SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

My first Sherman Tamiyas M4A3

782 views
13 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2007
  • From: N.H.
My first Sherman Tamiyas M4A3
Posted by panzerguy on Saturday, July 19, 2008 10:43 PM

 

  Hey guys I got this kit at the same time as the willys jeep I posted a couple of weeks ago,started it then put it away for awhile. After seeing some of the great allied armor some of you guys have posted I decided to have another go at it.

   I added the armor plates using some sheet styren for the hull and putty for the turret. I've come to find out afterwards that A3's did not normaly have the applique armor do to the wet stowage of the ammo.I also think that the welds might be a little bigger than I wanted Sigh [sigh]

 

 

   I scratch built the Cullin(did I spell that rightConfused [%-)]) device out of plastic stock and added a little more detail to the travel lock.

 

  The fifty cal. and cradle are frome the Acadamy US machine gun set.

 

 

  The stowage is a combination of stuff that came with the kit and from Tamiyas Allied veh. stowage kit.

    I shaved off all those nasty molded on hatch and engine deck handels and replaced them with ones made from copper wire.

 

   Well let me know what ya all think . Any advice you guys give will be a big help for my next one Dragons M4A3E8. Just remember its my first so be gentleWhistling [:-^]

     (P.S. Just noticed the headlites, they will be delt with)

 

"Happiness is a belt fed weapon"

  • Member since
    January 2007
Posted by the doog on Sunday, July 20, 2008 8:12 AM

It's tooo bad you didn't get your research straight before adding the armor, because othe rthan that glaring error, this is a beautiful, well-executed build, with very little to criticize!

Nice finish all around, nice commitment with the grab handles, good stowage arrangement and the Cullin device is perfect!

Lesson to be learned, IMO? You've obviously got the skills down--now RESEARCH correctly before attempting another tank which has as many quirky variants and variations in production before picking up the glue brush! (Which means just about all of them!--Wink [;)])

Really though, a great looking Shermy! Big Smile [:D]

  • Member since
    April 2008
Posted by The 3rd Placer on Sunday, July 20, 2008 8:31 AM

I like it, the "50" tank is the one I am going to model, I just love large vehicle numbers.

Great finish.

Ryan

  • Member since
    May 2006
  • From: Queensbury,NY
Posted by panzer88 on Sunday, July 20, 2008 8:49 AM
Accurate or not, this is a superb build!!!Thumbs Up [tup] The weathering, paintjob, arrangement of stowage,etc. are topnotch in my eyes. I'm in no way an allied armor expert, but this sherman looks awesome!! What od paint did you use?

     

  • Member since
    October 2007
  • From: N.H.
Posted by panzerguy on Sunday, July 20, 2008 10:12 AM

 

  Doog Wayne Dave 3rd placer Thanks for the comments guys.

  Dave I used model master od green sprayed over a base coat of flat black then highlited with a lighter shade of the od.

   Doog I here ya on the research thing. I've got loads of books on German vehicals but hardly anything on Allied ones,soon to be corrected by the wayWhistling [:-^]. Ive already decided to pick up another one of these kits and will be hitting the books and using 3rd placers WIP as a guide(just checked it out great job by the way). Strange thing though I never thought to much about the shermans but now I'm looking foward to my next oneApprove [^].

    

"Happiness is a belt fed weapon"

  • Member since
    January 2008
  • From: Bournemouth UK
Posted by Bodge on Sunday, July 20, 2008 10:36 AM

I like it its easy to make minor mistakes on tanks you not that familier with ,i done it with my recent sherman but its still a nice looking build.

I would just weather it a bit more especially the stowage.

  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in North Carolina.
Posted by disastermaster on Sunday, July 20, 2008 12:26 PM

 The image “http://www.countingcows.de/schaem.gif” cannot be displayed, because it contains errors. Other than the add-on armor plates, welds and the headlights, you've captured the "look". By the way, the spotlight on top of the turret needs a recessed lens added.

 The hedgerow device is super and the way you have the rigging going through the small eyelets on the support board on the front stowage is very convincing and innovative.

 Just as doog said, you obviously have the ability......  The image “http://img.photobucket.com/albums/v58/Honushi/smilies/neutral.gif” cannot be displayed, because it contains errors. you just need the books.

                                                                                                                DISASTERMASTER 

Sherman-Jumbo-1945

" I was so much older then I'm younger than that now "

 

 
  • Member since
    October 2007
  • From: N.H.
Posted by panzerguy on Sunday, July 20, 2008 12:53 PM

 

 Thanks D man. I'm actualy considering painting "Acid Test" on the side of this one and just putting it on the shelf as a " build and learn".

   ........oh yes there will be books!

"Happiness is a belt fed weapon"

  • Member since
    January 2008
  • From: Bournemouth UK
Posted by Bodge on Sunday, July 20, 2008 2:12 PM
Dont get dispondent , this is a nice lookin buildThumbs Up [tup] I would rather have a couple of minor mistakes and have a great lookin paintjob  like this one than a correct model in all details then have a cr*p finnish.
  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Tuesday, July 22, 2008 6:52 PM

Exactly.

Apprentice rivet counter.

  • Member since
    November 2006
  • From: Coastal Maine
Posted by dupes on Tuesday, July 22, 2008 7:37 PM

Not being a Sherman expert (not even close!) I wouldn't have picked out anything wrong...great build! Like all the upgrades you made, and the stowage is sweet. Thumbs Up [tup]Thumbs Up [tup]

Like you, I think I'm going to need to remedy my distinct lack of allied references. Heh. Whistling [:-^]

  • Member since
    July 2004
  • From: Texas
Posted by wbill76 on Tuesday, July 22, 2008 9:00 PM
Missed this one somehow, but glad I caught up to it. Shermans are like Tigers in a way...lots of particulars depending on the variant and timeframe being modeled. What I see with this build is you stretching out in a new direction and doing some great add-on and scratch work even if the subject itself is new, and that's always a good thing. Thumbs Up [tup]
  • Member since
    July 2006
  • From: New Jersey
Posted by redleg12 on Tuesday, July 22, 2008 10:46 PM

Highlight the positive....I LOVE the scratch work. fantastic stowage. It is a great build.

Remember...the last thing an explosive expert learns, kills him! No model is perfect but the idea is to achieve a good overall scale quality. That you did. As far as the details, it's not perfect.

Next time look on the internet or even better....ask here. Do a little more research and you will capure it all.

Nice work, looking forward to more good OD work from you

Rounds Complete!!

 

"The Moral High Ground....A Great Place to Emplace Artillery."

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.