After a long month beginning and a holiday, I finally got some work in the model. Still assembling the hull. I glued the rear deck and the others spopnson that had not yet done. To my misfortune, I discovered that I mounted a wrong platform, and now I can not glue a diagonal beam supporting the upper deck. I had to take off the flat piece of the base platform and then paste the opposite side. I had to glue, fill gaps and I have to paint again. In the end, will be good.
Rear platform:
Something very strange is happening with the painting when I "unmask" the pieces, where a tape over the other, a line was clearer. I'll have to paint again. The paint, in general, are not adhering well to the kit.
More a small platform:
Diagonal beams supporting the upper deck:
One more:
I stuck to dark gray platform unlike
Half an hour after removing super glue and sanding, I need to fill the gaps, sand and paint again:
It was because of this beam that I discovered the fitting wrong sponson:
The last two small platforms, and the right made by me, because I lost one of these little pieces. I nedd to fill gaps before paint.
From this and the previous day was clear that the detail in from the plastic kit, resin and PE will have to be assembled later.
Overall, I have to fill some gaps, sanding in order to paint.
That's it.