SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Have Gun, Will Travel III

34791 views
336 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2013
  • From: Puebla, Mexico
Posted by garzonh on Friday, October 18, 2013 7:58 AM

My friend Tony.

I'm sorry to ask, what is buff?, what is the mix of that magic potion you preserve from ancient knowledge. Im so novice at some times. Remember this is my 4th tank....still looooooong way to learn.

I think the problem with my AB spitting is that my AB hose has a leak at some connector which makes air to get condensed at lot, cause at first is not that bad, but it just gets worse and the AB just end spitting worse than a camel or llama.

Now that my CFO has seen my work I will put into Santas list a new compressor with an incorporated tank and single action AB.

Thank you again.

Hugo

  • Member since
    August 2008
  • From: S.W. Missouri
Posted by Pvt Mutt on Friday, October 18, 2013 9:56 AM

Hugo, Buff is a very very light tan or off white color. I use Tamiya "Buff".

Get a Double Action air brush if possible.  Push button down for air, Pull button back for paint.

Be sure you get a water trap air filter either on the air tank or at the air brush. I have both on my rig.

Tony lee

Shoot Low Boys They're Ridin Ponys

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Friday, October 18, 2013 11:11 AM

there is also a MMA (model master acrylic) panzer interior which is a buff or MMA dirt. i won a set of REAL DEAL weathering piants and tried that on a canadian GRIZZLEY 6x6. i have not tried airbrushing vallejo but want to. will be dusting the suspension of DANA today and will post picks.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Friday, October 18, 2013 4:41 PM

looked at the gun more closely here. i guess the seats on the left side are for the crew. obviously the toweed gun didn't have those. it looks like the seat back on the right side (gunner seat) forward of the cage is folded down. mine does in travel mode but the cage is dismantled too so not sure why yours would be. i had 2 sights with mine, the "box" and the open with telescope.

or i'm seeing things.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    January 2013
Posted by jibber on Friday, October 18, 2013 4:48 PM

The gunners seat in real life looks like it would fold down, but in the kit the back brace and rest are stationary. How in the heck did I miss the sight being that far off....what an idiot. Wayne this is the only sight provided and by the looks of it they would shoot their driver if I don't fix it.  

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Friday, October 18, 2013 4:54 PM

here is the latest on DANA. yes that is american institution pukey green (MMA pale green). seems to be the correct color. nothing uber elaborate but i will be doing A LOT of sub assy and sub-sub assy painting when i build the next one and all future warwheels. just too many nooks and crannies to paint after assembly. the front suspension (with the wheels) has been oil washed with artist oil raw umber and highlighted a bit with black. contrast that with the rear suspension which is still freshly painted. under the fenders looks a little rough but won't be seen anyway. will pin wash the differentials with light gray to highlight a bit (for practice) before airbrushing a mix of dirt and grime which will probably hide all of that

engine didn't turn out great but no one will see it on this build. ps there isn't a pic of it. DON'T PANIC.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    April 2013
Posted by SchattenSpartan on Friday, October 18, 2013 4:59 PM

Hey Jibber, could you do me a favor and take a close-up pic of the muzzle brake?

  • Member since
    April 2013
Posted by SchattenSpartan on Friday, October 18, 2013 5:00 PM

She's shaping up nicely, Wayne!

  • Member since
    January 2013
Posted by jibber on Friday, October 18, 2013 5:07 PM

Thats a lot of suspension and what a difference the wash makes. . For me, I try and paint up all the subs ahead of time for all the reasons you stated. I've done it both ways, I guess it depends on the kit.  

  • Member since
    April 2005
Posted by Thunderbolt379 on Friday, October 18, 2013 5:35 PM

Some great work happening here, gents! Jibber, that's a lot of gun to cram into a small space, you're doing a great job!

It'll be up around Christmas before I can get to my AS-90, there's more on my bench than I can shake a stick at, as they say, and I have three weeks overseas coming up next month, and a lot of work to clear before I go...

Cheers, Mike/TB379

http://worldinminiature.blogspot.com/

  • Member since
    March 2013
  • From: Puebla, Mexico
Posted by garzonh on Friday, October 18, 2013 7:27 PM

Hey, update time...

First round of pinwash, rust and dirty grease...a lot of weathering is still to be done, so lets wait for the finished product.

Yeah, that periscope looks too bright red... I though it would be much transparent, hmmm...might just cover it in black...

  • Member since
    January 2013
Posted by jibber on Friday, October 18, 2013 10:23 PM

Will do

  • Member since
    May 2005
Posted by pyrman64 on Saturday, October 19, 2013 3:37 AM

waynec
i had 2 sights with mine, the "box" and the open with telescope.

or i'm seeing things.

Wayne: the 2 sights were for different targets.  The telescopic sight was for ground targets and the "box" style was for anti-aircraft use.

Greg H

"There is many a boy here today who looks on war as all glory, but, boys, it is all hell." Gen. Wm T. Sherman (11 April 1880, Columbus, Ohio)

  • Member since
    April 2013
Posted by SchattenSpartan on Saturday, October 19, 2013 5:22 AM

Jibber: Thanks for the pics! Looks like Dragon did a very good job on the muzzle brake...

Garzonh: She looks great! The camo looks good and the weathering looks very convincing!

  • Member since
    January 2013
Posted by jibber on Saturday, October 19, 2013 7:38 AM

I think they did, the photos aren't that good. If you look at the Voyager PE set, the muzzle brakes are very similar. One piece barrel and muzzle.

  • Member since
    March 2013
  • From: Puebla, Mexico
Posted by garzonh on Saturday, October 19, 2013 8:14 AM

Hi, thanks.

I will fix that rusted muffler and dirty grime, its just too much.

  • Member since
    August 2008
  • From: S.W. Missouri
Posted by Pvt Mutt on Saturday, October 19, 2013 5:10 PM

How about some color variation.

Vallejo OD

Tamiya OD

See you Monday

Tony lee

Shoot Low Boys They're Ridin Ponys

  • Member since
    March 2013
  • From: Puebla, Mexico
Posted by garzonh on Sunday, October 20, 2013 4:59 PM

Its looking good Tony!

Here is mine finished!!

  • Member since
    April 2005
Posted by Thunderbolt379 on Sunday, October 20, 2013 5:36 PM

Garzonh -- well done! That's a brave mud job, I'd be terrified to lay it on like that, but you pulled it off! That's a hard-used beast!

I'll have your build on the Honour Wall later today!

Cheers, and congrats on being first home,

Mike/TB379

http://worldinminiature.blogspot.com/

  • Member since
    May 2005
Posted by pyrman64 on Sunday, October 20, 2013 6:01 PM

Garzonh: Looks great....excellent weathering!

Mutt: the M43's coming together nicely.

Wayne: Nice job on the FlaK 43.

Greg H

"There is many a boy here today who looks on war as all glory, but, boys, it is all hell." Gen. Wm T. Sherman (11 April 1880, Columbus, Ohio)

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Sunday, October 20, 2013 6:55 PM

hi garzonh: had to look at the pics a couple of times before deciding i like the mud splatter. are you putting this on a base because it looks like a piece of foilage in the front upper left track.

thanks greg but this FLAK 43 isn't mine. mine is the towed version in the DUCKHUNTER GB.

lstest on DANA. i airbrushed a wash of REAL DEAL dirty oil on the black suspension and engine and oversprayed that with dark rust. i like the color but it may not show in the photos. it also brought out every flaw in the prep; sanding marks, seams, runs in the psint. in the future i will stipple everything with mr surfacer brfore finishing. it will add some road grime texture and hide errors.

i painted the engine red for some color. next time i will prepaint every part before building.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Sunday, October 20, 2013 7:36 PM

Nice work Wayne.

I've finally done some work on my 1/48 Bandai Wespe. You may remember that I didn't like the kit road wheels, as they are one sided with just a flat disc as the back. I bought a Tamiya Panzer II in the hope of using the chassis, wheels and  tracks. The Tamiya is about 1 centimeter shorter than the Bandai one, so it can't be used. I've no idea why.

Therefore I've used the Tamiya Pz II road wheels, although I had to drill them out to fit on the Bandai mounting axles. There is no chance that the Tamiya tracks will fit, so I'll have to make do with the resin ones that I bought some time back, although they are quite rough. Since the Tamiya kit is a donor, I'll use as many detail parts as  I can from it, as they are much finer than the 70s Bandai molded items. I have used the Bandai return rollers, as they are OK and a lot less work than making the Tamiya ones fit. Haven't decided on the drive sprockets yet, will look at these tonight.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    January 2013
Posted by jibber on Sunday, October 20, 2013 8:35 PM

Tony I agree with Thunder, I'd be really worried to put that on after all your work but I agree that you pulled it off and it's a really nice build.

  • Member since
    August 2008
  • From: S.W. Missouri
Posted by Pvt Mutt on Sunday, October 20, 2013 8:51 PM

Garz i'm pleased that you hung tight.

You did a great job saving this one.

Tony lee

Shoot Low Boys They're Ridin Ponys

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, October 21, 2013 7:37 AM

Garzonh: Really, really nice work! The camo came out great and I love the splattered mud. Great job all around!

Wayne & Tony: Those two look great two, nice to see all the progress.

I finished my build for 'The Longest Day' and just need some good lighting to photograph her now- so I pulled out the M40 and started back to work on her. Cross your fingers I'll have some photos up soon.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    March 2013
  • From: Puebla, Mexico
Posted by garzonh on Monday, October 21, 2013 7:55 AM

Thunderbolt379: Thank you!, I came here from an invitation an Im glad I came over. I can admire everybody else work.

pyrman64: I also liked very much the mud, it was an experiment and I may use this technique for making a base for the model.

waynec: Nope, I have not being able to make bases but I definitely need to start making them. On the foliage...you are right!, you are a good observer., I did add the foliage to make you wonder it got picked up from ground and got stucked. So, yes, a base would be a good idea with this mud and foliage around. Im thinking in a low emplacement, maybe with a cammo/foliage net over it.

Yours is also coming great!.

Yes, cameras sometimes cant capture the subtle color differences the eye can see...mine looks better on real life. I just need to improve my photo skills.

jibber: Thank you, I took the risk you are right it could have come out very bad, but since I had already destroyed an AB nozzle, then, what the heck?...lets do it.

Tony: already said my great appreciation on your comments in the Armor forum.

Gamera: Oooh, cant wait to see yours and your pics on your The longest day GB. Thanks my friend.

  • Member since
    April 2006
  • From: Denver, Colorado
Posted by waynec on Monday, October 21, 2013 10:41 AM

camo nets are tricky. there is a technique on how to make a modern net by a guy in sweden. takes a lot of practice if you are going to show it deployed plus making modern poles and fans. s quick base with a slightly rutted road would work. keeps your hands and judges' hand off the model. you can get a plaque at craft store with 40% coupon, some cheap kids modeling clay BUT NOT PLAYDOUGH, some cheap acrylic ground color tubes and use real dirt with white glue and a squirt mister.

or an curved elevation msybe headlight high in front. i am working on a simple base buiulding article for my club but most of my guns and armor are at least photographed on 1 of 4 "generic" bases i created.

Никто не Забыт    (No one is Forgotten)
Ничто не Забыто  (Nothing is Forgotten)

 

  • Member since
    April 2013
Posted by SchattenSpartan on Monday, October 21, 2013 4:54 PM

Garz: She's looking absolutely gorgeous! I love the mud effect and that nice camo! You did a mighty fine job on fixing that one!

Wayne: Very nicely done Sir! Everything's looking great so far! Keep up the good work!

Tony: Some really good work on your side as well!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.