SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Scout Trooper WiP

4554 views
37 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2007
Posted by BigtTodd on Monday, August 4, 2008 8:14 AM

Great job!  Bow [bow]  

Thank you for sharing your WIP. It has given me a boost to continue my project.

 I am in the process of resculpting my trooper (regular sitting position.) Some of the oversized details have been carved down or "sharpened up" with an exacto blade. I have cut a lot of the bad details off and filled them in with epoxy putty. I also had to sand down the boots and had to figure out how to carve new folds. So I understand what you are going through.

 I have cut the helmet off and replaced it with new head. My plan is to pose the figure lifting the helmet as if they were putting it on.

 Looking at the limited photos of a reinactors and notice that there are huge differences to the model. The model looks really bad in comparison. I am stuck trying to figure out how to make a new one. Did you bulid a new helmet?  Do you have any suggestions?

 Thanks again for sharing

Todd

  • Member since
    December 2002
  • From: Connecticut, USA
Posted by Aurora-7 on Friday, August 1, 2008 3:53 PM
Great concept and excellent work.

 

 

  • Member since
    January 2006
  • From: Baton Rouge, Snake Central
Posted by PatlaborUnit1 on Friday, August 1, 2008 11:57 AM

man i wish i had your sculpting talent. when I try to make a hand it comes out really blobular!

 

Looks great!

David

 

Build to please yourself, and don't worry about what others think! TI 4019 Jolly Roger Squadron, 501st Legion
  • Member since
    July 2008
  • From: PBG, FL
Posted by John31388 on Friday, August 1, 2008 11:23 AM
Looks really cool man
  • Member since
    February 2008
  • From: Kingston, Ont. Canada
Posted by Schweinhund227 on Thursday, July 31, 2008 10:12 PM
It's  LEFT HAND TIME !!!

After making  a small armature...  out of Guitar strings... Cuz !  That’s what I had on hand ! I am sure any other types of wire would do !!!!



I used a small Brass tube more or less 5mm in length..  and loaded it with 5 guitar strings more or less the same length  as I didn't know yet which would become what finger... till the glue had Set !



I then kneaded some Appoxie Putty and made some small rolls which I impaled on my strings... and roughly sculpted into a somewhat believable finger shape....



I am satisfied with the first results... but it still need to fully cure before I can carve or tweak the fingers...  the Guitar strings are there to act as support ! Putty alone could be very brittle... if Knocked against something.

Vaseline sure help Keeping the Appoxie to stick to everthing ....



It's Not Rocket science !!!   I am Happy that my New Twist on the G.G. figure is getting somewhere....    Next I need to learn to add Pleats on Leather boots..  I am trying to go all out on this one...  it's a good learning tool !!!

Take care All....  
  • Member since
    July 2008
Posted by Beowolf47 on Monday, July 28, 2008 12:41 AM
I like your work there, nice approach.
  • Member since
    February 2008
  • From: Kingston, Ont. Canada
Posted by Schweinhund227 on Sunday, July 27, 2008 6:40 PM

Had time to work a little on the Relaxed Scout !!!

I was able to secure a Threaded Wood Insert Nut in his "Left Butt Cheek" and while this was Setting in Appoxie Putty I made sure to cover the Seat with Vaseline to prevent the Putty to stick everywhere... and give me a good Seat impression in the Scout's Gluts.

I only had to drill a small hole.. 1/4 of an Inch into the seat and accessed the Screw head by the Bike Stand circular part under the bike which I drilled out ! the Rod inside the Scout's Left Leg is now Supporting the entire Vignette. and it's pretty cool !!! to see it come alive !

I will use a small piece of Styrene once I am done ... to plug the hole... on the Bike's Belly! something I can remove easily in case I need to dis-assemble the Model for transport !

So far I like Where this is going !!!!

I only have a small Picture of it.... in Hover Mode... the Legs and Gluts still need to be Refined and all the nice wrinkles and Pleats added to suit the Stance... WiP pictures always shows the good and bad about a project !

Right now; I am Sanding down all excess putty to a smooth finish; So I can start on a clean slate !

I also added some Appoxie Putty to the stomach area and Kept it Back by 2 or 3 mm in order to have yet another clean base to add the Cummerbund pleats... and give him a firm six Pack !!!

I till have to redo the left arm completely .. Just so I can have a Good One Piece arm to add to the figure...

Here are some pix !

and Pardon the Messy bench !!! Am'IBad

  • Member since
    January 2006
  • From: Baton Rouge, Snake Central
Posted by PatlaborUnit1 on Wednesday, July 16, 2008 10:21 AM

I like it!

need captains rank on the helmet :D

 

David

Build to please yourself, and don't worry about what others think! TI 4019 Jolly Roger Squadron, 501st Legion
  • Member since
    February 2008
  • From: Kingston, Ont. Canada
Scout Trooper WiP
Posted by Schweinhund227 on Tuesday, July 15, 2008 11:34 AM
I took some of my Rejected Castings and Played Dr. Frankenstein and using some Copper Wire...

I tried to MIMIC the GG Stance...

Since I don't have the Cash to Fork on a Pre-made Statue... I decided to try getting a similar Vignette using my 1/11th  Scout !  and AMT bike

I have lots of work cut out for me..   Sculpting New Legs... and New Boot Soles.. and changing the Left Foot to match the new Stance...

Still don't know if I will have him Hold his Blaster or maybe a New Sniper Rifle !!!   time will tell !

I also corrected the Torso Armor plate  front and back... but still have to build up the Neck and correct the outline of both shoulder straps .. More on that later...

I cut off the Breathing apparatus from his Back and Brought it up by almost 5mm  and reshapped the lower back to match photos I've got !   once that is done  I will make a New Casting and refine the Resin casting to enable me to attach the arms and the New Waist (Hips) I am also changing to HOST a long Nut  to enable me to Screw in the Bike from underneath so simulate HOVER !!!



Catch you all on the Flip side !!!

http://i170.photobucket.com/albums/u255/schweinhund227/SpeederBike/DSC04127_resize.jpg
http://i170.photobucket.com/albums/u255/schweinhund227/SpeederBike/DSC04133_resize.jpg
http://i170.photobucket.com/albums/u255/schweinhund227/SpeederBike/DSC04148_resize.jpg
http://i170.photobucket.com/albums/u255/schweinhund227/SpeederBike/DSC04141_resize.jpg
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.