SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Glues- Tamiya Extra Thin vs Testors Liquid

7896 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2008
  • From: Budd Lake, New Jersey
Glues- Tamiya Extra Thin vs Testors Liquid
Posted by BeltFed on Saturday, October 3, 2009 7:44 AM

Seeing the "gone baby gone" of Tenax thread got me thinking.  My LHS sells to glues- Tamiya Extra Thin and Testors liquid.  Ive used both, and this is what i have noticed.  Please feel free to corect, add, tweak, share imput, whatever!

Price- TET(Tamiya extra Thin) costs five dollars and comes in a 40ML jar.  TL (Testors Liquid) comes in a 29 ML jar and costs 3.50.  Winner- TET, but id rather drop 3.50 evertime i go to the LHS than 5.00.

 Brush- TET has a nice, fine brush that lowers the amount of collateral damage.  TL comes with a huge, stiff brush.  Winner- TET by a mile.

Odor-TET smells a lot like nailpolish remover, mainlly cause its made of acetate.  It stinks pretty bad.  TL has an entirely different odor, i actually kind of like it.  It doesnt smell nearly as bad.  Winner-TL

 Thinness- Both are very thin out of the jar, and esaily carried by capilary action.  I have noticed that TET seems to get thicker as you use it though, for obviouse reasons.  I havent noticed this with TL

Setup time- TET sets up pretty fast.  It sitll gives you time to move the part around, though.  TL takes a bit of time to set up, however.

Evaporation- Both glues evaporate very quicky- but TL evaporates much faster

Strenght- Both glues cure to a very strong bond.  I dont do strenght thests on my parts, but i beleive TL is stronger.  What do you think?

Collateral Damage- Both glues dont really effect surronding plastic if you get a little bit of glue on them.  Tamiyas brush makes it easier to apply the glue where you want it.  I have had dissolved plastic where i didnt want it using TL, though.  This was only becuase i had a semi-large puddle of it.

 How did i compare the two?  TL has that big, bushy brush, right?  Wouldnt that effect my observations?  Well, i took an old, thickened jar of TET and emptied it out (and disposed of it by dropping it off at the towns chemacal waste collection thing- gotta help the environment wherever practical) and poured the jar of TL in it.  Viola- TL in the jar with the nice brush of TET!

 

SO lemme hear what you think.  Im no expert, so feel free to comment on any of the points i mad, and feel free to add your own as well!

  • Member since
    January 2007
Posted by the doog on Saturday, October 3, 2009 7:55 AM

I never really use the in-bottle brush anyway--cut yourself some cheap brushes into vrious thicknesses and lengths, for different carrying applications.

I'll go to Pro-Weld or Plastruct Weld-On when my Tenax runs out....but I'm not happy about it.

  • Member since
    September 2009
  • From: Spring Branch, TX
Posted by satch_ip on Saturday, October 3, 2009 9:42 AM

I used Pro Weld 10 years ago vs testors and Tenex and was very happy.  I just resupplied with PW and the glass applicator is a must.

I remember that the EPA was trying to ban MEK model glue back then.  I was surprised and happy to see it still available.

  • Member since
    January 2009
  • From: clinton twp, michigan
Posted by camo junkie on Saturday, October 3, 2009 10:06 AM
like wise i use ambroid pro-weld. it costs anywhere from $2.50 to $4.00 a bottle. depending on where you get it. no smell, works great and i've never gone back to anything since i first started using it over 8 years ago!!! just my My 2 cents [2c]
"An idea is only as good as the person who thought of it...and only as brilliant as the person who makes it!!"
  • Member since
    July 2004
  • From: Texas
Posted by wbill76 on Saturday, October 3, 2009 11:58 AM

I use the Testors Liquid for my projects and have been very happy with it. I've never tried the Tamiya variety so can't compare. I don't use the in-bottle brush that comes with the Testors glue but instead use a fine pointed 3/0 brush for most of my applications to have fine control over where the glue goes. I do have to be careful in keeping the lid closed whenever I'm gluing a lot of stuff as it will evaporate quickly if left open for any length of time. I typically will invert the bottle cap and place it over the jar's mouth under those conditions as constantly dipping the large brush in and out effectively does the same thing if repeated enough. Wink [;)]

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.