SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Shermans vs Panthers/Tigers

2372 views
36 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Posted by Anonymous on Friday, October 17, 2003 5:26 PM
n/m ignore this reply Big Smile [:D]
  • Member since
    November 2005
Posted by Anonymous on Friday, October 17, 2003 4:50 PM
thanks thats cleared it up about capping i wondered why they capped and then recapped the rounds
Ron say more Tank talk it was good to here what peaple say inside the tanks
  • Member since
    November 2005
Posted by Anonymous on Friday, October 17, 2003 3:09 PM
ABBREVIATION: (APC) AP CAPPED
TITLE: (APC) AP CAPPED -- ARMOR-PIERCING CAPPED

Armor-piercing round fitted with a hardened steel cap over the nose to increase its penetrating power. The cap is often covered by a streamlined ogive to improve its accuracy.

APCBC
Armor-Piercing, Capped, Ballistic Cap. APCBC projectiles feature an armor-piercing cap, which diffuses the impact energy to the shoulders of the shell and away from the tip of the projectile to help prevent shatter failure. Piercing caps tend to be blunt, so a pointed ballistic cap or windscreen is placed over the piercing cap to improve flight characteristics.

found a site with a few definitions

http://afvdb.50megs.com/glossary.html
  • Member since
    November 2005
Posted by Anonymous on Friday, October 17, 2003 2:45 PM
Well, I had that all tabbed and nicely formated so everything was in line before I pressed 'reply', I think everybody can figure out the pennetration chart with just a little brain power.... I hope. I know it's the weekend and all, but...

Ron.
  • Member since
    November 2005
Posted by Anonymous on Friday, October 17, 2003 2:42 PM
Hi All,

Here are some stats for Allied Armor main guns.
APC = Amored Piercing Composite
AP = Armored Piercing
HVAP = Hyper Velocity Armored Piercing (Hypervel)
APCBC = Armored Piercing Composite BC =? ( a solid shot)
SVDS = Super Velociy Discarding Sabot (APDS... ‘Sabot’)

Weapon/ Penetration at (inches over milimeters):
Ammo 500yds 1,000yds 1,500 yds 2,000yds

75mm gun, M2 (M3 mediums, very very early M4’s)

APC M61 2.4” 2.2” 2.0” 1.8”
66mm 55mm 51mm 46mm

APC M67 2.3” 1.8” 1.3” 1.0”
58mm 46mm 33mm 25mm

75mm gun, M3 (M4 Shermans, early, dry stowed)

AP M72* 3.0” 2.5” 2.0” 1.7”
76mm 63mm 51mm 43mm

* This was the best performing round on the ‘75. An experimental HVAP was never issued.

76mm gun M1series (M4 Shermans, wet stowed)

APC M62 3.7” 3.5” 3.2” 3.0”
93mm 88mm 82mm 75mm

HVAP M93 6.2” 5.3” 4.6” 3.9”
157mm 135mm 116mm 98mm

90mm gun M3 (T26, M26 Pershing, M36 Jackson)

APC M82 4.7” 4.4” 4.1” 3.8”
(2650 fps) 120mm 112mm 104mm 96mm

APC M82 5.1” 4.8” 4.5” 4.2”
(2800 fps) 129mm 122mm 114mm 106mm

HVAP 8.7” 7.9” 7.0” 6.1”
221mm 199mm 176mm 156mm

17 Pounder (Sherman Firefly)

APCBC 5.5” 5.1” 4.7” 4.4”
140mm 130mm 120mm 111mm

SVDS 8.2” 7.6” 6.9” 6.3”
208mm 192mm 176mm 161mm

The Firefly is by far the best armed Sherman of WWII. The M26 was a match for the Tiger, but appeared too late in the war.

This information was referenced from Hunnicutt’s books on the Pershing and Sherman. Hope it helps!Big Smile [:D]

See y'all Monday

Ron
  • Member since
    November 2005
Posted by Anonymous on Thursday, October 16, 2003 2:06 PM
QUOTE: Originally posted by shermanfreak

The 17 lber that the British used in Firefly production was offered but turned down by the Americans who were sure that the 76 would be sufficient for this role.




Yes, a costly error on the part of the US Army.Disapprove [V]

Ron.
  • Member since
    January 2003
Posted by shermanfreak on Thursday, October 16, 2003 11:51 AM
Just to wade into this debate on the gun side of things.

The 76mm gun installed on the later Shermans was home grown and not of British manufacture. The 17 lber that the British used in Firefly production was offered but turned down by the Americans who were sure that the 76 would be sufficient for this role.

Happy Modelling and God Bless Robert
  • Member since
    November 2005
Posted by Anonymous on Thursday, October 16, 2003 8:36 AM
As well as two piece ammo, the ammo itself was huge, couldn't store more than 20 rounds.
  • Member since
    July 2003
  • From: USA
Posted by okieboy on Wednesday, October 15, 2003 11:38 PM
Panther 44,

The US didn't immediately start putting the British 75mm gun in our own Shermans because they didn't want a foreign gun in their tanks!
This line of thought didn't last long, but it did hinder the early Shermans. The Soviets' JS tank was indeed formidable, but I think one
of its drawbacks was that its shells weren't one piece. I think they had to load the projectile and the powder separate; something like
a ship's large main guns.

Roy
"We sleep safe in our beds because rough men stand ready in the night to visit violence upon those who would do us harm." George Orwell
  • Member since
    November 2005
Posted by Anonymous on Wednesday, October 15, 2003 5:29 PM
i'll see what i can find for you tonight panther 44 , i got a whole bunch of links at home dealing with armor thickness of different afv's, penetration , armor and infantry tactics, guns and munitions etc etc. i do remeber seeing a nice chart with all the differences between different types of afv munitions i'll see if i can find it again when i leave work.
  • Member since
    November 2005
Posted by Anonymous on Wednesday, October 15, 2003 5:15 PM
Several countries had developed Sabot rounds, mostly using Tungsten penetrators.
  • Member since
    March 2003
  • From: Rain USA, Vancouver WA
Posted by tigerman on Wednesday, October 15, 2003 5:07 PM
Thanks PantherLehr, I know I have penetration charts somewhere, but I couldn't locate them. Maybe we should start a Tiger vs Panther thread. LOL

"It is well that war is so terrible, lest we grow too fond of it."-R.E.Lee

   http://i7.photobucket.com/albums/y269/wing_nut_5o/PANZERJAGERGB.jpg

 Eric 

  • Member since
    May 2003
  • From: The Buckeye State
Posted by Panther 44 on Wednesday, October 15, 2003 3:35 PM
Wow! Ya'll are overwhelming an "ignernt ol' man". I refer back to page one with teddtA's post about the Firefly firing the APDS round and piercing the King Tiger's armor, I did not know they had this type of round at that time. I thought this was some modern developement that was used only with today's smooth bore guns.
I was thinking in WW2 they had the armor piercing or high explosive rounds only.
Will some one elaborate on this a bit more? Thanks to all who have responed to this point. I'm very gratefull to all of you for your time and kindness.
Regards,
Joe
Just remember, ignorance is no excuse for the law. - Moe
  • Member since
    January 2003
  • From: Utah - USA
Posted by wipw on Wednesday, October 15, 2003 2:02 PM
APDS?? Sorry, I got very little tecno-speak when it comes to tanks!

Bill
Bill ========================================================== DML M4A2 Red Army ========================================================== ========================================================== -- There is a fine line between "hobby" and "mental illness". (Author unknown)
  • Member since
    May 2003
  • From: Upstate NY
Posted by Build22 on Wednesday, October 15, 2003 1:58 PM

I believe it !


Just a quick little flashback there, huh, Ron


Nice desription - I got the mental picture




Jim [IMG]
  • Member since
    November 2005
Posted by Anonymous on Wednesday, October 15, 2003 1:26 PM
This has turned into a nice discussion about armament! The US did upgrade the 75mm from the M2 (common on Lee's and Grants) to the M3 for the later M3 mediums and M4's. The 76 was supposed to be the US's answer to the German 75.
For some odd reason, the US has always lagged behind in tank weapon development. The 17 pounder was better than the 76 in the Shermans, the M60's incorporated a British designed 105mm and the new 120 on the M1A1, A2, etc, is a smooth bore by Rhinemetal (I believe).
APDS is usually referred to simply as 'Sabot' by tankers (easier to say in fire commands) and is a nice, kick butt type of round. You can really feel the difference between a HEAT (High Explosive Anti Tank) round and a Sabot when you send it... YAHOO!!!!Big Smile [:D]Tongue [:P]Tongue [:P]Tongue [:P] GUNNER! SABOT! Two tanks! Right tank first! (Identified.... Up!) FIRE! Onth'way! BOOM! A nice sensation as the sights are pressed back against your forehead and the driver feels like a giant has just slammed the front plate with a hammer!!! ( the front road wheels rock off the ground)

TARGET! LEFT TANK!!! ...

No wonder football bores me.Wink [;)]

I miss my tank.

Ron.

Sorry, got carried away.Blush [:I]
  • Member since
    November 2005
Posted by Anonymous on Tuesday, October 14, 2003 8:49 PM
Panther44

APDS means "Armour Piercing Discarding Sabot". Plenty of resources on the net about these, but for a brief description see
http://www.periscope.ucg.com/terms/t0000040.html.
(This is just the first entry after a Google Advanced Search on "SABOT APDS")

The British 17 Pounder Mk IV was approximately 76.2mm

Like the main guns of most nations, the experiences of WW2 combat ensured that Sherman gun development was always an imporvement on what went before. The later Sherman guns were vastly superior to the early war guns, not that an early Sherman couldn't still mix it with a stug or Panzer IV. Basic principle - don't bring a knife to a gun fight.Tongue [:P]

Happy Modelling
Peter
  • Member since
    November 2005
Posted by Anonymous on Tuesday, October 14, 2003 8:44 PM
According to penetration figures i have (pulled from charts of a strategy book for the game combat mission barbarosa to berlin - their armor thickness charts are close to what my other references say, so hopefully the penetration chart is pretty accurate too)

For the panther 75mm KwK42 L/70 max penetration with AP rounds is at: 100m - 176mm, 500m - 160mm, 1000m - 142mm, 2000m - 112mm
For the tiger 88mm KwK36 L/56 max penetration with AP rounds is at: 100m -154mm, 500m - 142mm, 1000m - 129mm, 2000m - 105mm

I only have reference for German and Russian armor, almost nothing on the allies. Any one have penetration information on the various guns shermans got equipped with?

APDS stands for armor piercing discarding sabot. Have a look at http://www.ciar.org/ttk/mbt/15.munitions-apfsds.html they describe it much better than i ever could, have a look at the -APFSDS Shedding its Sabot In-Flight- picture, give you a good idea on how it works; it’s the same thing for apds minus the fin stabilized part
  • Member since
    May 2003
  • From: The Buckeye State
Posted by Panther 44 on Tuesday, October 14, 2003 7:15 PM
What is an APDS round? What would a 17pdr. translate to in milimeters? How much better were the Sherman guns at the end of the war
compared to the start of the war?
Just remember, ignorance is no excuse for the law. - Moe
  • Member since
    March 2003
  • From: Exit 7a NJ Turnpike
Posted by RAF120 on Tuesday, October 14, 2003 6:53 PM
The US did increase the lenght of there barrel for better muzzel velocity. They did that when they intorduced the 76mm gun.
Trevor Where am I going and why am I in this handbasket?
  • Member since
    November 2005
Posted by Anonymous on Tuesday, October 14, 2003 6:44 PM
The Firefly was the nickname of the gun, due to the blast effect when the gun fired APDS rounds, which could pierce King Tiger armour.

Canadians in Normandy faced Tiger I's and II's, 4 Heavy Tank Battalions, along with about 4 SS Panzer Divisions, and 9 or so Wermacht Divisions.
  • Member since
    March 2003
  • From: Rain USA, Vancouver WA
Posted by tigerman on Tuesday, October 14, 2003 5:13 PM
The British incorporated their 17pdr. into a Sherman and dubbed it Firefly. Had about the same impact as a Panther's gun, Perhaps better.

The Panther's 75mm had a muzzle velocity of 3068 ft. per second against 2600 ft. per sec for the Tiger's 88. This is according to Ewe Feist in his book Deutche Panzer 1917-1945.

"It is well that war is so terrible, lest we grow too fond of it."-R.E.Lee

   http://i7.photobucket.com/albums/y269/wing_nut_5o/PANZERJAGERGB.jpg

 Eric 

  • Member since
    May 2003
  • From: The Buckeye State
Posted by Panther 44 on Tuesday, October 14, 2003 4:47 PM
Poniatowski,
If the size of the charge, barrel length and quality of the propellant contribute to muzzle velocity, were any of these things incorporated
into the Sherman? It looks to me as if the length of the barrel (at least on the 75's) remained unchanged. If barrel length could help improve muzzle velocity, why didn't the U.S. do this? I'm not questioning the accuracy of your statement (because you've already shown you know much more about this than I), but these things all seem like things that could have been done to help give the U.S. 75 a bit more destructive force.
Regards,
Joe
Just remember, ignorance is no excuse for the law. - Moe
  • Member since
    November 2005
Posted by Anonymous on Tuesday, October 14, 2003 3:20 PM
Muzzle velocity is a factor of meters per second a round travels when it leaves the muzzle. This, of course, decreases as soon as the projectile leaves the tube. The size of the charge (powder in the casing in a tank round), length of the barrel, rifling, taper (if any) and quality of the propellent all determine muzzle velocity, not to mention temperature, all determine muzzle velocity.
Added to muzzle velocity is penetration. Obviously, mass and kenetic energy have a lot to do with this: Example, an 88mm round traveling at 3,000 feet per second will have a lot more penetration ability than a 37mm round at the same speed.... The 155mm HE rounds an artillery piece fires almost literally lob onto a target, but they'll go through a LOT of armor, just due to weight!
I don't have any reference material here, but at long ranges an 88 would retain more penetration ability than a 75 just due to mass.
All 'round, the Panther is acknowledged as a better tank than the Tiger I (and M26 I believe). Power to weight was better, reliability was better and armor disposition was better. Its gun couldn't 'reach out and touch' someone as well as the 88, but all in all, I'd take a Panther over a Tiger, if I were a German tanker.
If I remember, I'll take a look at some specs for the 75 and 88 tonight, as well as the 90 on the Pershing. Also, if I'm not mistaken, the 75, 88 and 90 were all better than the early JS series 120mm (it was a 120, wasn't it?) due to quality of propellent.

Any help from y'all who know more about German armor?

Ron.

I also heard that Ordnance told Eisenhower (before D-Day) that the 76 on the Sherman could take care of a Panther.... I'm sure some Colonel or General at Aberdeen was fried for that one!
  • Member since
    May 2003
  • From: The Buckeye State
Posted by Panther 44 on Tuesday, October 14, 2003 3:02 PM
Hello again,
Thanks for the replies.
I do have a question or two that arises from tigerman's statement that the Panther's 75mm was more lethal than the
Tiger's 88mm. Why was this? I think that some of it probably has to do with the muzzle velocity. What determines muzzle
velocity? Would the 75 have been as effective at longer ranges as the 88?
Also get the impression that the Panthers probably were to be feared more than the Tiger (not only because of the gun
but also mobility and the sloping armor).
Regards,
Joe
Just remember, ignorance is no excuse for the law. - Moe
  • Member since
    November 2005
Posted by Anonymous on Monday, October 13, 2003 9:53 PM
Yes, they did meet Panthers and Stugs more often than Tigers. Tiger ll's were even a greater rarity.
  • Member since
    July 2003
  • From: Philippines
Posted by Dwight Ta-ala on Monday, October 13, 2003 9:09 PM
Hi Glen,

Thanks for the tip. It should be malfunctions.

Correction done.

  • Member since
    November 2005
Posted by Anonymous on Monday, October 13, 2003 9:05 PM
Hey Dwight!
Do engineers make 'mulfunctions', multi-functions or malfunctions?

Glenn
  • Member since
    July 2003
  • From: Philippines
Posted by Dwight Ta-ala on Monday, October 13, 2003 7:44 PM
I read that Shermans have meet Panzer IV's more frequently than Panthers or Tigers. Also, Shermans will only have the "unfortunate" advantage when they have superiority in numbers or during city-fighting where the long-barrelled German tanks have difficulty in maneuvering.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.