SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

T- 800 Terminator

7821 views
34 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2007
  • From: Richmond, Va.
Posted by Pavlvs on Sunday, February 20, 2011 11:52 PM

Beautiful work!  Wasn't Arnold the Cyberdyne Systems model 101 and the Dennis Patrick Memetic Poly Alloy terminator the Cyberdyne model T-1000?  Maybe I missed a more updated Arnold model from the latest movie or the Sarah Connor series.  Does anybody make the Summer Glau Terminator as a model?

Deus in minutiae est. Fr. Pavlvs

On the Bench: 1:200 Titanic; 1:16 CSA Parrott rifle and Limber

On Deck: 1/200 Arizona.

Recently Completed: 1/72 Gato (as USS Silversides)

  • Member since
    September 2009
Posted by Cobra 427 on Wednesday, February 16, 2011 2:24 PM

Here's your  answer. This is almost at an end - I have two more alterations that I want to do before I post this to ebay.  I've now completed all the weapons for this, and all the build requirements. I'm going to alter Arnies' left eye a little to make it more realistic, and add some metal to Arnies' right hand, then this will be complete with no more alterations.  NEXT - Project X. Stay tuned!

 

 

This isn't a new project, but this is one that I was working on for another member of the forums. I spoke to him last in late August, and I haven't heard from him since. I must assume that he's no longer among the living, or his living situation has changed drastically. I was comissioned to build, and paint this back in March of this year, but I didn't think about altering this from the painted metal skeleton to actual aluminum foil until now in order to make this look more realistic.

The sculpt isn't perfectly smooth underneath since this was all done at the same time. However, this made it even harder to apply the metal sheet over it. I used Reynolds' wrap foil, and Elmers glue. I should've used the 3M spray adhesive instead. I just didn't want a big mess on my hands, and be forced to start over from scratch.  This only compounded the problem with trying to achieve a smooth surface even with brushes, and cotton swabs. The irregular surface, and space with the fragile foil made this a nightmare to get where I am on it now. I don't know if I want to change this by starting over one piece at a time with the 3M stuff, or just leave it as it is. After looking at this I want to change it, but I know how this will turn out. 

 

This is the shotgun that Arnie's supposed to be holding in his right hand, but I didn't know that when I built this kit. This rifle took me almost two weeks of off, and on building to allow paint to dry, and for parts manufacture. This is made from actual maple for the stock, and handgrips. They're decorated with steel sewing pins. The barrels are made from aluminum, and the lever is made from two paper clips bent around to shape with a styrene block superglued in between for the lever mount. The reinforcements are made from aluminum tubing that I cut with a tubing cutter, then cut in half. The round part at the backside, and the rest was flattened, and superglued along the rails toward the bottom, and front of the lever. I used a styrene pin to hold the lever in place - this allows it to move. I stained the wood to match the original prop, and clearcoated it with acrylic enamel clearcoat, then rubbed it to a dull shine. This even has the makers marks on the top left side with the logo on both sides of the breach/lock.  This entire thing is glued with superglue thick for assembly, except for the handgrips - this was done with Elmers' glue. It was the only thing that was thick enough to hold it in place while it dried.

I still have to get pictures figured out, so I can post them all in one spot. When this happens, I'll post the final build, and work in progress in this thread.  Thanks for looking.

                                                                    ~ Cobra Chris

 

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    April 2009
  • From: Carmel, IN
Posted by deafpanzer on Thursday, May 6, 2010 11:42 AM

I  L-O-V-E  IT!  It was a pleasure following your work.  What will you be doing next?  Another character from the Hollywood movies or somethinig like that?  It is always a nice break to see something other than WW2 figures. 

Andy

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Thursday, May 6, 2010 10:56 AM

I was waiting around till you finished to post again so I hope you didn't take it as lack of interest.

What can I say??? I'll second that I hope the guy is paying you well - professional job all around!

Again beautiful job and thanks for letting us see your progress!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    September 2009
Posted by Cobra 427 on Tuesday, May 4, 2010 11:13 PM

These pictures are just for example, as this is the background for the final photos I'll post. I just want to put a little more junk on the floor around Arnies' feet for a more dramatic effect. The sun was too bright for me to take a good far away shot without washing out the detail.


The backdrop was made from a series of squares that I designed on the computer, and printed up. I then glued these pieces of printer paper onto cardboard cut to fit these once glued to the surface. This is supposed to look like a diamond plate floor with a bunch of steel plated walls behind.  I painted it over with automotive primer to simulate dirt, and grime.

 

You can't really tell, except in person that I repainted Arnie in brighter chrome enamel paint. This makes him look more like a real Terminator made from stainless steel as opposed to just gray water based acrylic. It helps to look at him from all angles in bright sunlight to appreciate this effect.


The chain was for a toilet tank flapper valve that I cut down soley for this backdrop. The hook was made from a leftover piece of scrap that I cut from another project. It was already this round shape. This is what Bob Ross always called "A happy little accident", which inspired me to use it. I just bent the other end over to hold it to the chain. The aluminum tubing I used to hold this up went into another project that I'm currently working on.

None of these elements are meant to be sent with the figure, but are for another project altogether. I figured that this would do double duty, so I used this for taking photos of Arnie as if in a actual steel mill.

 

The laser eye was photoshopped for this effect. I didn't change it. I just wanted to see this with it lit up like the ones in the movie.

 

This is a few inches from the wall even though it doesn't look like it.

 


This is supposed to be the finished product. I took the grenade launcher out of Arnies' hand as this was only held on with masking tape. This kept falling out while taking these pictures. I finally got sick of repositioning it, and put it away. Some of these photos are posted out of order.

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Tuesday, May 4, 2010 5:22 PM

Thank you both for your compliments! I hope to inspire you to do the same should you want to make something complex from simple parts. I have a little more to show you all before this thread has come to an end.   

                                                                       ~   Cobra Chris

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    April 2009
  • From: Carmel, IN
Posted by deafpanzer on Monday, May 3, 2010 8:54 PM

Holy cow!  What a great tip about using the drill... never thought about it earlier.  Thanks for sharing!!! 

Andy

  • Member since
    September 2009
  • From: hamilton , Ontario
Posted by EliteModelling on Sunday, May 2, 2010 8:50 PM

amazing job and the the most  pictures i have ever seen on a post single post!

 

  • Member since
    September 2009
Posted by Cobra 427 on Friday, April 16, 2010 8:34 PM

deafpanzer

Ditto  I have been following your work since day one. Yes  I am surprised that this is not getting enough attention from the members.  Well, maybe we have one too many lurkers this time.  Just keep going and keep us posted! 

I thank you from the bottom of my heart! I know that this may sound silly to most of the senior members here, but I actually come back every so often to read comments in my threads. I love reading your reactions, as much as you guys like what you see! This means a lot to me. I love doing this, but without an audience, I'm preaching to the chior. My only guess is that there are three types of people that visit these forums. 

1: Those that participate, and love models, and all things model related ,and also want to further their hobby, and all those associated with it.

2: Those who would like to, but are intimidated by more experienced modelers, and are embarassed to admit they need help. This is detrimental to them sharpening their skills if they don't get involved, or bother to ask questions so that they can find out why someone is doing something a certain way. I know that there are a few that just post pictures without showing, or telling how they did it. I know - I too, am guilty of doing this myself sometimes!

3. There are those who either do, or don't build models, or scratch build, but drop in to see what's going on anyway. Some of these types are the ones that don't get involved, and just look at what interests them. They usually ooh, and ahh something, but don't log in, or leave a message.  These are also the ones that only admire from afar, and never get involved with anything on the forum, as they aren't usually members.  They'll say cool, or eh, and go on to something else. It's impossible to truly understand, or value all the hard work, and time involved in something like this project, as I can't show all the trial, and error going on behind the scenes.

The above only applies to those who've looked, but gone on to something else that they find interesting, or more interesting than this whether they be members, or not.  So for those members who have, please don't be offended, but be humbled as I'm more than happy to share this even with people who don't deserve to see it, or even those who do, and say nothing at all.

 

I've spent many hours planning this project as I go along with the mindset of " How can I make this more realistic", or "What can I do to make this a better, and more enjoyable build once finished. So that the customer feels that he got his moneys' worth, and will keep it, instead of selling it on because of something they don't like about it. I put my all into this build as I do with my own. I went above, and beyond the call of duty for this guy even though I don't know him, or ever met him.  This shows how much I love modeling, as well as helping those who aren't as capable as I am to paint something of this nature. I'm not an egomaniac, and I don't blow my own horn making a big deal out of what I've done. I let my work speak for itself.

 

The only thing that bothers me is the attitude of those who don't know what it's like to build something from raw parts, and have to rework what they've made, or start over from the beginning, even if it takes hours to do! Something like this that wasn't truly neccessary, but a unique opportunity to show what I can do, and make a truly realistic, and more enjoyable showpiece for its' owner. 

 I truly do appreciate all your compliments, and comments. That makes it a more enjoyable experience here. So the next time you see something that leaves you in awe, you like, or admire, and leaves you wondering how they did it - let them know! I love looking at what I've made, and thinking "WOW! I made this?"  Most don't know what this is like, or realise that this isn't really easy to copy something from the real world in a much smaller scale, but perfectly proportionate to actual item it's modeled after! I'm used to doing this, so it's not as difficult for me, as, it may be for someone starting out. I do make mistakes, but my experience limits them greatly. Although I still do make them from time to time. I correct them and go on. You can't expect, or ask for more than that!

 

 

In closing:  We all have reasons for doing what we do, but at the end of the day, I love to sit back, and build from whatever catches my eye, and create life where there was none before. This is my tribute to the modeling world, and its' also my way of giving my gift of art to the rest of the modeling community.  I'm not looking for popularity/fame, or to be the most prolific poster, or builder - just one of the very best. I may not post a lot of builds on here at the moment, but as soon as I have all the projects on my table finished, then I'll have more time for this.

 

                                     On with the show

Thank you all for your comments as well as those for looking. This isn't the last post ever, but very close. This is a special surprise I've held off making until today. I figured that since the "Hot toys" brand came with one, that I should make a grenade for this too. This needs a litte more work before it's done, but this is it in its' begining stages. I only made one, as I only have a little bit of styrene rod left.  I still have to take photos of the final product, but the paint needs to dry completely before I can wrap this for shipping.

 

Please compare the two different designs. The correct true to life version on the left, and the incorrect Hot toys version on the right.  I followed the correct version, as you can see below. Although I've never seen a real grenade with the elongated head like a .45 Cal. bullet as these have in the photos, but with the shorter head as my version has, I still modeled this after the one on the left because it is the correct color, and overall design.

                                                                No descriptions, just enjoy!

                                                                             ~ Cobra Chris

 


 
 
 

 
 
 
 
 


 

 
 
 

 

 

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Thursday, April 15, 2010 6:45 PM

Almost done people. This is the home stretch. I have to touch up the shock pad, or recoil pad as it's properly called. I made this one out of rubber last night. This, and the strap took me into today. The white line is supposed to be there, but this is wood filler. I used this to fill the gap between the butt of the stock, and the recoil pad. I have a tiny bit of touch up, and one more item to add to this, then I can call it done.


 
 
 


This was a cap for rubber tubing inside the engine compartment of a car. I cut the new one down, and sanded it with 32 - 60 grit. I smoothed it with 220 grit sandpaper to finish it before gluing it permanently to the butt of the stock. The only drawback to rubber is that it attracts dirt like a magnet.


 

 

This is the old styrene recoil pad. I removed this with pliers last night, so that I could fit the new rubber one for a more realistic look. To the right of it are clips, or "hoops" that didn't quite pass my quality assurance check. These were to be part of the strap, but I only needed one. I didn't know this as the time. These were bent to shape with a pair of needlenose pliers.
 


 

 


The strap itself is made from 0.05" printer paper that I reinforced with two layers, then painted them. This is called "camel colour" by the Daimler-Chrysler company. The inside looks white, but it's a very light creme colour. The strap adjusters are made of single ply printer paper, but painted the same colour before being folded on itself, and glued. The strap harnesses are made of styrene painted with gloss black enamel, and the hoop for other end is made from the same guitar string core that I used for the strap harnesses on the grenade launcher itself.

What all this means is that, the strap is adjustable, but I already adjusted it to hang comfortably from Arnies' arm. No more adjustment is needed. This strap is not made to come off. Roy, be very careful not to try to readjust this as it is delicate, and it will tear if not handled with the best of care. I couldn't use real leather, as it would be so thin that it would tear everytime I touched it! I didn't have anything else to make this from that would durable, and in the proper scale. It doesn't really matter, as I painted this with thick brush strokes to emulate leather texture to give it that leather appearance, and feel since it's only for display. 

No more descriptions tonight, people. Just enjoy while you can, this thread is almost at an end forever!


 


 

 

 

 

 

 



 

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Wednesday, April 14, 2010 1:50 PM

I thought that the stock, and the range finder where hard - the strap buttons,and their harnesses were the hardest part by far!!!! The harnesses are what I used the guitar string core from. This was a bass E string that was cut at the ball end for a Floyd Rose tremolo. This was new, and never used. A perfect candidate for this project.
 
I took the nickel wrap off this, and used the inner core, as it's not as hard as the sewing pins that I used for the strap buttons, and it wouldn't break like the pins would. Sewing pins only have a little give before they snap like plastic. They're tempered to be harder than a guitar string which is also tempered, but not nearly as much, since a guitar string needs to vibrate. The harnesses move forward, and backward, but the buttons holding them in don't swivel.
 
 

 


 
 
 

 

 

 

 

 

 

 

 


This is the part where I applied tape to keep the paint off it, so that I could get the glue to stick to the aluminum tubing permanently.


 

 


My range finder slides up, and down. I don't know if the toy does this, as I don't own one. Be VERY careful with this, Roy - I can't make another one without having you send this back to me, should this get lost somehow!


 

 

 


 

 


This is the begining of the anchor for the harness.


 


 

 

This is the full compliment of strap buttons, and harnesses.

 

 


 


 


 

 

NOW this looks like a miniature M-79.   Don't get too excited people, I still have to make the straps for both of these grenade launchers.


 


 

 

 


Lock back action that really locks.


 

 

 

 

 

 

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Tuesday, April 13, 2010 10:47 PM

Here're that last photos before I post the final product. This is the new range finder. I ended up making this entire assembly over, from the barrel mount on up.

 

I know that all these pictures look like the ones that I posted earlier, but this range finder needed to be straightened, so I had to make a new one. This is slightly smaller, and better than the first version I made. It's also more accurate to the actual M-79. This one isn't asymmetrical.

 

These are the parts after being freshly sprayed with gloss black enamel. I love the look of gloss, but this needs a dull matte finish to be accurate.
I rubbed these down with rubbing compound after they dried to give them that gunmetal look.


 

 

 


This is not an antenna, but it is the adjustment knob, and the tension adjustment screw. I still had to cut this off when I took this photo.



 

 


I forgot to shave this down before I glued it to the cherry stock. I started doing this when I took this photo. I had to sand, and shape this into a circle before I could paint it. Even though this was a work in progress at this time. Now it looks correct.

 


CHOO-CHOO!!! CHUG,CHUG,CHUG.......I'm sorry people - I couldn't help it, this looks like a choo-choo train engine.

 


These are the masking tape pieces that I used to hold these while spraying them with paint. I had to use new pieces each time to get them to stick without falling off when spraying them from different angles.

 


This is for size comparison.

 


The little white piece of styrene next to the grip is the pin for the lock to keep the trigger guard from coming off. I made three of these because the first two were angled on one end, and not perfectly cylindrical when I turned them.

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Tuesday, April 13, 2010 10:43 PM

Here's the latest. This is the range finder in it's finally completed form. I'll have to make another one. This one is too asymmetrical to please me. I only took pictures of this for example. At least you'll be able to get an idea of what this will look like once finished. No descriptions, just enjoy.

 

 

Arnie approves! You can tell by the cheesy fake smile, and teardrop. Sorry people, I did some photoshoppery to achieve this effect for humour.  This was intended to be the look of pride as a proud father doting on the birth of his little baby boy.

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Tuesday, April 13, 2010 10:13 PM

Thank you both for your wonderful compliments, they drive me to do my best, and improve upon it to get the maximum artistic expression that I can provide with the talent I've been given, and the skills I've developed on the way.  I would've posted this earlier, but I haven't been able to post here for the last few days since this site was down. I forgot about it coming back on yesterday, so here's the latest update since my last post. I have more progress, but I'm copying, and pasting, so this will take a little bit for me to edit correctly.

 

The stock Horizon kit was bland, but a very good base to build a great kit from. I just hope that everyone here will be able to achieve their dreams, one way or another. I'm glad you like what you see. This makes me happy.  After making this, the Winchester will be a breeze!


 

My cousin was in town to visit, and I showed him this. When I did, he said "You should charge a lot more for this". It's alright, I love making things. This wasn't a lot of work,or materials - just a lot of time, and thought doing it.

 

 

I figured out how to make the trigger guard accurately, and still keep it from falling off while retaining it's mobility.

 

This will be painted once I get the range finder made. All the hard work is done.

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    April 2009
  • From: Carmel, IN
Posted by deafpanzer on Monday, April 12, 2010 12:06 PM

Ditto  I have been following your work since day one. Yes  I am surprised that this is not getting enough attention from the members.  Well, maybe we have one too many lurkers this time.  Just keep going and keep us posted! 

Andy

  • Member since
    December 2007
  • From: Bridgeview, Illinois
Posted by mg.mikael on Sunday, April 11, 2010 11:32 PM

I think I'm in loveEmbarrassed........terminator and weaponry(probably has something to do with me being a die-hard fan). Seriously though Arnie looks fantastic, gotta love his exoskeletion and leather jacket. As for his weponry you have some serious scratching skills, 427 Cobra! I just love the detail your adding to both grenade launchers(beautiful stock and assembly on that 'Blooper" M79.)

All in all I gotta give you serious kudos for you attention to detail.....can't wait to see it all finished up!!Bow Down

"A good plan executed now is better than a perfect plan next week." - George S. Patton

  Photobucket 

  • Member since
    September 2009
Posted by Cobra 427 on Wednesday, April 7, 2010 9:08 PM

 I hope that you'll like this one too. I hate it, but that's only because I'm the one making this one piece at a time! It's tedious, but there is some of what I'm doing that's fun - just not all the sanding I've had to do to get the stock to where it is now.



 


The white bar next to it is the rail that I'm going to use for the hangrip under the barrel.  This is two pieces.


 


 

 

 

 


The flash in this photo was a lame attempt to show the true colour of the stock. The darkness makes it look real dark, but in good light - this is actually the same colour as the stock in the sample photo of the real thing. This is absolutely gorgeous in person with a nice satin finish, and that low gloss shine that makes this look very real! I was right to use cherry, as it's grain is just right to give this the correct sense of scale, and it's beauty is stunning for such a small piece. I'm not used to woodworking in this scale, as everything I make is much bigger.


 


 

 

 

 

 

 


Believe it, or not - this stock is comprised of 15 individual pieces of wood, and styrene. The hammer, and surrounding plate are two pieces, and the breach pin that holds the barrel down while firing is made of six pieces of styrene. The hammer surround is 0.40" thick, so I had to recess this for it, and the trigger while this was already finished in the medium cherry coloured lacquer finish.  I don't know why I even mentioned polyurethane in my last post, I never use it for anything but furniture. Where polyurethane came from is a mystery to me, as it's too soft, and doesn't give the convincing old time finish that real nitrocellulose lacquer does! This is what every manufacturer of guitars, cars, and furniture used before the advent of polyurethane in the seventies. The only exception to this was enamel on certain cookware, and polyester on Fender guitars in the late sixties.

The shock pad is supposed to be rubber, but I need something I can cut up that won't be missed, but I can't find anything here for it. This is made from three sheets of styrene. I still don't like the way it looks. I think I'll cut some rubber tubing I've had laying around for a while. As long as there's no nylon reinforcement in it, I won't have to sacrifice one of the bicycle tires in the shed that I got from a neighbor who threw a 15 speed away.



 

 


 

 

 


Fitting the rod that will hold these two halves together. This is designed to open like the hot toys version. This how the real thing opens. I realise that I could've just bought one of the rubber pieces of s*%t you usually see on ebay for a couple of bucks, but I want a quality grenade launcher that will match the quality of the figure it was made for. I want this build to be of premium quality, and not trash.

 
 

 

 

This is two pieces joined with a piece of styrene rod 0.10" around. I can't glue this even though I'd be able to, but in case this should break - I want to be able to replace it. I had to separate these again. I was just fitting these together before I finish the cherry half.

 

 

The trigger guard. This is ready to be painted, and put into place.

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Wednesday, April 7, 2010 8:24 PM

This is the stock in it's almost finished form. I've already shaped it, and stained it with a water based acrylic that I mixed to this colour. I applied a thin Minwax stain, the same stuff I used for the shotgun over this. I'll have to wait till the stain sets before I can clearcoat this with polyurethane.


I took a few comparison shots with, and without the flash. I didn't want the grain to wash out completely once I finish this.  Now if I just get rid of that damn yellow tint without photoshop!


I still need to make the shock pad, and glue it to the stock. This will happen after I fit the parts to this. I still have to drill the hole for the lock, and shave the inside for the trigger guard.  After I get all that done, I'll finish the barrel, and make the strap, and strap buttons.

 

Please feel free to compare the two finishes for colour match.

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Wednesday, March 31, 2010 5:02 PM

Here're the rest of the pictures that I promised earlier today.


 
 
 

 
I know that everyone's probably sick of seeing the same photos of Arnie, but I'm used to seeing him on top of my worktable. This is the only figure I've ever painted on it, so this makes it historically important to me. I'm going to miss Arnie staring at me every day as I post these photos after taking them.

It's going to be very difficult for me to package this up, and send it to you, Roy. He's become my constant companion watching, and waiting as I build all these weapons, and other things that I've been working on for the last three weeks. I've even caught myself talking to him, asking his opinion on the things I'm making for him, other things that I look at on the internet.

 I forgot the one thing that truly brings life to him - eyelashes. I painted these delicately, but you can't see them very well, but not having them only washed his features out in the flash. This makes him look more real, that and I forgot to paint the inner features flat black around the laser eye.

 

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Wednesday, March 31, 2010 8:56 AM

 


 I've been working very carefully on this, as there are parts that are easily broken.


 
 
 

 

The following photos are only an example of what this is intended to look like. This shows that this barrel was intentionally chosen for its' diameter, so that I can insert the rifling as this will be in scale with the rest of the figure.


 

 

 

 

 


This isn't going to stay inside the barrel, this is only to show that the grenades are in the correct scale.

 

 

 

The grenade heads after being freshly painted. These dried smoother than they look in this photo.


 

 

 

The beginnings of shotgun shellls.


 

 

 


 This what is called a reference shot, or continuity shot in the industry. These are taken to ensure that all the parts, or elements are in the same place from frame to frame while filming.  This helps ensure continuity of the film. I took this to show what this would look like with these with in front of Arnie, even though these aren't painted yet.

 


Painted, and ready for a closeup shot.


 

 

 


All the good photos of this that came out clearly are what I posted here. I had to delete the others, as they came out fuzzy. I'll more photos today when the light is better.
 


Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Monday, March 29, 2010 9:09 PM

In the meantime, I'll entertain your thoughts as to whether grenade launchers really exist, or not. This is the real thing - in the steel.

 


This is an M-79. This is what our boys used in Vietnam against the northern VCs'.

 


Here's the toy that I wish I could copy, but I'll just have to measure the real thing to see what proportions the parts are from each other.

 


This is the hot toys version of the M-79 that Arnie actually had in the movie. His shot gas grenades.

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Friday, March 26, 2010 10:12 PM

Gamera

Wow! Despite your questions about the skin tone it looks like the spitting image of Arnie to me. And the special paint on the leather looks great!

Thank you! This was a neccessity. If you could see how the two colours compare, you'd see that this was needed desparately to make his skin look like he was actually alive. The camera changes the colour considerably in some photos, especially ones with the flash turned on. It also makes Arnie look wider than he is in person. When you see him on the table, he looks very thin, but on my 19" inch monitor he also looks a little wider.

The paint I used for the leather is supposed to be sprayed thick, as this causes it to wrinkle. I used it to make this easy to replicate the look of leather because it has a thick body that causes it to be more resistant to drying, so I can rub this lightly while still wet with a paint poslishing compound that will actually dull its' appearance, and give it the dull gray look that real leather has to it, but isn't noticable, except from closeup.  This was sprayed very thin, and fast to keep the paint from actually wrinkling the way it was formulated to. You can do this, but only once, and in thinly sprayed layers, as this paint wrinkles once repainted over.  

Thank you guys for your comments, and your compliments. I appreciate your insight! All others are welcomed. Questions, comments, compliments are always welcomed, as this makes me feel that I'm not wasting my time.

 

 This picture is out of order, but I wanted to show the leather like grain this has. This was painted from a spraypaint can very carefully. This is formulated to make much bigger wrinkles than this. I had to do this lightly to keep these lines in scale with this figure.


 
 

 

In the home stretch. This is almost done, but the trigger guard still needs to be attached to the grenade launcher tube.


 


 

 

 

The tab at the bottom of the barrel is a strap mount. There's another one at the other end.  There are small grooves in each one that I drilled with a 0.15" Thousanths of an inch drill bit in a straight line until I could cut through each hole to the one next to it. These are intentional. They keep the strap taut.

 

 
 

 

This is the curvature of the handle that I sanded into it.  I wanted to show this before I permanently glued it to the rest of the grenade launcher.


 

 

Another shot. This is a closeup, and it's the best I can get with my camera at the moment.


 
 

 

The light is weak with this one. This looks brighter in person that it does on film.


 

 

 

I know that these look the same, but they're the finally finished form with no further touchups neccessary. I applied clear gloss coat to the areas that are supposed to be red, and wet, and this is dry in the areas where it's supposed to dark, and dried blood from being so thin. The shirt has a wet look around the open wound as a real shirt would. I did this by rubbing my hands over it with a little gloss coat to make it look damp without looking glossy. All the open wounds, and even Arnies' left eye have gloss coat to make it look evermore realistic. I just need to add a little black washcoat to resemble eyelashes. I glued the gap between the jacket,and the pants in the back to add structural integrity. This is by the beltline where no one will ever see,and by the pockets. This can't be seen from the top,or the sides.


 

 

 

THE JEWEL OF MY EYE

 I wanted something that would look like a true Terminator eye,but I didn't want to route a wiring channel with an aircraft drill bit through one of his legs. I thought that this needed something that would be durable, and not have to be serviced like a fibreoptic, or need batteries, or possibly burn out like an LED.


 
 

 


This is a rhinestone that I superglued to a styrene rod, then shaved down with an emeryboard while turning it on a drill. This ensures perfect symmetry.  I was lementing how I could've used these at the time I was at the local sewing store, but I was there to buy materials for another project that is on the backburner for now. When Roy consigned me to do this, I remembered these, and went back to the sewing store, and bought a box of over 100 rhinestones. These came in multiple colours, red,blue,light blue, green, gold, yellow, purple, white, and pink.  OOOOOOHHHHH pretty!!!!

I wet sanded this with 320, and 600 grit wet-or-dry sandpaper. Then I buffed it with Brasso, and plastic polish to make this shiny.   I originally thought of making an eye of each of these colours, but it's very difficult to insert this eye as it is to remove it. I permanently glued this in so that it won't fall inside his head when handled. Arnies' head is hollow inside,but this doesn't make it easy to retrieve, or insert without a lot of difficulty.  This works perfectly in bright light, as this is made from chrome backed solid red acrylic.


 

 
 

 

I waited to show this last, as it was to be a surprise. This is the first thing I did when I got this figure,even though I'm showing it last. This was the only modification to this figure, but a highly neccessary one! This wasn't polished yet, as I was only testing the fit before deciding whether this needed more work, or not.


 

This a chip out of the back of the jacket from the fill plug. Someone tried to fill this with woodfiller before I got it, but an edge like this isn't a place where this stuff will be durable. I replaced it with superglue, and baking soda. This makes a rock hard mixture.


 

 

I sanded this smooth after giving the entire figure a hot soapy bath in antibacterial dishsoap to remove finger oil, and mould release agents. I sanded this down with 320, and 600 grit wet-or-dry sandpaper. I then took my Exacto blade, and shaved the edge of it, then I made a couple of small creases to match the rest of the jacket for a seamless repair.


 

 

This is what I used to recreate the yummy gooeyness that covers the red bloody areas.


 
 

 

This is a lot harder to see the detail on now. This is only the initial coat of primer. I sprayed this to see any tiny imperfections that I need to remove before I can call it done. But, it doesn't matter, as this is the wrong damn grenade launcher.  I'll have to make a new one, unless you want this one anyway, Roy.   At this point in time I still have yet to glue the grenade heads onto the canisters, and attach the strap.


 

 

 

 


 

 

This is the correct one. Forgive the poor quality of this picture - I stole it off ebay too! Now that I don't the video, I have to resort to all kinds of ridiculous means to exemplify my intentions.  Look closely, and you'll see that this is what was actually used in the movie. My version is based off a military grenade launcher - the kind that shoots explosive grenades.

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Friday, March 26, 2010 2:20 PM

Wow! Despite your questions about the skin tone it looks like the spitting image of Arnie to me. And the special paint on the leather looks great!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    April 2009
  • From: Carmel, IN
Posted by deafpanzer on Wednesday, March 24, 2010 10:41 AM

Nice work especially the weapons!  Amazing... thanks for taking your time to post your work.  I am sure that guys enjoy looking at your work but they don't have anything to say. 

Andy

  • Member since
    September 2009
Posted by Cobra 427 on Tuesday, March 23, 2010 10:55 PM

Thank you, Rick. I'm glad you've enjoyed looking at this. This was a learning curve, not for me in building, or painting,but in patience. I had to wait for a lot of the paint to dry, but mixing it was the worst. I got into a hurry in some places, and had to start over to make this the best representation of the real thing as much as I could.  I didn't have doubts about my abilities as I did in making this accurate.

 I had the video of the movie,but someone whom I live with gave it to the neighbors as a gift.  Now I have only memory to guide me. This is why I had to repaint. The skin looked right in sunlight, but it was too dark in artificial light. As it dried it became darker, and darker until it no longer looked like it originally did when I first painted it. I also noticed the pictures are a little wider than this actually is in person. Why is a mystery to me, as it also makes the colour a little off, especially when I don't use the flash in artificial light. 

 Either way, this was a true labour of love, as I want to be happy with the end result. I know that if I like it, the owner will like it too! I also know that once I'm satisfied this will be one of the most enjoyable models it's owner will have in his collection. I want this to be as perfect as it can be.

Thank you again for looking. and for your comment. Now I don't feel like I'm talking to myself.

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    May 2007
  • From: Atlanta, Georgia
Posted by RTimmer on Tuesday, March 23, 2010 6:12 PM

Incredible build log - thanks for sharing!

Cheers, Rick

  • Member since
    September 2009
Posted by Cobra 427 on Monday, March 22, 2010 9:44 PM

                                                                 "IT'S NOT A TUMOR"!

 


This isn't officially done yet - it still needs some touch up on the silver parts, and in between the body and legs. There's a small gap where the two meet from where the owner separated them after he glued them together. This was done for shipping reasons. This is only superglued from the very front edge. I wasted all that time, and superglue filling damage, and sanding it ultra-smooth so that the top, and bottom would fit perfectly. The problem is that there's no edge on the back of the jacket to glue to! I'll probably add some white Elmers' glue to this to strengthen the bond.   These shots are only a tease for right now to show that it's done,but I need to take some actual beauty shots of this, so that I can edit out the background for a portfolio.


 

 

This picture is just to give you all a loose interpretation without any closeup detail. This is just to inspire confidence in my abilities, and to show that this is finally finished, and ready to be wrapped for shipping. That will be just as difficult to do as painting this was. I'll have to package this so that it will arrive in perfect condition without paint rubs, or parts broken off. I'll post beauty shots when I take them. I took these photos ten minutes before I posted them on the other site I copied these from. This was before dawn. It started raining right about the time the sun came up, so I guess I'll have to wait until tomorrow.

 


This is not my photo,but I swiped it from ebay. I'm only using this as a reference for the shot gun. This is what Arnie used in the beginning of T2, but the one I made is what comes with the kit when new. This is correct for what he used at the end of the movie.  I originally thought that this was a recast because it had some parts missing, but this is made from polystyrene. This is HARD plastic compared to the urethane stuff everyone is using. The owner said this is an older version. The ones I've seen on ebay now are all light gray vinyl. 

 Either way, this is very cool kit,and I never thought of buying one, even after I saw these in the stores. The box is horrible! They should take pictures of " Coffee Addicts' " and put them on the box - I know that sounds egotistical,but this one really looks a lot better in my personal opinion. It at least looks more realistic. This is much better looking in person than any picture I can take with my camera.

There's no detail that I've left unattended. From the paint to the parts - I made sure that I earned my pay for this build. It needs to look REAL- not real fake!

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Monday, March 22, 2010 9:41 PM

This is what I do, and it's what I love. As you can see, there isn't anything that can't be scratch made. Painting is a little bit harder, as I can't control much more than its' application.  Here're a few sneak peek photos. Today is the unveil of the final product in its' finished form.  Enjoy!



 

 

 


 

 

 

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

  • Member since
    September 2009
Posted by Cobra 427 on Monday, March 22, 2010 9:37 PM

I superglued this so that I can mate the two halves together smootly. I still have to sand the rest of this smooth since I added a little more after I took this picture.


 

 

The raw frame.



 

 

The begining of the grenades. This entire unit will be painted first, then I'll paint the heads of the grenades, and glue them on afterwards. This will make it easier for me. This way, it won't make a mess painting the two colours on two different surfaces.


 

 

                                                        FLOWER POWER 


 

 

 

 

This is a sample grenade. This is so that you can see how long these usually are. The emery board got wet, and the stain from it got onto a couple of the grenade canisters. I'll have to sand that out. I think I'll even make a few shotgun shells to lay around Arnies' feet for a more realistic effect.


 


 

 

 

 

 

The prototype fitting of the parts.


 


 


 

 

A better look at the final fitting of the pylon,trigger, and handle. This just needs the trigger guard, end caps, and grenade heads attached before I can call it finished. I'll paint this without the grenade heads, as they're the only thing that will be differently coloured from everything else, and will be glued on last.


 


The trigger guard,and handle beside the sample grenade.


 

 

The belt ends.

I didn't find these in the bottom of the box - I made them from styrene that I cut into strips,and bent the hell out of.  Then I drilled three 0.15" of an inch holes into one, and made a buckle for the other side. I scraped the edges so that they'll match the original belt on the jacket. I'll rub the paint on these to match the jacket surface once it dries. Then I'll paint the buckle so this will look realistic.


 


The buckle looks like there's something hanging on the left side, but this a spot of wet paint that was on the tape when I took this picture.

This is made of two pieces. One that I bent a 0.20" styrene rod into a square joined in the center on one side, and the other part is made from a 0.15" styrene rod. I bent it over, then I glued it to the square in two places, so that this will look like a real belt buckle. This is all superglued together. I can't wait to get this glued to Arnies' jacket, but this will have to wait, as this is the same paint I used on the jacket, and it'll take a couple of days to dry enough to be handled.

Maybe a picture of a squirrel playing a harmonica will make you feel better?

 

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.