013 6:02 PM

Now I wondering if the decal sheet confused F-1 from VF-3 with F-1 from VF-2.  

The top picture actually shows two aircraft piloted by Jimmy Thach (in -1) and Butch O'Hare (in -13), both with VF-3, nominally assigned to USS Saratoga.  VF-3 did fly from Lexington in Feb/Mar 42, when Butch earned his Medal of Honor, this according to Osprey's Wildcat Aces of World War 2.  

But by Coral Sea, VF-2 was back with Lex, and F-1 was flown by Paul Ramsey, commanding the squadron.

Anyway, I sent Mark at Starfighter Decals an email, asking for clarification.

And thanks to all of you for your input.

 

 

 

 

  • Member since
    March 2005
  • From: near Nashville, TN
Posted by TarnShip on Thursday, May 9, 2013 6:09 PM

I have extremely limited USAAF stuff*,,,,,,,but, I didn't see any NMF early B-25 while flipping through Air Force Colors,,,,,,,,all the NMF I did see were J models (*I gave almost all my non USN stuff away when I narrowed my focus down)

almost gone

  • Member since
    April 2013
Posted by SchattenSpartan on Thursday, May 9, 2013 6:23 PM

Thank you, Rex.

Opened another thread for my B-25 problems, as they don't belong in here.

Clemens

  • Member since
    March 2005
  • From: near Nashville, TN
Posted by TarnShip on Thursday, May 9, 2013 6:33 PM

ehh, they were just "PBJs before the transfer",,,,,,,,but, I only saw Olive Drab over Gray and Blue variations of PBJs,,,,,,so even that doesn't help you

almost gone

  • Member since
    August 2010
  • From: Beaverton, OR
Posted by Ghostrider114 on Thursday, May 9, 2013 6:44 PM

SchattenSpartan

Ah, now they work!

And that are some nice pics! Where are they from?

And the big plane on the 3rd pic: Is that a Mitchell?

Yeah, I found the first one through google, then the rest of them on the website

http://ww2db.com/

That is a Mitchell, that shot was taken on the Hornet during the Doolittle raid.  I checked the same website for Mitchell pics, most were painted in one form of camo or another, the few NMF ones didn't identify the exact model.  these were all from late in the war though, so they were probably later model Mitchells.

  • Member since
    April 2013
Posted by SchattenSpartan on Thursday, May 9, 2013 7:14 PM

I found one!

It's called "Yankee Warrior" and it has a lovely nose-art:

An Eagle carrying a bomb! Only problem is: I can't find any decals for this plane. :(

I am fully aware of the fact that it was renamed "Yankee Warrior" and got this nose-art after it's restauration.

The number on the tail should be no problem as well as the US roundels, but I need a decal for that nose- art! This machine would be perfect, as it looks awesome and it is a D model, so I can take the AM kit.

Is there any way of getting some custom-made decals?

Any help or suggestion ob this would be a great help.

Cheers, Clemens

  • Member since
    April 2013
Posted by SchattenSpartan on Thursday, May 9, 2013 7:18 PM

Here is a pic of the nose-art:

 I would need  a decal for it twice: 

One for each side

  • Member since
    August 2010
  • From: Beaverton, OR
Posted by Ghostrider114 on Thursday, May 9, 2013 8:49 PM

If you wanted to print that at home, you're SOL, home printers can't generally do the white stuff.  You might be able to find a print shop that can do it for you.  It shouldn't be hard to find the decal paper.

  • Member since
    April 2007
  • From: Twin Towns, MN
Posted by MAgather on Friday, May 10, 2013 12:29 AM

SchattenSpartan

Let me guess:

If you put all the AM stuff on the box of the kit, there would be no box visible on the pics? Wink

Well that was an interesting challenge, so I pulled out the box and took out my stuff. I have more stuff in there than I remembered. I had to pile stuff on stuff just to get it on the boxtop.

If you look closely, you can just see the sidewall of the box at the bottom of the photo. Note to self: Total expense of the build decreases if you don't purchase your AM over 30 years. <VVBG>

Yikes!

Good Modeling,
  • Member since
    April 2013
Posted by SchattenSpartan on Friday, May 10, 2013 2:48 AM

SurpriseStick out tongueStick out tongue

So many AM goodies in one place! Thats a really nice Collection you have there!

The amount of AM stuff I'll use for my big THunderbolt (Hasegawa) is a joke compared to this. I will use:

  • Hasegawa P-47D
  • Eduard Big Ed (cockpit, exterior, masks)
  • Aires gear bays
  • Barracuda wheels
  • Master gun barrels
  • HGW seatbelts
  • Quickboost engine
  • Kitsworld decals for "Eight Nifties"

Cheers, Clemens 

Dre
  • Member since
    June 2007
  • From: here, not over there
Posted by Dre on Friday, May 10, 2013 3:21 PM

I was all excited to find a package waiting for me last night until I opened it to find someone else's order inside...  total bummer.   But, the right package full of resin sweetness arrived today and I'll post the goodies later tonight.

Gotta send the wrong stuff back, too bad as I could use the carbon fiber decals for something else...

  • Member since
    August 2010
  • From: Beaverton, OR
Posted by Ghostrider114 on Friday, May 10, 2013 5:12 PM

got my PE cockpit today, nothing too fancy, just the Eduard TBM-3 zoom set and some masks for the canopy.

  • Member since
    April 2007
  • From: Twin Towns, MN
Posted by MAgather on Saturday, May 11, 2013 10:20 PM

Ghost, That is great, gearing up.

Anybody else excited for 5/15?

Good Modeling,
  • Member since
    April 2013
Posted by SchattenSpartan on Sunday, May 12, 2013 4:13 AM

I am very excited! I can't wait to start that damn Wildcat!

Clemens

Dre
  • Member since
    June 2007
  • From: here, not over there
Posted by Dre on Sunday, May 12, 2013 8:25 AM

I'll be washing/degreasing the Aires resin sets and doing a bunch of cockpit research today in preparation for this GB...  gotta have some reference materials to use.

Dre
  • Member since
    June 2007
  • From: here, not over there
Posted by Dre on Sunday, May 12, 2013 9:32 AM

I promised some products shots, and here's "what the Rock is cooking"...

The kit- 1/32 Trumpeter F-14D Super Tomcat

inside the box

some of the Eduard PE that I intend to use (but not all of it due to the resin stuff)

the Aires cockpit set (this stuff is awesome, can't wait to start painting!)

the Aires wheel wells set (again, really high quality)

and the Aires/Wheeliant wheels set (so much better than the kit parts)

The kit comes with 3 different decal sets for VF-213 USS Carl VinsonVF-2 "Bounty Hunters" USS Constellation (2003) and VF-31 CAG bird USS Theodore Roosevelt.   I'm leaning towards the lo-vis scheme of VF-213, but I won't truly decide until I start slinging paint.

So...  is it 5/15 yet???

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.