lurch

Gamera I saw the weather for you guys out there. Its almost as bad as we get here in Wisconsin. Rest your back up I would like to see more of your great builds on here. 

 

Lol, it was only 6-8 inches / 15-20cm. It's just normally we get the snow and then it's melted in three-four days. This week it's been barely above freezing and overcast so the snow has hung around.

I'm old enough now or maybe just lazy so that when my back starts to get a little sore I put up the shovel and head back in. No way I'm going to shovel enough to get a heart attack!

Gamera I saw the weather for you guys out there. Its almost as bad as we get here in Wisconsin. Rest your back up I would like to see more of your great builds on here. 

Well, I'd guess being down and sick is as good an excuse as any... 

Hope you're feeling better now. 

I'm sitting here with my back sore from shoveling snow yesterday... 

Sergey: 'Maybe go with Plan V now...'

Ivan: 'Plan V?' 

Sergey: 'V for vodka.' 

Ivan: 'I think I like this plan!' 

So as the GB deadline comes up I only have this to show:

Ivan had his head repositioned a bit:

Sergey still does not look convinced of Ivan's combat strategy:

Sergey:  Hey Comrade, look like we miss deadline.

Ivan:  Even so, we must go on.  If we don't hurry, snow will melt!

Sergey:  So we keep go?

Ivan:  We keep go.  That is plan.

Yeah, you guys are right.  I wanted to paint last night but thought the better of it.  Maybe this weekend if I can get rid of this sinus infection.

Real G,

It just occurred to me that since Covid is a respiratory disease maybe airbrushing right now isn't a good idea.  Breathing in those fumes even if you wear a respirator isn't going to be good for you in your present condition.  Just something to think about.  Take care & stay safe.

TJS

I thinkl you are correct in that assumption. Maybe in 1/5 scale.  I will have to do more research on that and find out.

Maybe the prop is backwards since she's in reverse??? 

All joking aside please as the guys already said put your health first. Good excuse just to take it easy and catch up on some books and movies- or just a few good naps. 

Lurch: I think the 1/6th version or a scratchbuilt one would be better for R/C. I'm guessing the kit in 1/35th is about 3 inches/ 10cm long? Probably too small for a R/C installation - although the stuff is so much smaller these days it might be possible?  

Get well Real G. Mr. Tom is right. Take care of yourself first. Everything else can wait for later.

I hope that you take it easy and let yourself recover fully.  Models and forum posting can wait.  Stay safe and take care

TJS

Thanks Hutch!  I had not considered the effects of "long COVID", and was wondering why I still had a persistent cough and felt blah.  My coworker who gave me the bug told me he was having the same problems.  

So here I am plugging away at home on my work project, thinking about airbrushing this evening...

Firstly, look after yourself & do whatever's needed to get well.

Secondly, that's a great-looking model, more delicate than I'd have thought, and those figures look about ready to talk  I like the custom-built jig, too!

That's really a sharp little build,looking good.

Lurch, I don't think the kit is available anymore, but Trumpeter makes one that should be around.  DML had a 1/6 pre-assembled aerosan for their action figures.  It was cool, but I only have one Soviet tanker guy, so I passed.

Tom, I have been trying to get out the airbrush, but work and COVID after-effects make it tough.  By the end of the day I'm too pooped to do anything.  I'll try again tonite.

You're making great progress on the little Aerosan!  I love that "jig" you made to keep the skis in alignment.  I knew a guy who was a good friend, a model mentor, and a master model builder and he made jigs for everything that he built, from railroad cars to WWI fighter planes.  Seeing your jig brought back many good memories of him.

TJS

Any more updates? Also is that kit still available? I may try to make an rc version of that.

Cool little kit you got here G. Hope you feel better.

Thank you for tuning in guys.  My work computer is now set up at home so I'm back in business!

The kit propeller is... um... backwards.  That is, the trailing edge is fatter than the leading edge, and the camber is on the front side.    To fix the boo-boo, I removed the hub detail and mounting shaft, and flipped them around.  Problem solved.

I took a quick look at Trumpeter's larger armored aerosan and IT HAS THE SAME PROBLEM.  What the heck?!  At least the Trumpy kit has a separate PE hub.

So I then pre-painted the hard to reach areas black and stuck on the remaining detail bits.

And then a blast of rattle can black primer.

A bout of COVID has slowed me down, but progress is being made.

As an aside, a friend gave me a full set of paint brushes for Christmas.  So I used a couple to paint the insides of the model.  What I have recently learned was that in the past I was putting too little paint on the brush.  I used Testor's Black Chrome Trim (because I ran out of my favorite Testos paint pen), a paint I never had any success hand brushing.  By keeping the brush loaded with paint and properly moistened with thinner, I was able to get good results.  Lesson learned.

Thats a realy cool looking kit. I will be watching to see how it comes out.

Thanks Gamera!

Oops, sis took her laptop to her apt it seems.  

Yuck, hope you're feeling better soon G! 

I am stuck at home this week because a coworker came down with COVID and might have given it to me. The PCR test has not come back yet due to a backlog, but I was down with flu-like symptoms since Monday.  Feeling better now, but still achy and with a sore throat.

BUT!    That means I could work on fun stuff.  Well, at least between naps.  I made some progress and will post some piccies tonight after I drag out my sister's old laptop (Flickr is smartphone-unfriendly).

Gamera,

Yeah, the ski attachment points are fragile, as are the suspension arms, so a base would seem to make sense.  The skis have raised runners on their bottoms, so getting the skis nice and straight is tricky.  To solve the problem, I cobbled together a simple jig so help align the skis:

The triangle on the jig indicates the front - I discovered the front and rear skis have very slightly different track widths.

Ivan and Sergey discuss the upcoming painting process.

I think Ivan's head will need to be repositioned - he's not looking at Sergey!  Fit of the figures is 1970's terrible.

Wow, yeah fragile enough I'd be tempted to perma-mount the thing on a base after you finish so she doesn't get handled much.  

Real G

Tom,

It comes with these two guys from Miniart:

The two just invite a caption contest.  Like the guy on the right could be thinking "Yeah, right.  We ARE lost!"  Amusingly, although the instructions give part numbers for them, the sprues have none.

Trumpeter's kit of the same subject has a pair of guys seated and ready to go.

 

Love it! 

Good work so far, RealG!

I wonder how well it steered, given the long skis?  Probably like a WW II log.  

I stuck the delicate suspension arms on last night.  The skis will remain loose until after painting and weathering.

It is super fragile now!  I'll cobble together a jig to set the ski alignment.

Looks cool G!!!

It would take a couple of bottles of vodka before I let anyone strap me in that crazy thing...

Yeah, I made the Trumpeter kit this year and the figures in your kit are better.  The front gunner's hands won't reach the machine gun and the driver looks like a hunchback.  Good luck with the rest of the build and Happy Holidays!

TJS

Tom,

It comes with these two guys from Miniart:

The two just invite a caption contest.  Like the guy on the right could be thinking "Yeah, right.  We ARE lost!"  Amusingly, although the instructions give part numbers for them, the sprues have none.

Trumpeter's kit of the same subject has a pair of guys seated and ready to go.