SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

IJN Battleship "Mutsu" 1:350 full option

22370 views
37 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2003
  • From: Thailand
IJN Battleship "Mutsu" 1:350 full option
Posted by Model Maniac on Tuesday, November 2, 2010 9:05 AM

Hasegawa's IJN Battleship "Mutsu" 1:350 w/ full option PE/brass upgrade kits - by "Niphon":

There are 30 more images in my latest page:

http://www.falconbbs.com/model56c.htm

Have fun!

Impressive Songs:

All 10 Playlists that I created on Youtube:

http://www.youtube.com/user/ModelManiacThailand/playlists

Pan Flute Music (300 songs) (Most Popular, over 100K views):

https://www.youtube.com/playlist?list=PLUNb2zPxGTZO7alagEPsEMzgBkWt4-vKV

El Condor Pasa (Top 50) (World's most famous and my most favorite song):

http://www.youtube.com/playlist?list=PLUNb2zPxGTZOLKHbju350mLle4HkMhsb8

  • Member since
    February 2009
  • From: Klaipeda, Lithuania, Europe
Posted by Wojszwillo on Tuesday, November 2, 2010 9:18 AM

Not bad, i.e. good :-).

But 2 things:

1) rigging with rugged thread is not best possibility (you can use e.g. black or dark grey colored fine fishing line;

2) it seems, that grey colored plastic is'nt painted at all - and it looks like plastic.

But anyway, looks good.

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Tuesday, November 2, 2010 9:29 AM

Looks like a very good clean build. I would have used a nylon smoke thread in .003 or .004 intead of the fuzzy one used for the rigging. The nylon thread looks like steel cable in that scale. Also a nice wood base will add even more to the build. Don't know if its the angle or even if it's supposed to be there, but it looks like a large gap where the superstructure meets the deck on the 4th picture.

 

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    September 2010
Posted by potchip on Tuesday, November 2, 2010 9:33 AM

Great effort. The PE application is very tidy. Other than those already mentioned by the previous posts, the ensigns are not quite correct. It's either at the bow, or the stern (and probably not that particular one at stern), or at the mast.

  • Member since
    September 2005
  • From: Groton, CT
Posted by warshipguy on Tuesday, November 2, 2010 11:44 AM

Overall, nice job.  However, I have used Testor's putty to fill the CAD lines that Hasegawa left on the hull.  Testor's has a relatively fine tip on  the tube, making it a neater job to fill those lines.  I remember someone once mentioned using whiteout with good effect in an earlier thread.

Bill Morrison

  • Member since
    February 2003
  • From: Thailand
Posted by Model Maniac on Tuesday, November 9, 2010 8:52 AM

Thanks so much for all kind responses and suggestions! I really appreciate them!

 

Wojszwillo, 

1) Agree. I think "Niphon" is not familiar with the fine fishing line. I don't know whether it's available locally.

2) You should look closely. It was not only painted but also weathered!

 

plastickjunkie, one reason the threads look fuzzy is the time it took to build this one and this one alone - from 1 Apr 2009 to 31 Oct 2010. That's a year and seven months straight. Dust had so much time building up on them. Between the .003 or .004 nylon and finest copper wire (I don't know its diameter but it's very fine), what do you think is a better choice?

A wooden base may be better, but it costs some bucks and the provided base will not be used. And that's a waste! I see no gap in the 4th picture.

 

potchip, I'll have to look for the meaning of 'ensigns' to know what part you mean.

 

warshipguy, I see nothing wrong with those lines. They represent seams between iron plates, don't they? Tamiya's Yamato 1:350 doesn't come with these lines, I remember my other modeler scribed them up which is above and beyond the call of duty.

Impressive Songs:

All 10 Playlists that I created on Youtube:

http://www.youtube.com/user/ModelManiacThailand/playlists

Pan Flute Music (300 songs) (Most Popular, over 100K views):

https://www.youtube.com/playlist?list=PLUNb2zPxGTZO7alagEPsEMzgBkWt4-vKV

El Condor Pasa (Top 50) (World's most famous and my most favorite song):

http://www.youtube.com/playlist?list=PLUNb2zPxGTZOLKHbju350mLle4HkMhsb8

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Tuesday, November 9, 2010 8:58 AM

Truly a piece of art,beautiful build,thanks for posting.

  • Member since
    April 2005
Posted by ddp59 on Tuesday, November 9, 2010 4:19 PM

gap at base of forward superstructure near the back. those engraved lines on the hull are not hull plates but a screwup when converting to cnc machining. ships like houses are not built like that as there is no cohension\strength which is why they are always staggered. 

  • Member since
    October 2010
Posted by sumter III on Tuesday, November 9, 2010 10:04 PM

Great build, and I know what you mean about time to build.  I've been working on the same ship for 6 months now.  As far as the hull goes, most of the best builds I have seen have lessened the "excel spreadsheet" look with putty.  But that is not to say the plates did not stand out.  And the rigging on this, is one of the most daunting I have ever seen for a battleship.

Take a look at this site for a close up view of the Nagato.  The plates on many of the IJN ships were more pronounced than some of the others navies.

http://www.tt-fleet.com/smf/index.php?page=42#Nagato

 

Nice Job, now I can't wait to start on my Nagato!Yes

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Tuesday, November 9, 2010 10:28 PM

[quote user="Model Maniac"]

Between the .003 or .004 nylon and finest copper wire (I don't know its diameter but it's very fine), what do you think is a better choice?

A wooden base may be better, but it costs some bucks and the provided base will not be used. And that's a waste! I see no gap in the 4th picture.

 

 I'd go with the .003 nylon thread. Very easy to work with and attach with CA. Wood bases are inexpensive. Just need a couple of brass or wood finials as attachment points and some stain for the wood.

Again, looks very nice.

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    March 2004
  • From: Spartanburg, SC
Posted by subfixer on Tuesday, November 9, 2010 11:42 PM

"Ensigns" is another word for flags. The cad lines are really an unfortunate accident but they shouldn't be made worse by being made more pronounced by having a wash applied to them. The searchlights need lenses.

 

This is an excellently done piece. My compliments to the builder, he couldn't have known about those cad lines on the hull that were not supposed to be there.

I'm from the government and I'm here to help.

  • Member since
    February 2003
  • From: Thailand
Posted by Model Maniac on Wednesday, November 10, 2010 9:41 AM

anthony2779 - Many thanks for your kind compliments!

 

ddp59 - I still don't get it about the gap. Can you locate it in the picture? As for those engraved lines, 'subfixzer' has suggested that the builder "couldn't have known about those cad lines on the hull that were not supposed to be there", and that's the case.

 

sumter III - Thanks so much for your kind words! You've been building this one for 6 months?, how many more months do you think it will take? I have seen your pictures of the real Nagato, I think it's OK not to do anything with those CAD lines because the real ship seems to have that same lines. But why will you build both the Mutsu and the Nagato when they're in the same class? Wouldn't it be better to divert your resource to building other ship such as Akagi?

 

plastickjunkie - Many thanks for your answer. I believe you and I've already asked my brother to buy .003 & .004 nylon wires for me from shops near his office. Using a wooden base and brass or wood finials means that you'll have to drill two big holes under the hull, right? That may not be easy job, and I think the ship is more secured sitting on its own base - the one provided in the box - than on two poles (your finials). 

Thanks again then!

 

subfixer - Thanks for the meaning of "ensigns". So the flags are at the wrong places? I don't know whether the instruction sheets suggest the points to put the flags or not. But I think it should, and the builder has followed the instructions. As for those CAD lines, I saw the real ship in the same class and it also has them. So I think there's no problem with them. 

 

Thank you very much for your kind compliments on the build. You're right that "Niphon" couldn't have known about those CAD lines. I didn't know either!

 

The next three ships that I'll show in a row will be 

1. Academy's Admiral Graf Spee 1:350 (Premium Edition) (#1)

2. AFV Club's U-Boat type VIIB + Voyager's PE Upgrade Set 1:350 (#1)

3. Revell's U-Boat type VIIC 1:350 (#1)

(#1 means 1 of 2 - I bought these three ships two each, crazy?)

They're being built by another modeler named "Toom". I hope he'll deliver them this month or next.

Impressive Songs:

All 10 Playlists that I created on Youtube:

http://www.youtube.com/user/ModelManiacThailand/playlists

Pan Flute Music (300 songs) (Most Popular, over 100K views):

https://www.youtube.com/playlist?list=PLUNb2zPxGTZO7alagEPsEMzgBkWt4-vKV

El Condor Pasa (Top 50) (World's most famous and my most favorite song):

http://www.youtube.com/playlist?list=PLUNb2zPxGTZOLKHbju350mLle4HkMhsb8

  • Member since
    November 2010
Posted by Firedeck on Wednesday, November 10, 2010 11:06 AM

NICE build Maniac.  We can see the time and patience invested in this project and you should be justifiably proud. I myself  am in the midst of a rebuild of 1/350 Tamiya Yamato with the new LionRoar set (unbelievable how many parts in that upgrade, sheesh) and the time required for completion can be rather daunting.

I have the Hasegawa Nagato up next on the bench (also with the associated LionRoar set) and so found your post and pics very interesting and timely.

Well done.

 

  • Member since
    September 2005
  • From: Groton, CT
Posted by warshipguy on Wednesday, November 10, 2010 1:00 PM

Actually, those lines engraved into the hull moldings do not represent hull platings; they are the CAD lines used by the kit's design team to design the parts.  The lines should have been erased from the design. As a result, they are molded into the hull parts in error by Hasegawa.  They should be filled in.

Bill Morrison

  • Member since
    November 2005
Posted by Anonymous on Wednesday, November 10, 2010 1:37 PM

warshipguy

Actually, those lines engraved into the hull moldings do not represent hull platings; they are the CAD lines used by the kit's design team to design the parts.  The lines should have been erased from the design. As a result, they are molded into the hull parts in error by Hasegawa.  They should be filled in.

Bill Morrison

Should be an easy fix with a little putty...

  • Member since
    February 2009
  • From: Klaipeda, Lithuania, Europe
Posted by Wojszwillo on Wednesday, November 10, 2010 4:29 PM

1)

Black color fishing line:

http://www.mikado.pl/catalog/zylki_i_plecionki/zylki/feeder/

She is 0,2 mm tick i.e. 0,0079''

There are and 0,06 mm tick fishing lines, i.e. 0,0024''

2)

I saw weathering, but have tought that grey plastic is leaved without painting.

Sorry, if I was mistaken.

  • Member since
    March 2004
  • From: Spartanburg, SC
Posted by subfixer on Wednesday, November 10, 2010 5:34 PM

Model Maniac

 

 As for those CAD lines, I saw the real ship in the same class and it also has them. So I think there's no problem with them. 

 

Thank you very much for your kind compliments on the build. You're right that "Niphon" couldn't have known about those CAD lines. I didn't know either!

 

You saw the other ship in the class? That is pretty amazing, I didn't know you were a diver. The other ship in the class with Mutsu  was Nagato which was sunk by an atomic bomb test in Bikini Atoll.

I'm from the government and I'm here to help.

  • Member since
    April 2003
  • From: 41 Degrees 52.4 minutes North; 72 Degrees 7.3 minutes West
Posted by bbrowniii on Wednesday, November 10, 2010 6:36 PM

Model Maniac

 As for those CAD lines, I saw the real ship in the same class and it also has them. So I think there's no problem with them. 

 

You certainly didn't see those lines on the 'real ship in the same class'.  Wartime photos of both Nagato and Mutsu are pretty clear - those lines are not there.

It's a nice build, but don't try to blow sunshine up our skirts - and why should you, it isn't your builders issue, per se, it was Hasagawa that screwed this up...

'All that is necessary for the triumph of evil is for good men to do nothing' - Edmund Burke (1770 ??)

 

  • Member since
    August 2005
  • From: Mansfield, TX
Posted by EdGrune on Wednesday, November 10, 2010 6:38 PM

subfixer

 

 Model Maniac:

 

 

 

 As for those CAD lines, I saw the real ship in the same class and it also has them. So I think there's no problem with them. 

 

Thank you very much for your kind compliments on the build. You're right that "Niphon" couldn't have known about those CAD lines. I didn't know either!

 

 

 

 

You saw the other ship in the class? That is pretty amazing, I didn't know you were a diver. The other ship in the class with Mutsu  was Nagato which was sunk by an atomic bomb test in Bikini Atoll.

Is it me or did the BS alarm just go off

  • Member since
    April 2003
  • From: 41 Degrees 52.4 minutes North; 72 Degrees 7.3 minutes West
Posted by bbrowniii on Wednesday, November 10, 2010 6:44 PM

EdGrune

 

Is it me or did the BS alarm just go off

So loud, it made my ears bleed.....Super Angry

'All that is necessary for the triumph of evil is for good men to do nothing' - Edmund Burke (1770 ??)

 

  • Member since
    September 2005
  • From: Groton, CT
Posted by warshipguy on Wednesday, November 10, 2010 7:40 PM

Manny,

I used Testor's Putty to fill in those lines. The fine-tip nozzle helped make it an easy task.

Bill

  • Member since
    February 2003
  • From: Thailand
Posted by Model Maniac on Wednesday, November 10, 2010 8:28 PM

Firedeck

NICE build Maniac.  We can see the time and patience invested in this project and you should be justifiably proud. I myself  am in the midst of a rebuild of 1/350 Tamiya Yamato with the new LionRoar set (unbelievable how many parts in that upgrade, sheesh) and the time required for completion can be rather daunting.

I have the Hasegawa Nagato up next on the bench (also with the associated LionRoar set) and so found your post and pics very interesting and timely.

Well done.

Thanks, Firedeck!. As for the Tamiya's Yamato 1:350, I built one myself long time ago out of the box. I remember it took me 4 days & nights to assemble and 2 more days & nights to paint it using Tamiya's Spraywork. I didn't paint the deck in wood color because that's too difficult for me, I painted it grey same as the hull. Last year I had another one built by "Toom". Local made PE (3 big sheets) added up the details to the ship. Skilled painting made the plastic deck looks wooden. He even scribed the lines on the hull sides (see 2nd image):

More images are available at this page:

[url]http://www.falconbbs.com/model51b.htm[/img]

Have fun building your Yamato & Nagato!

Impressive Songs:

All 10 Playlists that I created on Youtube:

http://www.youtube.com/user/ModelManiacThailand/playlists

Pan Flute Music (300 songs) (Most Popular, over 100K views):

https://www.youtube.com/playlist?list=PLUNb2zPxGTZO7alagEPsEMzgBkWt4-vKV

El Condor Pasa (Top 50) (World's most famous and my most favorite song):

http://www.youtube.com/playlist?list=PLUNb2zPxGTZOLKHbju350mLle4HkMhsb8

  • Member since
    February 2003
  • From: Thailand
Posted by Model Maniac on Wednesday, November 10, 2010 8:31 PM

Bill and Manstien, that issue has already been addressed. My modeler couldn't have known that.

Impressive Songs:

All 10 Playlists that I created on Youtube:

http://www.youtube.com/user/ModelManiacThailand/playlists

Pan Flute Music (300 songs) (Most Popular, over 100K views):

https://www.youtube.com/playlist?list=PLUNb2zPxGTZO7alagEPsEMzgBkWt4-vKV

El Condor Pasa (Top 50) (World's most famous and my most favorite song):

http://www.youtube.com/playlist?list=PLUNb2zPxGTZOLKHbju350mLle4HkMhsb8

  • Member since
    February 2003
  • From: Thailand
Posted by Model Maniac on Wednesday, November 10, 2010 8:44 PM

Wojszwillo

1)

Black color fishing line:

http://www.mikado.pl/catalog/zylki_i_plecionki/zylki/feeder/

She is 0,2 mm tick i.e. 0,0079''

There are and 0,06 mm tick fishing lines, i.e. 0,0024''

2)

I saw weathering, but have tought that grey plastic is leaved without painting.

Sorry, if I was mistaken.

Thanks for the link! It'll be handy if I can't find .003 & .004 lines locally, and .0024 is even finer.

No problem. Maybe the grey color is too light. A local IJN ship nerd suggested that it should be in darker grey tone.

Impressive Songs:

All 10 Playlists that I created on Youtube:

http://www.youtube.com/user/ModelManiacThailand/playlists

Pan Flute Music (300 songs) (Most Popular, over 100K views):

https://www.youtube.com/playlist?list=PLUNb2zPxGTZO7alagEPsEMzgBkWt4-vKV

El Condor Pasa (Top 50) (World's most famous and my most favorite song):

http://www.youtube.com/playlist?list=PLUNb2zPxGTZOLKHbju350mLle4HkMhsb8

  • Member since
    February 2003
  • From: Thailand
Posted by Model Maniac on Wednesday, November 10, 2010 8:51 PM

subfixer

 

 Model Maniac:

 

 

 

 As for those CAD lines, I saw the real ship in the same class and it also has them. So I think there's no problem with them. 

 

Thank you very much for your kind compliments on the build. You're right that "Niphon" couldn't have known about those CAD lines. I didn't know either!

 

 

 

 

You saw the other ship in the class? That is pretty amazing, I didn't know you were a diver. The other ship in the class with Mutsu  was Nagato which was sunk by an atomic bomb test in Bikini Atoll.

 

I mean I saw pictures of the real ship in the same class, but then some words were missing.

Impressive Songs:

All 10 Playlists that I created on Youtube:

http://www.youtube.com/user/ModelManiacThailand/playlists

Pan Flute Music (300 songs) (Most Popular, over 100K views):

https://www.youtube.com/playlist?list=PLUNb2zPxGTZO7alagEPsEMzgBkWt4-vKV

El Condor Pasa (Top 50) (World's most famous and my most favorite song):

http://www.youtube.com/playlist?list=PLUNb2zPxGTZOLKHbju350mLle4HkMhsb8

  • Member since
    April 2005
Posted by ddp59 on Wednesday, November 10, 2010 9:33 PM

ships do not have those lines as tho the hull is built with building blocks just like brick\concrete block houses are not built like that. you have no strength in that hull. your builder should have realized something was not right when he saw that hull like that or does he just get paid to build without thinking about those problems. i build both kits of various scales & scratchbuild 1/144 scale ships but those ships have both long & short plates depending on the shape of the hull.

  • Member since
    September 2010
Posted by potchip on Wednesday, November 10, 2010 10:35 PM

Well...to each and his own. Some build for build, like weathering for weathering's sake. Not saying that's anything wrong with any of these approaches as the hobby is a hobby and is to be enjoyed by the hobbist.

It doesn't take much time to do some research though and personally I find it immensely fun part of the hobby. It also lets you build something that's 'different' to the rest if you dug that much deeper and can define specific details in a build.

Maniac's question on why would one build 2 ships of the same class is a good example, guess it is expected from a non-ship builder? Every ship throughout its life, basically every time it enters a dock may came out different. Same ships of the same class are never the same etc etc. The fun is to spot the differences and distinguish your build.

As on those lines on the hull, outwardly they are either wield lines or plating (one on top of another so it is stepped arrangement. Scribing is an easy way out for 1/700 scale, just to catch the wash so they are defined. But at 1/350 scale, the 'seam' is a mis-representation.

With regards to ensigns/flags, the standard procedure is whilst docking, the flag is at stern, and whilst underway flag is i think at bow. Also the flag used on the build seems to be the admiralty flag, which is not displayed on the bow/stern but rather on top of the mast. The flags on bow/stern is typically the hinomaru without the 'rays'. Then the flags on the main mast are again different typically a larger size and it's position changes depending on what the ship's task is etc etc..Will this is approaching nitpicking territory.

  • Member since
    March 2004
  • From: Spartanburg, SC
Posted by subfixer on Thursday, November 11, 2010 12:05 AM

CAD (computer aided drawing) lines are used when rendering a a drawing in 3 dimensions on a computer. When we refer to CAD lines in the Mutsu, we are referring to the lines that the mold maker mistakenly included in the production of the mold. These CAD lines, loft lines in particular, help to form the framework that the skin is applied to. They are not supposed to be there, they were supposed to have been removed before the drawing was sent to the mold maker. They are not meant to show hull plating.

Here is a video that shows what we are referring to:

http://www.youtube.com/watch?v=-5XBa9xoKp4&playnext=1&list=PL90346F501AF51DF9&index=7

I'm from the government and I'm here to help.

  • Member since
    August 2005
  • From: Mansfield, TX
Posted by EdGrune on Thursday, November 11, 2010 6:14 AM

potchip

With regards to ensigns/flags, the standard procedure is whilst docking, the flag is at stern, and whilst underway flag is i think at bow. Also the flag used on the build seems to be the admiralty flag, which is not displayed on the bow/stern but rather on top of the mast. The flags on bow/stern is typically the hinomaru without the 'rays'. Then the flags on the main mast are again different typically a larger size and it's position changes depending on what the ship's task is etc etc..Will this is approaching nitpicking territory.

The traditions surrounding the display of flags varies by country.   Another opportunity for research.  

In the USN the Ensign (national flag) is flown at the stern (between sunrise & sunset) when anchored or moored.     The Jack is flown from the bow.     As soon as the anchor is aweigh or the last mooring line is let go the colors are shifted.   The Ensign is flown from the main mast and the Jack is lowered.    A ship can be drifting between piers undergoing inclining tests and still be considered to be 'underway'.  The definition of the main mast varies by ship.   Generally it is the aft-most, not the highest.   For example,  on a Fletcher destroyer it is a gaff on the aft stack.

There are instances where another country's flag may be flown from a yardarm as an honor to the host country.   

Not nitpicky if you or your builder insist on continually doing it otherwise after having the traditions explained to you

  • Member since
    November 2010
Posted by Firedeck on Thursday, November 11, 2010 10:24 AM

 Last year I had another one built by "Toom". Local made PE (3 big sheets) added up the details to the ship. Skilled painting made the plastic deck looks wooden. He even scribed the lines on the hull sides (see 2nd image):

 

thanks for including the pics, MM, but Interesting enough, when looking for pics online of decent 1/350 Yamato builds, I ran across these while ago and had saved them in my build folder already! 

Those old jap battlewagons   -beautiful designs...but daughting builds!

 

 

   

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.