SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

M1132 STRYKER ESV -surface mine plow 1/35 (step by step)

18872 views
33 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2011
  • From: Loures Portugal
M1132 STRYKER ESV -surface mine plow 1/35 (step by step)
Posted by alexander47 on Monday, October 24, 2011 3:39 PM

I'll start kit M1132 Stryker ESV (surface mine plow) 1 / 35
With only "900"Confused pieces to a volume of 10 "x3.3" X2.2 "

Look at the stack of sprueConfused

  • Member since
    March 2003
  • From: Fort Worth, TX
Posted by RESlusher on Monday, October 24, 2011 3:43 PM

Mmmmmmm...purrrrrty!  Whistling

That one's on my wish list for Christmas...

Richard S.

On the bench:  AFV Club M730A1 Chaparral

On deck:  Tamiya Marder 1A2

In the hole:  Who knows what's next!

 

  • Member since
    March 2003
Posted by Chrisr on Tuesday, October 25, 2011 9:46 AM

I've started mine about a month ago. Finally got the basic vehicle done, took a little break to work on another project before starting that surface mine plow. That's a kit in itself!!

I can tell you that the Stryker itself just about falls together. The plow....I can only hope! LOL!!

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Tuesday, October 25, 2011 12:20 PM

outdated

Mmmmmmm...purrrrrty!  Whistling

That one's on my wish list for Christmas...

[/quote]

 

waiting for Christmas
To sweeten the mouth. See the front axle directiona                                                                                                                                                                                                                                                                                

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Tuesday, October 25, 2011 12:25 PM

Chrisr

I've started mine about a month ago. Finally got the basic vehicle done, took a little break to work on another project before starting that surface mine plow. That's a kit in itself!!

I can tell you that the Stryker itself just about falls together. The plow....I can only hope! LOL!!

 

The plow is in fact are complex, but without it the M1132 w / SMP, AMP, is naked !

  • Member since
    March 2003
  • From: Fort Worth, TX
Posted by RESlusher on Tuesday, October 25, 2011 12:26 PM

You tease!!  Kiss

What color is that you used on the steering linkages?  Looks like XF-56...Tamiya's Metallic Gray.

Good job so far!  Keep us posted!

 

Richard S.

On the bench:  AFV Club M730A1 Chaparral

On deck:  Tamiya Marder 1A2

In the hole:  Who knows what's next!

 

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Tuesday, October 25, 2011 12:34 PM

RESlusher

You tease!!  Kiss

What color is that you used on the steering linkages?  Looks like XF-56...Tamiya's Metallic Gray.

Good job so far!  Keep us posted!

 

 

Used: Revell "Gun Metal" of a (set 6 colors  "revell militar 32340")

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Thursday, October 27, 2011 12:47 PM

Another advance
chassis complete

accounting
Are still left: 782 pieces

 

  • Member since
    July 2004
  • From: Texas
Posted by wbill76 on Saturday, October 29, 2011 2:35 PM

Parts count sounds like a very involved build, looking forward to seeing it all come together. Beer

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Sunday, October 30, 2011 8:28 AM

wbill76

Parts count sounds like a very involved build, looking forward to seeing it all come together. Beer

 

Remaining uff ....( 705 pieces) to finish.Time

  • Member since
    December 2002
  • From: Valrico, FL
Posted by HeavyArty on Sunday, October 30, 2011 9:04 AM

Looks like the build is going well.  A few points though.  Even though the different colored suspension parts may look neat, they are not accurate.  All of the underside is sprayed forest green, just like the rest of the hull.  There are not different colors for the differentials and steering arms, or any other parts. 

The rear light lenses should be all red.  There is no clear back-up light on them.  The light colored slits below the lenses are part of the black-out drive system and have a couple small slits that glow red to guide a following vehicle in low light conditions.

The fuel can (mounted on the left side) should be a darker khaki brown color, not sand.

The water cans san be found in sand, black, or (less common) dark green.

It is looking good.  Keep up the good work and keep us posted.

Gino P. Quintiliani - Field Artillery - The KING of BATTLE!!!

Check out my Gallery: https://app.photobucket.com/u/HeavyArty

"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." -- George Orwell

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Sunday, October 30, 2011 2:58 PM

HeavyArty

Looks like the build is going well.  A few points though.  Even though the different colored suspension parts may look neat, they are not accurate.  All of the underside is sprayed forest green, just like the rest of the hull.  There are not different colors for the differentials and steering arms, or any other parts. 

The rear light lenses should be all red.  There is no clear back-up light on them.  The light colored slits below the lenses are part of the black-out drive system and have a couple small slits that glow red to guide a following vehicle in low light conditions.

http://1.bp.blogspot.com/_qa77E4_PgAg/TFMl0UBeKDI/AAAAAAAAAWc/tg0ky_2hjkE/s640/rear+view.jpg

The fuel can (mounted on the left side) should be a darker khaki brown color, not sand.

http://www.tacticalcommunications.biz/catalog/Scepter%20Can.jpg

The water cans san be found in sand, black, or (less common) dark green.

http://i.ebayimg.com/t/USED-5-Gallon-WATER-JUG-Army-Jerry-Can-Desert-Plastic-/13/!CFy9!P!!2k~$(KGrHqEOKiUE0jQGnNDjBNWK0(yoJ!~~_35.JPGhttp://i.ebayimg.com/t/Military-5-Gallon-Water-JERRY-CAN-Jeep-M-Series-Trucks-/00/s/MzAwWDIyMQ==/$(KGrHqYOKosE5k7FnlQkBObUd3GU1w~~60_1.JPGhttp://www.goldnuggetsurplus.com/mm5/graphics/00000001/MI244%20Water%20Can.JPG

It is looking good.  Keep up the good work and keep us posted.

 

Thank you to show your infomações
But the back has farolin 4X5.5mm, I can not do anything
In my model, can the water is really dark green and the other is "wood of Africa"​​, transmissionand suspension, I know it's green, but I like "in my models to give a personal touch, even if it is exactly equal to the original. "

 

  • Member since
    December 2002
  • From: Valrico, FL
Posted by HeavyArty on Sunday, October 30, 2011 9:00 PM

It is never too late to fix something.  On my screen both the fuel can and the water can look the same color, a sandy-tan color.

This pic shows them.  On the left is a fuel can, on the right is a water can.

I don't get the whole "I like in my models to give a personal touch, even if it is exactly equal to the original" thing.  Why not make it how it actually looks as opposed to some artistic, fictional representation?  Whatever works for you though.  To each their own. 

Gino P. Quintiliani - Field Artillery - The KING of BATTLE!!!

Check out my Gallery: https://app.photobucket.com/u/HeavyArty

"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf." -- George Orwell

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Monday, October 31, 2011 10:39 AM

outdated

HeavyArty

It is never too late to fix something.  On my screen both the fuel can and the water can look the same color, a sandy-tan color.

This pic shows them.  On the left is a fuel can, on the right is a water can.

outdated

I don't get the whole "I like in my models to give a personal touch, even if it is exactly equal to the original" thing.  Why not make it how it actually looks as opposed to some artistic, fictional representation?  Whatever works for you though.  To each their own. 

 

What I want is to give a personal touch in my models, even if not equal to the original, if I dothe same is also equal to hundreds of models that proliferate in the sites on the net
It is as you say "every monkey in your trunk"

Best regards of Portugal

Information to all members and especially the "modelers Purists"
It is with intent and purpose of recreating and pass the time, I build plastic models, not to build faithful replicas.
Putting them usually another option, a color different or one and one extra piece kit beyond the scope of the original
I always have on boats and military vehicles now!

MORE A STEP in body

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Tuesday, November 1, 2011 4:38 PM

outdated

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Thursday, November 3, 2011 8:59 AM

Outdated

  • Member since
    March 2003
  • From: Fort Worth, TX
Posted by RESlusher on Thursday, November 3, 2011 9:04 AM

It's coming along nicely!  Yes

 

Richard S.

On the bench:  AFV Club M730A1 Chaparral

On deck:  Tamiya Marder 1A2

In the hole:  Who knows what's next!

 

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Saturday, November 5, 2011 1:44 PM

outdated

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Saturday, November 5, 2011 1:59 PM

alexander47

 HeavyArty:

Looks like the build is going well.  A few points though.  Even though the different colored suspension parts may look neat, they are not accurate.  All of the underside is sprayed forest green, just like the rest of the hull.  There are not different colors for the differentials and steering arms, or any other parts. 

The rear light lenses should be all red.  There is no clear back-up light on them.  The light colored slits below the lenses are part of the black-out drive system and have a couple small slits that glow red to guide a following vehicle in low light conditions.

http://1.bp.blogspot.com/_qa77E4_PgAg/TFMl0UBeKDI/AAAAAAAAAWc/tg0ky_2hjkE/s640/rear+view.jpg

The fuel can (mounted on the left side) should be a darker khaki brown color, not sand.

http://www.tacticalcommunications.biz/catalog/Scepter%20Can.jpg

The water cans san be found in sand, black, or (less common) dark green.

http://i.ebayimg.com/t/USED-5-Gallon-WATER-JUG-Army-Jerry-Can-Desert-Plastic-/13/!CFy9!P!!2k~$(KGrHqEOKiUE0jQGnNDjBNWK0(yoJ!~~_35.JPGhttp://i.ebayimg.com/t/Military-5-Gallon-Water-JERRY-CAN-Jeep-M-Series-Trucks-/00/s/MzAwWDIyMQ==/$(KGrHqYOKosE5k7FnlQkBObUd3GU1w~~60_1.JPGhttp://www.goldnuggetsurplus.com/mm5/graphics/00000001/MI244%20Water%20Can.JPG

It is looking good.  Keep up the good work and keep us posted.

 

 

Thank you to show your infomações
But the back has farolin 4X5.5mm, I can not do anything
In my model, can the water is really dark green and the other is "wood of Africa"​​, transmissionand suspension, I know it's green, but I like "in my models to give a personal touch, even if it is exactly equal to the original. "

 

You're right taillight is the evil, which was mounted was the front !!!!!Tongue Tied

  • Member since
    October 2008
  • From: England
Posted by P mitch on Saturday, November 5, 2011 2:43 PM

I picked this kit up last week as it was on sale so going to bookmark this build till I get brave enough to attach it myself

"If anybody ever tells you anything about an aeroplane which is so bloody complicated you can't understand it, take it from me: it's all balls." R J Mitchell


  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Saturday, November 5, 2011 4:13 PM

P mitch

I picked this kit up last week as it was on sale so going to bookmark this build till I get brave enough to attach it myself

Ok, this kit is very interesting and complete with many details, has 875 pieces useful "You can make several changes"

It should be very careful in its construction!

 

  • Member since
    May 2005
  • From: Dublin Rep Of Ireland
Posted by terry35 on Saturday, November 5, 2011 5:06 PM

Nice work so far, that mine plough thingy looks great.

Terry.

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Monday, November 7, 2011 2:20 PM

outdated

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Wednesday, November 9, 2011 1:46 PM

outdated

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Wednesday, November 9, 2011 1:55 PM

terry35

Nice work so far, that mine plough thingy looks great.

Terry.

 

You're not seeing the surface mine (ploughe) plow, but for now you are seeing the "Stryker ESV"

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Saturday, November 12, 2011 11:05 AM

Outdated

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Saturday, November 12, 2011 3:35 PM

The vehicle in the finishing straight

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Monday, November 14, 2011 3:49 PM

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Friday, November 18, 2011 12:56 PM

Finished vehicle Smile

  • Member since
    June 2011
  • From: Loures Portugal
Posted by alexander47 on Sunday, November 27, 2011 10:45 AM

FULL FINICHED

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.